Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 104 for “"ISO standard"”.

  1. Effectiveness of roof overhang on mid-rise buildings: field measurements and improved assessment based on ISO standard

    … generally subjected to overestimation in comparison with measured wind driven-rain. The accuracy of ISO method can be improved significantly by using more accurate wall factors calculated based on onsite measurements. Moreover, the effectiveness of roof overhang in reduction of wind driven-rain …

    concordia Download PDF for Effectiveness of roof overhang on mid-rise buildings: field measurements and improved assessment based on ISO standard (opens in a new tab)

  2. UAB „Šiaulių vandenys“ paslaugų kokybės tobulinimas /

    … quality evaluation models. Implementation of the ISO standard reasons and benefits in the company and presentation of the quality management principles are included in the final bachelor thesis. The opinions of customers and employees are analyzed in empirical part of the thesis. The questionnaire …

    vilnius Repository record for UAB „Šiaulių vandenys“ paslaugų kokybės tobulinimas / (opens in a new tab)

  3. Kokybės valdymo efektyvumas sveikatos priežiūros įstaigose, taikant kokybės vadybos sistemas /

    … is still such an opinion in Lithuania, that ISO standard is the guarantee and proof of company’s well proceeding and client’s service quality. Though nowadays ISO standard is loosing it’s validity – QMS are being introduced in healthcare institutions just for prestige and as a formal …

    vilnius Repository record for Kokybės valdymo efektyvumas sveikatos priežiūros įstaigose, taikant kokybės vadybos sistemas / (opens in a new tab)

  4. Seat Sublime: A Recommendation System to Accommodate User Preference in Concert Hall Seating Selection

    … the acoustical performance of the hall. The 3382 ISO standard for performance spaces identifies certain key acoustical metrics for the hall, which are generally calculated as averages for the entire hall. Designers of the hall must also accommodate requirements to provide a certain number of …

    washington Repository record for Seat Sublime: A Recommendation System to Accommodate User Preference in Concert Hall Seating Selection (opens in a new tab)

  5. Utvärdering av en värmeväxlarpanel

    … gjordes var att testerna inte utfördes enligt ISO-standard, vilket skulle innebära en sluten kammare, stationära förhållanden och noggrant kalibrerad utrustning med mycket små mätfel. Det togs heller inte hänsyn till tryckskillnader i luftsystemet. Kyleffekten blev som bäst 83.0 W och …

    chalmers Repository record for Utvärdering av en värmeväxlarpanel (opens in a new tab)

  6. Extensible 3D (X3D) graphics clouds for geographic information systems

    … and X3D Earth. This thesis took advantage of iso-standard X3D graphics and X3D Edit in conjunction with manually produced image textures to represent 3D clouds. While a 3D geospatial viewing might never completely characterize the current state of the atmosphere, a sufficiently realistic …

    nps Repository record for Extensible 3D (X3D) graphics clouds for geographic information systems (opens in a new tab)

  7. Phigs based phong rendering emulation Software

    … models using the Phong shading technique. The ISO standard for 3D graphics, PHIGS, provides for wireframe display and manipulation of graphics data. PHIGS + implementations, while providing this capability, will not be widely available for some time. This capability will provide a generally …

    vt Repository record for Phigs based phong rendering emulation Software (opens in a new tab)

  8. Improving the enrichment procedure for Enterobacteriaceae detection

    The current ISO standard method for detection of Enterobacteriaceae (21528-1:2004) includes enrichment in EE broth, which has been shown to be inhibitory to some members of this family, notably Cronobacter spp. A shortened procedure omitting the EE broth has been proposed, however competition from …

    zurich

  9. Tire Warmup Relation to Rolling Resistance: Understanding how rolling resistance affects and is affected by tire temperature in realistic driving scenario

    … through the cycle and rarely matched the ISO standard rolling resistance value. Depending on the tire, it was found that the transient rolling resistance was 25-30% higher before reaching a steady state value. Data from the drive cycle test was used to calculate the rolling energy loss …

    chalmers Repository record for Tire Warmup Relation to Rolling Resistance: Understanding how rolling resistance affects and is affected by tire temperature in realistic driving scenario (opens in a new tab)

