Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 164 for “"ISM Band"”.

  1. ACTIVE PHASED ARRAY AT ISM BAND

    … active phased array operating in the 2.4GHz ISM band is constructed using variable gain LNAs and linear phase 360° phase shifters to attain independent amplitude and phase control in each branch of the array. This active array eliminates the use of attenuators for the purpose of gain control …

    nus Repository record for ACTIVE PHASED ARRAY AT ISM BAND (opens in a new tab) Download file for ACTIVE PHASED ARRAY AT ISM BAND (opens in a new tab)

  2. Antenna design for 2.4 GHz ISM band

    The utilization of 2.4 GHz ISM band has experienced enormous growth in the last 5 years. A lot of research has been conducted on the design of antennas operating inside this band. The limited space on the circuit board for the RF module imposes a limit on the physical size available for the …

    nus Repository record for Antenna design for 2.4 GHz ISM band (opens in a new tab) Download file for Antenna design for 2.4 GHz ISM band (opens in a new tab)

  3. ISM-Band Energy Harvesting Wireless Sensor Node

    … node in 22nm FDSOI technology working in the ISM band for energy harvesting and wireless data transmission. The sensor node encompasses power-efficient circuits, including an RF energy harvesting module equipped with a multi-stage RF Dickson rectifier, a robust power management unit, a DLL and …

    arkansas Repository record for ISM-Band Energy Harvesting Wireless Sensor Node (opens in a new tab)

  4. An ISM Band Communication System—A System Design

    … thesis establishes the feasibility of using the ISM band for a wireless network to connect students to campus computer network. A variable rate, asymmetric link with a maximum capacity of 200 kb/s per user can be provided within the regulation of the ISM band. A system with four basestation sites …

    sask Repository record for An ISM Band Communication System—A System Design (opens in a new tab)

  5. 16 QAM Radio Link on the 5.7 GHz ISM Band

    … and more cost—effective as time goes on. The ISM band is used in order to avoid licensing issues. This band requires that spread spectrum modulation with a spreading gain greater than or equal to 10 be used. To get a full complement of music channels on the ISM bandwidth requires a high order …

    sask Repository record for 16 QAM Radio Link on the 5.7 GHz ISM Band (opens in a new tab)

  6. Energy-Efficient Wake-up Receivers for 915-MHz ISM Band Applications

    … lowering the data rate as well as the detection bandwidth of the receiver in the MO mode. The proposed wake-up receiver has been designed and fabricated in IBM 130 nm technology with a core size of about 0.2 mm2 for the target frequency range of 902-928 MHz. The measured results show that the …

    concordia Download PDF for Energy-Efficient Wake-up Receivers for 915-MHz ISM Band Applications (opens in a new tab)

  7. Blind Signal Detection and Identification Over the 2.4GHz ISM Band for Cognitive

    … There is growing interest towards providing broadband communication with high bit rates and throughput, especially in the ISM band, as it was an ignition of innovation triggered by the FCC to provide, to some extent, a regulation-free band that anyone can use. But with such freedom comes the risk …

    usf Repository record for Blind Signal Detection and Identification Over the 2.4GHz ISM Band for Cognitive (opens in a new tab)

  8. Study of antenna structures with small dimensions at 5.8 GHz ISM Band

    … dimension smaller than half wavelength and wide bandwidth can be found. That is why nowadays for any industry related to antenna designing and development feels interested with microstrip antenna for its products. Most components or systems need the microstrip antenna to work for a small range …

    chalmers Repository record for Study of antenna structures with small dimensions at 5.8 GHz ISM Band (opens in a new tab)

  9. Design and Prototyoing of a Wireless Data Transceiver in the 900MHz ISM Band

    … rate attempts to travel the allotted channel bandwidth in the frequency band of interest. Also, limitations imposed by current radio transceiver technology tend to limit WDL design. The existing sponsor's wired system operates at a 9600 Baud, and presented the opposite problem: the data rate …

    vt Repository record for Design and Prototyoing of a Wireless Data Transceiver in the 900MHz ISM Band (opens in a new tab)

  10. Cyclostationary Signal Detection and Doppler Rate Correction for LEO Nanosatellites in the ISM Band

    … in the industrial, scientific and medical (ISM) band and Doppler shifts occurring in the satellite downlink. In this case, it is useful to have the more general information whether the satellite’s signal is present or not. Moreover, in the next step towards demodulation, the frequency offset …

    nps Repository record for Cyclostationary Signal Detection and Doppler Rate Correction for LEO Nanosatellites in the ISM Band (opens in a new tab)

