Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"INTERMETALLIC GROWTH"”.
-
Intermetallic growth at the interface between copper and bismuth-tin solder
… needs to be evaluated with respect to brittle intermetallic formation. In the binary Bi-Sn alloys both the Cu6Sn5 and Cu3Sn intermetallic phases were found at the Cu/ solder interface after exposure at 250 deg C, 300 deg C, and 350 deg C. Bi-Sn-Sb alloys were also studied and in addition to the …
-
Studies of intermetallic growth in Cu-solder systems and wettability at solid-liquid interfaces
… is characterized by the formation of an intermetallic compound layer. The growth of the intermetallic layer is the result of competing mechanisms, growth of the intermetallic at the intermetallic/copper interface and its dissolution at the intermetallic/liquid solder interface. These were …
-
Effect of Intermetallic Growth on Durability of High Temperature Solders (SnAg, SAC305, SAC+Mn, SnAg+Cu Nano) in Thermal and Vibration Environments
… hours were performed to measure the interfacial intermetallic thickness, assess intermetallic compounds, and view the microstructure. A durability assessment was performed featuring thermal cycling ranges of -40 to 185°C and -40 to 200°C intermixed with 50G vibration cycling to determine the most …
-
EFFECT OF CERIUM AND MAGNESIUM ADDITIONS ON THE STRENGTH AND MORPHOLOGY OF THE INTERMETALLIC COMPOUND LAYERS IN ALUMINUM-STEEL DISSIMILAR CASTINGS
… opportunities. An interface comprised of intermetallics, generally Fe4Al13 and Fe2Al5, forms between the two components with the latter forming nearest the steel. Cerium and magnesium additions to the aluminum component of the casting were investigated to increase the integrity of the …
-
Investigating Fuel Cladding Coating Materials for Accident Tolerant Fuels
… predictions, creating kinetic data to predict intermetallic growth rates outside of experimental conditions, and determining the impact, if any, to the long-term structural integrity of coated cladding. It was found in the case of Fe70Cr20Fe10 (FeCrAl) coating that the intermetallics Zr3Fe and …
-
MICROSTRUCTURAL CHARACTERIZATION AND THERMAL CYCLING RELIABILITY OF SOLDERS UNDER ISOTHERMAL AGING AND ELECTRICAL CURRENT
… bulk microstructure and increased interfacial intermetallic compounds at the solder-pad interface. The coarsening of the solder bulk degrades the creep properties of solders, whereas the voiding and brittleness of interfacial intermetallic compounds leads to mechanical weakness of the solder …
-
Characterization and Modeling of Intermetallic Phases Formed During Soldering of Sn-Pb-Ag Alloy on Copper Substrates
In solder-copper diffusion couples an intermetallic compound layer forms when tin in the solder alloy reacts with the copper substrate. During reflow soldering, the intermetallic compound may also dissolve from the layer into the molten solder. Experimental studies using 62% tin-36% lead-2% silver …
-
Increasing the Manufacturing Readiness of Refill Friction Stir Spot Welding
… the toolset seized from material accumulation/growth. At a one-second welding condition, the toolset was only capable of producing 53 welds before seizure. At a two-second welding condition, the toolset was only capable of producing 48 welds. In subsequent temperature experiments, thermocouples …
-
Effects of intermetallic compound formation on reliability of Pb-free Sn-based solders for flip chip and three-dimensional interconnects
The effects of intermetallic compound (IMC) formation on reliability of Pb-free Sn-based solders for flip chip and three-dimensional (3D) interconnects were studied. The dissertation is organized into four parts. In the first part, the effect of Sn grain orientation on electromigration (EM) …
-
Effect of Cooling Rate on Aluminium-Containing High-Entropy Alloys
… system displayed a microstructure dominated by intermetallics and very brittle mechanical behaviour. The x = 1.0 and x = 1.3 alloys showed Al-Ni intermetallic needles in their interdendritic regions which adhere closely to dendrite peripheries. The x = 1.0 alloy was processed for rapid …
-
Intermetallic phases formed during galfanizing
… with Galfan is to produce a coating which has no intermetallic phases in the coating but this condition is not always achieved. Though it is important, the nature of the intermetallic phases and the mechanisms of their formation and growth during Galfanizing are far from fully understood. The …
-
Corrosion-induced failure analysis of Cu wire bonded packages
… Cu-Al ball-bond interface, two thin layers of intermetallics, Cu9Al4 and CuAl2, are sandwiched between the Cu wire and the Al pad. Accelerated humidity reliability tests showed Cu9Al4 disappeared, while Cu, CuAl2, and Al remained. The disappearance of Cu9Al4 cannot be explained based on the …
-
Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints
… solder joint reliability is the thickness of intermetallic compound (IMC) layer formed between the solder and the substrate. Although the formation of an IMC layer signifies good bonding between the solder and substrate, its main disadvantage is that it is also known to be the most brittle …
-
Modeling, design and demonstration of ultra-short, fine-pitch solder-based interconnection systems with high-throughput assembly
… increase in the volumetric contribution of intermetallics, raising serious concerns for stress management and reliability. Fine control of interfacial reactions is, therefore, key in extending solder-based interconnections to finer pitches and constitutes the first challenge addressed in …
-
ΜΕΛΕΤΗ ΔΙΑΧΥΤΙΚΗΣ ΑΝΑΠΤΥΞΗΣ ΤΗΣ ΔΙΑΜΕΤΑΛΛΙΚΗΣ ΦΑΣΗΣ FESN2 ΣΕ ΗΛΕΚΤΡΟΛΥΤΙΚΗ ΕΠΙΚΑΣΣΙΤΕΡΩΣΗ
… OF TINPLATE PRODUCTION ON DIFFUSION CONTROL GROWTH OF THE INTERMETALLIC COMPOUND FESN2 HAS BEEN INVESTIGATED. ANALYSIS OF THE DIFFUSION PROFILES AND MEASUREMENTS OF VOLUME DIFFUSION COEFFICIENTS SHOW THE DEPENDENCE OF THE DIFFUSION PROCESS FROM THE CONDITIONS OF THE SUBSTRATE CLEANING, THE …
-
Transient Liquid Phase Bonding for High Temperature Interconnects
… TLPB takes advantage of the formation of solid intermetallic compounds (IMC) formed by interdiffusion between a liquid phase, low-melting temperature component, such as Sn or a Sn alloy, and a solid, high-melting temperature component, such as Cu, Ni, or Ag. In conventional soldering, relatively …