Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"ISO 26262"”.

  1. Using STPA in an ISO 26262 compliant process

    … The introduction of automotive standard ISO 26262 has garnered a lot of interest and the industry is moving towards following ISO 26262 compliant processes. Although the standard suggests using traditional hazard analysis techniques to identify hazards and to perform safety analyses, a …

    mcmaster Repository record for Using STPA in an ISO 26262 compliant process (opens in a new tab)

  2. Checking Compliance with ISO 26262 using Conceptual Modeling as a Tool

    … the need of safety assurance of road vehicles. ISO 26262 is a safety critical standard intended to be applied to safety-related E/E systems in passenger cars. The standard also addresses the possible hazards caused by the failure of these systems and uses a risk-based approach to ensure …

    mcmaster Repository record for Checking Compliance with ISO 26262 using Conceptual Modeling as a Tool (opens in a new tab)

  3. Safety mechanisms for random ECU hardware failures in compliance with ISO 26262

    … level in their vehicles. As a response, the ISO 26262 functional safety standard will be introduced for heavy-duty vehicles in 2018. Therefore, the hardware and software solutions developed by Volvo Group Trucks Technology will need to be adapted to comply with this standard. In addition to …

    chalmers Repository record for Safety mechanisms for random ECU hardware failures in compliance with ISO 26262 (opens in a new tab)

  4. Implementing ISO 26262-5: A guide to Functional Safety for Product Development at Hardware Level

    … safety is therefore a fact. The standard ISO 26262 is produced specifically for the automotive industry and presents procedures and requirements for manufacturers to follow. This report focuses on ISO 26262-5 which is product development on hardware level. Before starting with the ISO …

    chalmers Repository record for Implementing ISO 26262-5: A guide to Functional Safety for Product Development at Hardware Level (opens in a new tab)

  5. Development of a Steer-By-Wire application in MATLAB/Simulink

    … – an open automotive software architecture and ISO 26262 – an ISO safety related standard for passenger cars. The project aims to develop a steer-by-wire application for a car simulator. To achieve that, MATLAB/Simulink has been chosen by Mecel as the application development tool, in which we …

    chalmers Repository record for Development of a Steer-By-Wire application in MATLAB/Simulink (opens in a new tab)

  6. Evaluating Component Reliability in Safety Applications through Failure Analysis

    … approaches are considered: one featuring an ISO 26262 non-compliant ideal-diode controller (LM74700) and the other incorporating a compliant alternative (STPM801). The study assesses the impact of component reliability through failure-analysis techniques, such as, failure modes, effects, and …

    chalmers Repository record for Evaluating Component Reliability in Safety Applications through Failure Analysis (opens in a new tab)

  7. Bayesian Validation Based Fault Tree Analysis for Enhancing Autonomous Vehicle Safety

    … environments remains a critical challenge. While ISO 26262 provides a robust framework for functional safety, it primarily focuses on hazards arising from hardware or software malfunctions. The Safety of the Intended Functionality (SOTIF), defined in ISO 21448, extends the traditional ISO 26262 …

    ottawa-retro Repository record for Bayesian Validation Based Fault Tree Analysis for Enhancing Autonomous Vehicle Safety (opens in a new tab)

  8. Binary-Level Fault Injection (BLFI) for AUTOSAR-based Systems

    … development of automotive software. ISO 26262 is a functional safety standard for road vehicles which provides requirements and processes for developing robust automotive systems. Fault injection and interface testing are robustness assessment methods recommended by ISO 26262. This …

    chalmers Repository record for Binary-Level Fault Injection (BLFI) for AUTOSAR-based Systems (opens in a new tab)

  9. A Modular Real-Time Fault Handling Framework for Propulsion Subsystems of McMaster EcoCAR Electric Vehicle (EV) Challenge Cadillac LYRIQ

