Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Ice templating"”.

  1. Příprava hybridních keramických materiálů metodou ice-templating

    Ice-templating, známý také jako freeze-casting, je relativně jednoduchou, levnou a velmi univerzální technikou pro výrobu porézních keramických struktur s řízenou mikrostrukturou. Takto připravené keramické struktury jsou použity pro výrobu hybridních keramických kompozitů, nebo jako biokeramické …

    brno-tech Repository record for Příprava hybridních keramických materiálů metodou ice-templating (opens in a new tab)

  2. Engineering aligned tissues: fundamental understanding of silk fibroin ice templating

    … freezing. Unidirectional freezing is an ice templating protocol that drives aligned ice crystal formation in solution. Aligned pores replace the ice crystals once the crystals are removed via freeze-drying or thawing. This thesis presents a simple unidirectional freezing setup that could …

    unsw Repository record for Engineering aligned tissues: fundamental understanding of silk fibroin ice templating (opens in a new tab)

  3. Development of Cartilage-Derived Matrix Scaffolds via Crosslinking, Decellularization, and Ice-Templating

    … collagen crosslinking techniques as well as ice-templating in order to enhance the mechanical properties of CDM scaffolds and prevent cell-mediated contraction. Furthermore, the decellularization of CDM was investigated in order to remove possible sources of immunogenicity. This work found …

    duke Repository record for Development of Cartilage-Derived Matrix Scaffolds via Crosslinking, Decellularization, and Ice-Templating (opens in a new tab)

  4. Self-supported polymer monoliths for CO2 capture

    … polymer monoliths for CO2 capture via ice templating and inverse template 3D printing techniques. Three main objectives are addressed – i) understanding the effect of SO2, a model acid gas, on the CO2 capture performance of the self-supported polymer sorbent, ii) incorporating additives …

    gatech Repository record for Self-supported polymer monoliths for CO2 capture (opens in a new tab)

  5. Development of Stochastic and Anisotropic Multiscale Ceramics Using High Aspect Ratio Sacrificial Fillers

    … anisotropic structures via a directional ice-templating technique and hard-templating using the sacrificial filler method. Cellulose nanocrystals (CNCs) aerogels have been created via a ceramic suspension of 100g/mL of CNC powder and deionized water. Samples were then frozen, in …

    vt Repository record for Development of Stochastic and Anisotropic Multiscale Ceramics Using High Aspect Ratio Sacrificial Fillers (opens in a new tab)

  6. Cellulose nanocrystals-based nanomaterials with aligned microstructures for sustainable energy storage technologies

    … market as commonly used energy storage devices, the limited resources of lithium and the soaring costs have greatly restricted their long-lasting applications in the future. <br/>As a cost-effective successor to LIBs, sodium- and potassium-ion batteries (SIBs/PIBs) have aroused wide public …

    bristol Repository record for Cellulose nanocrystals-based nanomaterials with aligned microstructures for sustainable energy storage technologies (opens in a new tab) Download PDF for Cellulose nanocrystals-based nanomaterials with aligned microstructures for sustainable energy storage technologies (opens in a new tab)

  7. Synthesis And Characterization Of Nano-Hybrid Systems With Induced Porosities Via Ice Templation

    … to be tailorable to specific applications. When ice templating (a technique that induces porosity via a sacrificial ice template) is combined with these nano-hybrid systems, a new class of porous materials becomes available that can be imbued with targeted properties as required by the specific …

    cornell Repository record for Synthesis And Characterization Of Nano-Hybrid Systems With Induced Porosities Via Ice Templation (opens in a new tab)

  8. Intrinsic Manipulation of Microstructure and Strength of Ice-Templated Lithium Titanate

    … porous lithium titanate (LTO) materials using ice-templating technique. Ice-templating, a promising fabrication technique for porous ceramics, enables the formation of sintered structures with anisotropic pores that are aligned to improve mechanical stability of materials. The work presented in …

    odu Repository record for Intrinsic Manipulation of Microstructure and Strength of Ice-Templated Lithium Titanate (opens in a new tab)

  9. Exploring How The Carbon-Sulfur Cathode'S Properties In A Lithium-Sulfur Battery System Affect The Cell'S Performance

    … the porous structure to sequester the sulfur. Ice-templating has been shown to successfully synthesize hierarchical porous carbons but their electrical conductivity had not been optimized. In this work, hierarchical porous carbons with improved electrical conductivity were developed by …

    cornell Repository record for Exploring How The Carbon-Sulfur Cathode'S Properties In A Lithium-Sulfur Battery System Affect The Cell'S Performance (opens in a new tab)