  10. Whole-body vibration and the lower back: The effect of whole-body vibration on pain in the lower back.

    … mean squared (r.m.s.) values in accordance with ISO standard 2631. Each subject completed a questionnaire regarding their general health, and specifically whether they experienced low back pain, and if so, the extent and severity of this pain. It was expected that the individuals subjected to the …

    wvu Repository record for Whole-body vibration and the lower back: The effect of whole-body vibration on pain in the lower back. (opens in a new tab)

  11. Benchmarking the Naval Systems Engineering Guide against Industry Standards

    … have been written or revised the International Standards Organization (ISO) Standard 15288 in 2008, the International Council on Systems Engineering (INCOSE) Systems Engineering Handbook in 2011, and The guide to the Systems Engineering Body of Knowledge (SEBoK) in 2012. This thesis compares the …

    nps Repository record for Benchmarking the Naval Systems Engineering Guide against Industry Standards (opens in a new tab)

  12. Procesų brandos lygių pagal CMMI ir ISO/IEC 15504 palyginimas /

    … been taken analysis of CMMI for Developement and ISO/IEC 15504 capability and maturity models, an algorithm of mapping basic elements of the models has been made, mapping of the basic elements of the models has been carried out. Paper also includes evaluation of ISO/IEC 15504 maturity …

    vilnius Repository record for Procesų brandos lygių pagal CMMI ir ISO/IEC 15504 palyginimas / (opens in a new tab)

  13. An interactive PHIGS+ model rendering system applied to postprocessing of spatial mechanisms

    … and color parameters using the international ISO standard for 3-D graphics, PHIGS (Programmer’s Hierarchical Interactive Graphic System), and its proposed extensions, PHIGS+. Perception and evaluation of spatial mechanism designs are significantly improved by the use of PHIGS+ functionality to …

    vt Repository record for An interactive PHIGS+ model rendering system applied to postprocessing of spatial mechanisms (opens in a new tab)

  14. Minimizing Planter Fan Exhaust Velocity to Reduce Environmental Effects

    … fan exhaust, the International Organization for Standardization (ISO) passed the ISO 17962 standard. It sets limits on the air velocity measured at a 2 m radius from the fan, and specifies that the exhaust from the fan must be directed groundward. In partnership with CNH Industrial, research was …

    sask Repository record for Minimizing Planter Fan Exhaust Velocity to Reduce Environmental Effects (opens in a new tab)

  15. 3D spausdinių stipruminių savybių tyrimas /

    … sample model for printing that complies with the ISO standard; Print samples of different parameters with a 3D printer assembled at home; to carry out tests and to carry out an analysis of the results obtained. The work examined the designs of 3D printers, their peculiarities. The samples are …

    vilnius Repository record for 3D spausdinių stipruminių savybių tyrimas / (opens in a new tab)

  16. Navigating the PDF/A standard: a case study of theses in the University of Oxford’s institutional repository

    … established by the International Organization of Standardization as the ISO 19005 standard for long-term preservation of electronic documents. While the ISO requirements of a well-formed PDF/A ensure sustainability and easy recovery of content, the standard restricts some document features from …

    uiuc Repository record for Navigating the PDF/A standard: a case study of theses in the University of Oxford’s institutional repository (opens in a new tab)

  17. Development of the RISE Vibration Monitor: RVM

    … related injuries in Sweden. There is an ISO-standard which is used to estimate how harmful vibrations are and how long one can be exposed without risking damage, however it does not take into account ultra high frequency vibrations, those above 1250 Hz. Recent studies indicate that these …

    chalmers Repository record for Development of the RISE Vibration Monitor: RVM (opens in a new tab)

  18. Field Measurements of Wind-Driven Rain on Mid - and High - Rise Buildings in Two Canadian Regions

    … of catch ratios and wall factors, and comparisons between measured and predicted wind-driven rain using the semi-empirical models are reported for the monitoring periods. The analysis of field measurements shows that catch ratios vary with rain events with higher values at the corners and …

    concordia Download PDF for Field Measurements of Wind-Driven Rain on Mid - and High - Rise Buildings in Two Canadian Regions (opens in a new tab)

Page 1 of 6