    … International Organization for Standardization (ISO) 26262. In addition, using the safety analysis results and ISO 26262, this research defined customized fault detection logic, fault confirmation algorithms, and mitigation methods to ensure the team vehicle can always operate safely. …

    mcmaster Repository record for A Modular Real-Time Fault Handling Framework for Propulsion Subsystems of McMaster EcoCAR Electric Vehicle (EV) Challenge Cadillac LYRIQ (opens in a new tab)

  10. Functional Safety Assessment in Autonomous Vehicles

    … a revision of functional safety standard ISO 26262 to support autonomous vehicles and the underlying electronic/electrical control architecture. There is a need to modify the Automotive Safety Integrity Levels (ASILs) defined in the ISO 26262 as "Controllability", a factor in determining …

    vt Repository record for Functional Safety Assessment in Autonomous Vehicles (opens in a new tab)

  11. Evaluation of open source operating systems for safety-critical applications

    … standard for functional safety, such as the ISO 26262 standard for the automotive industry. However, the standards for functional safety do not provide a clear method for how one would go about certifying open source software. Therefore, in this thesis we present identified important …

    chalmers Repository record for Evaluation of open source operating systems for safety-critical applications (opens in a new tab)

  12. Automotive Mechatronic Safety Argument Framework

    … according to the functional safety standard ISO 26262:2011. This standard requires that a safety argument is created that demonstrates that the safety requirements for an item are complete and satisfied by evidence. However, this argument only addresses the software and electronic hardware …

    whiterose Download PDF for Automotive Mechatronic Safety Argument Framework (opens in a new tab)

  13. Using Boundary Objects for Continuous Compliance in Automotive Development

    … safety obligations defined by standards such as ISO 26262 remain traceable and actionable throughout the development life-cycle. In this thesis, we introduce an approach that combines model-based engineering and the boundary objects methodology to link standard-driven safety activities with agile …

    mcmaster Repository record for Using Boundary Objects for Continuous Compliance in Automotive Development (opens in a new tab)

  14. Evaluation of validity of verification methods: Automating functional safety with QuickCheck

    … in AUTOSAR 4.0.3 were discovered. Some ISO 26262 requirements are achievable with the use of QuickCheck, but it is not possible to achieve functional safety using only QuickCheck. This is mainly because AUTOSAR is written in informal syntax and can not help verify the model. Coverages …

    chalmers Repository record for Evaluation of validity of verification methods: Automating functional safety with QuickCheck (opens in a new tab)

  15. Analysis of ISO26262 standard application in development of steer-by-wire systems

    … processes with the upcoming standards like ISO 26262 standard. This work aims to perform the comparative analysis of the processes applied in regard to the software development, as implemented in a specific project. Besides the analysis, as a result of this work, a tool to support Fault Tree …

    chalmers Repository record for Analysis of ISO26262 standard application in development of steer-by-wire systems (opens in a new tab)

  16. Využití neuronové sítě pro řízení energetického toku elektromobilu

    … z hlediska funkční bezpečnosti podle normy ISO 26262 a požadavků na systémy umělé inteligence dle ISO/IEC 42001.

    brno-tech Repository record for Využití neuronové sítě pro řízení energetického toku elektromobilu (opens in a new tab)

  17. Robustness Testing of AUTOSAR Software Components

    … standards within functional safety, such as ISO 26262, raises the need for methods suitable for software testing within the latest frameworks. In this master's thesis an automatic tool for robustness testing of AUTOSAR software components (SW-C) is presented. By using the interface speci …

    chalmers Repository record for Robustness Testing of AUTOSAR Software Components (opens in a new tab)

  18. Development of a Method to Evaluate Product Defects in Trucks - Creation of a method to simplify recall decision process of a defect that can lead to personal injuries

    … The hazard analyses most used are FMEA and ISO 26262, where it is found that each defect should be evaluated with regards to severity, probability of exposure and controllability. Severity rating tables are created by studying data from STRADA, injuries in maintenance and efficiency of …

    chalmers Repository record for Development of a Method to Evaluate Product Defects in Trucks - Creation of a method to simplify recall decision process of a defect that can lead to personal injuries (opens in a new tab)

Page 1 of 3