  10. Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties

    … in these applications to enhance performance. Ice-templating has emerged as a versatile technique that can synthesize directionally macroporous ceramics with low pore tortuosity. Although the fabrication is relatively straightforward, the challenge is that there are numerous variables …

    odu Repository record for Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties (opens in a new tab)

  11. Off Axis Compressive Response of Ice-Templated Ceramics

    The off-axis compressive behavior of ice-templated ceramic was analyzed using experimental results and micro-mechanical model simulation. Ice-templated ceramics is a versatile processing technique used to manufacture anisotropic ceramic foam by exploiting the anisotropic growth characteristics and …

    odu Repository record for Off Axis Compressive Response of Ice-Templated Ceramics (opens in a new tab)

  12. 3D Freeze Nano Printing for Multiscale, Multifunctional Porous Materials

    … Among them, freeze casting is one that uses ice as template, thus, making it a versatile, low cost and environmentally friendly process. However, conventional freeze casting process can only fabricate porous objects with simple geometries such as cylinder, rectangle, based on the shape of the …

    buffalo Repository record for 3D Freeze Nano Printing for Multiscale, Multifunctional Porous Materials (opens in a new tab)

  13. Preparation and application of cellulose based sensing materials

    … fiber aerogel sensor, which is developed through ice-templating and electrostatic assembly. By controlling temperature, the 2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils (TOCNF) assembles into a 3D sub-micron fiber (SMF) network, achieving elasticity in the aerogel. …

    ubc Repository record for Preparation and application of cellulose based sensing materials (opens in a new tab) Download PDF for Preparation and application of cellulose based sensing materials (opens in a new tab)

  14. Study of Hierarchical Porous Carbons and Its Composites as Fuel Cell Catalyst Supports

    … nm), and micropores (< 2 nm). By modifying the ice-templating method developed previously in the Giannelis group, the size of mesopores with high fidelity could be controlled. HPCs featuring high surface area (> 1000 m2/g) and pore volume (~ 2.3 cm3/g), moderate electrical conductivity (~ 1 …

    cornell Repository record for Study of Hierarchical Porous Carbons and Its Composites as Fuel Cell Catalyst Supports (opens in a new tab)

  15. Structural engineering of transition metal-based electrocatalysts toward nitrate reduction

    … nanosheets were fabricated via an ice-templating bottom-up self-assembly method. Key synthesis parameters, such as nanoparticle size, surface charge and freezing velocity, were systematically investigated. Building upon the same material platform, atomic-level structuring was …

    texas Repository record for Structural engineering of transition metal-based electrocatalysts toward nitrate reduction (opens in a new tab)

  16. Engineering 3D Collagen Tunable Platforms for Mechanobiology Studies

    … and bioactive type I collagen scaffolds via an ice-templating method, and we detail how mechanics, morphology, and protein contents of the scaffolds were tuned to make them suitable for mechanobiology studies. Scaffolds were generated by varying collagen concentration, freezing temperature, and …

    cornell Repository record for Engineering 3D Collagen Tunable Platforms for Mechanobiology Studies (opens in a new tab)

  17. Design and engineering of 3D collagen-fibronectin scaffolds for wound healing applications

    … porous scaffold was originally fabricated using ice templating techniques and then coated with a layer of fibronectin, whose conformation was controlled via incubation temperature and monitored using Fӧrster resonance energy transfer (FRET) spectroscopy. This platform was next utilized to …

    cornell Repository record for Design and engineering of 3D collagen-fibronectin scaffolds for wound healing applications (opens in a new tab)

  18. Substrates for Plasma Sprayed Solid Oxide Cell with Better Longevity and Air Permeability

    … substrates manufactured by pore-former based and ice-templating-based methods, respectively. From the manufacturing perspective, the tape casting method is much simpler and more scalable than the porosity alignment methods, offering further advantages. Adding d0.5=60 µm pore former at 45 vol% in …

    toronto-retro Repository record for Substrates for Plasma Sprayed Solid Oxide Cell with Better Longevity and Air Permeability (opens in a new tab)

  19. A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement

    … For that, freeze casting, also called ice-templating, is technique of solidifying an aqueous ceramic suspension under the effect of unidirectional temperature gradient. In this study, Ice-templated porous specimens of different suspension percent (20 and 30 vol.%) were processed from …

    odu Repository record for A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement (opens in a new tab)

Page 1 of 2