Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 558 for “"ION IMPLANTATION"”.
-
Ion Implantation Damage in Semiconductors
The diffuse X-ray scattering from defects in ion implanted Si was studied at implantation temperatures ranging from 100 K to 300 K, and the results were compared to simulations of the scattering intensity from realistic defects in Si. In situ studies of keV implants identified close Frenkel pair …
-
Ion Implantation Damage in Solids
Ion induced surface smoothing and roughening processes were studied using Molecular Dynamics (MD) computer simulation. The simulations on self-ion bombarded W showed the effect of the surface on defect production and the roughening of the surface. The simulations on the CuTi, Ag and Ni with …
-
Computer Simulation of Ion Implantation
<p>In this work, a computer simulation for ion implantation has been carried out based on a simplified random model. This simulation has been used to obtain range profiles and deposited damaging energy distributions, for any system and for a wide energy range. The obtained distributions show good …
-
Ion Implantation Damage in Quartz
… is a report on a series of measurements of ion-bombardment effects on α-quartz crystals. Damage was produced in α-quartz (single-crystal SiO₂) by bombarding with ions of ⁴He⁺ to ²⁰⁹Bi⁺⁺ in the energy range of 15 - 200 keV, at both 300 K and ≤ 50 K. The samples were analysed in - situ with …
-
Ion implantation for silicon solar cells
Ion implantation is investigated as a method for forming the heavily doped regions of silicon solar cells. Research is conducted with the aim of implementing ion implantation into the fabrication process of the Australian National University's interdigitated back contact and Sliver solar cell …
-
Quantum well intermixing by ion implantation
… out in this study explored the phenomenon of ion implantation induced intermixing in quantum well structures. Two quantum well systems were investigated; the unstrained GaAs/Al_xGa_(1-x)As system, and the strained In_xGa_(1-x)As/GaAs system. Previous results from proton and arsenic …
-
Ion Implantation Synthesis of Silicon Carbide
… on the surface were implanted with 50 keV N⁺ ions at a dose of 1x10¹⁶ ions/cm² at room temperature. The implanted samples were cut to several pieces and annealed in vacuum (at a pressure of 5x10⁻⁸ torr) at temperatures of 800°C and 900°C, and inert gas at a temperature of 1000°C for 30 …
-
Laser-Spark Multicharged Ion Implantation System ‒ Application in Ion Implantation and Neural Deposition of Carbon in Nickel (111)
Carbon ions generated by ablation of a carbon target using an Nd:YAG laser pulse (wavelength λ = 1064 nm, pulse width τ = 7 ns, and laser fluence of 10-110 J/cm2) are characterized. Time-of-flight analyzer, a three-mesh retarding field analyzer, and an electrostatic ion energy analyzer are used to …
-
Ion-implantation for defect engineering in silicon
… Moore’s law, and a continuous reduction in feature size. At such small sizes, the time delay from metal interconnections far outweighs the delay across transistor gates, restricting the global chip operating speed, suffering high power loss and low bandwidth. Photonic interconnections …
-
Experimental ion implantation system for decaborane ions
Future generations of Si technology will require ultra shallow junctions (tens of nm) in the drain and source regions of MOS transistors. Fabrication of such shallow p-type junctions requires implantation of boron at ultra low energies (< 1 keV), below the limits of standard ion implantation …
-
Image Charge Detection for Deterministic Ion Implantation
Image charge detection is presented as a possible candidate to realise deterministic ion implantation. The deterministic placement of single impurities in solid substrates will enable a variety of novel applications, using their quantum mechanical properties for sensors or qubit registers. In this …
-
Three-dimensional Monte Carlo simulation of ion implantation
A physically-based 3-dimensional Monte-Carlo simulator has been developed within UT-MARLOWE, which is capable of simulating ion implantation into multi-material systems and arbitrary topography. Introducing the third dimension can result in a severe CPU time penalty. In order to minimize this …
-
Modelling and simulation of ion implantation induced damage
In the modeling and simulation of ion implantation induced damage, damage kinetics during the implantation process, damage evolution, amorphization and recrystallization must be accurately simulated. This has been modeled by the recrystallization of damage structures known as the amorphous pockets. …
-
Plasma source ion implantation of high voltage electrodes
Field emission and breakdown characteristics of high voltage, large area electrodes determine the performance of many vacuum-based electron sources. A corroborative project with the Thomas Jefferson National Accelerator Facility involves studying the behavior of such electrodes after nitrogen ion …
-
Helium Ion Implantation in Zirconium: Bubble Formation & Growth
… of the metal were implanted with 140 keV helium ions to a total fluence of 3×10^17 cm^−2 and characterized in cross-section TEM in their as-implanted state as well as during annealing at different temperatures. The three zirconium alloys included high-purity crystal bar material, Zircaloy-4, and a …
Page 1 of 28