  11. Prediction of wireless communication systems performance in shipboard compartments in the 2.4 GHz ISM band

    … in the 2.4 GHz Industrial Scientific Medical (ISM) band. More specifically, using NEC-BSC the coverage area, the number and positions of transmitters and observation points and the statistics of Radio Frequency (RF) signal distribution were described. The area specifically targeted for this …

    nps Repository record for Prediction of wireless communication systems performance in shipboard compartments in the 2.4 GHz ISM band (opens in a new tab)

  12. Effects of shipboard compartment fuel fire and fire extinguishing on RF signal propagation in the 24 GHz ISM band

    … wireless shipboard communications in the 2.4 GHz ISM band. Directional and non-directional antennas with horizontal and vertical polarization, and a PC-controlled scalar network analyzer, were used onboard ex-USS SHADEWELL to measure the attenuation of 2.4 - 2.485 GHz signals transmitted through …

    nps Repository record for Effects of shipboard compartment fuel fire and fire extinguishing on RF signal propagation in the 24 GHz ISM band (opens in a new tab)

  13. Design and development of a frequency hopper based on the DECT system for the 902-928 MHz ISM band

    … 15 rules for transmissions in the 902-928 MHz ISM band. A theoretical design of a slow frequency hopper (SFH) based on an existing DECT RF front end and a custom-designed system controller was developed. An innovative FH synchronization technique that eliminates the need for a separate FH …

    vt Repository record for Design and development of a frequency hopper based on the DECT system for the 902-928 MHz ISM band (opens in a new tab)

  14. TOWARD ENHANCED WIRELESS COEXISTENCE IN THE 2.4GHZ ISM BAND VIA TEMPORAL CHARACTERIZATION AND EMPIRICAL MODELING OF 802.11B/G/N NETWORKS A DISSERTATION

    … other wireless technologies in using the crowded ISM band more efficiently and achieve enhanced wireless coexistence. Empirical models of 802.11 networks in the 2.4 GHz Industrial, Scientific, and Medical (ISM) band are also presented. This information can assist other wireless technologies aiming …

    oklahoma-thes Repository record for TOWARD ENHANCED WIRELESS COEXISTENCE IN THE 2.4GHZ ISM BAND VIA TEMPORAL CHARACTERIZATION AND EMPIRICAL MODELING OF 802.11B/G/N NETWORKS A DISSERTATION (opens in a new tab)

  15. Countering the parking lot attack: employing monopulse radar methods to detect and geo-locate RF targets operating in the 2.4 GHz ISM band

    <p>Many attacks on information systems occur when an adversary exploits wireless networking technology to remotely gain access to sensitive or confidential data housed within a targeted facility. Where such attack vectors exist, even the most stringent physical security safeguards can fail in …

    iastate Repository record for Countering the parking lot attack: employing monopulse radar methods to detect and geo-locate RF targets operating in the 2.4 GHz ISM band (opens in a new tab)

  16. A PLL frequency synthesizer and Gilbert cell multiplier for a 916 MHz ISM band transmitter realized in 0.5 [mu]m [i.e. micrometer] CMOS technology

    … Gilbert cell multiplier to implement a 916MHz ISM band transmitter in 0.5μm CMOS technology. The transmitter is designed for implementing distributed biosensor systems for environmental monitoring.</p> <p>The transmitter is described from a system level with the discussion of design issues …

    ut-knoxville Repository record for A PLL frequency synthesizer and Gilbert cell multiplier for a 916 MHz ISM band transmitter realized in 0.5 [mu]m [i.e. micrometer] CMOS technology (opens in a new tab)

  17. Physical Layer Simulation Study for the Co-existence of WLAN Standards

    … the performance of devices within the 2.4 GHz ISM Band. Due to the ISM Band being unlicensed and free to all users, there is an abundance of devices within this frequency range. The three most prominent of such devices used for data communication consist of Bluetooth, Wifi, and Zigbee. In order …

    ut-knoxville Repository record for Physical Layer Simulation Study for the Co-existence of WLAN Standards (opens in a new tab)

  18. Physical Layer Design for a Spread Spectrum Wireless LAN

    … design for a direct sequence spread spectrum ISM band radio LAN system. This radio system employs spread spectrum communication technology and a differential binary phase shift keying/quadrature phase shift keying (BPSK/QPSK) non-coherent receiver to overcome the adverse indoor wireless …

    vt Repository record for Physical Layer Design for a Spread Spectrum Wireless LAN (opens in a new tab)

Page 1 of 9