Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 367 for “"Ignition Delay"”.
-
Ignition Delay Times of Natural Gas/Hydrogen Blends at Elevated Pressures
… For reheat gas turbines, understanding of the ignition delay times of high-hydrogen natural gases is important for two reasons. First, if the ignition delay time is too short, autoignition can occur in the mixer before the primary combustor. Second, the flame in the secondary burner is …
-
Ignition delay properties of alternative fuels with Navy-relevant diesel injectors
… Fleet Initiative, this thesis researched the ignition characteristics for diesel replacement fuels used with Navy-relevant fuel injectors. A constant-volume combustion chamber was used to simulate Top-Dead-Center conditions of a diesel engine using an ethylene-air preburn with appropriate …
-
Hot jet ignition delay characterization of methane and hydrogen at elevated temperatures
… study contributes to a better understanding of ignition by hot combustion gases which finds application in internal combustion chambers with pre-chamber ignition as well as in wave rotor engine applications. The experimental apparatus consists of two combustion chambers: a pre chamber that …
-
Ignition Delay of Non-Premixed Methane-Air Mixtures using Conditional Moment Closure (CMC)
Autoignition of non-premixed methane-air mixtures is investigated using first-order Conditional Moment closure (CMC). In CMC, scalar quantities are conditionally averaged with respect to a conserved scalar, usually the mixture fraction. The conditional fluctuations are often of small order, …
-
Traversing hot jet ignition delay of hydrocarbon blends in a constant volume combustor
… as a rapid, distributed and moving source of ignition, traversing across one end of the long combustion chamber entrance, induces complex flow structures such as a train of counter rotating vortices that enhance turbulent mixing. In general, a stationary hot-jet ignition process lack these …
-
Ignition delay study of next generation alternative jet fuels in a rapid compression machine
… primary goal of this study is to determine the ignition delay time of jet fuels of interest; conventional, alternative, and surrogate blends. By measuring the pressure trace of autoignition in rapid compression machine, ignition delay time is captured through the pressure derivative. Category A …
-
Shock-tube Investigation Of Ignition Delay Times Of Blends Of Methane And Ethane With Oxygen
… the transition from methane-dominated ignition kinetics to ethane-dominated kinetics for increasing levels of ethane is also of fundamental interest toward the understanding of hydrocarbon chemical kinetics. Much research has been conducted on the two fuels individually, but …
-
A study of Cool Diffusion Flames utilizing Ignition Delay Characteristics of N-Heptane Autoignition Simulations
… an alternative approach using Cantera autoignition simulations, which presumes isobaric, adiabatic conditions. The fuel, n-heptane, is analyzed through six kinetic mechanisms that capture the spectrum of low and high temperature chemistry. The observed ignition process – manifesting as …
-
Investigation of the Relationship of Ignition Delay Characteristics of a Hydrocarbon Fuel to Carbon Formation
Made available in DSpace on 2014-12-05T19:16:03Z (GMT). No. of bitstreams: 1 6402871.pdf: 1964960 bytes, checksum: 33ed561c2fd678f0e6e178e6eff60e7e (MD5) Previous issue date: 1963
-
Shock Tube and Mid-infrared Laser Absorption Measurements of Ignition Delay Times and Species Time-histories
… assembled, and tested in order to study the ignition as well as thermal decomposition characteristics of two types of fuels: methane (the major natural gas component, which is also a major intermediate during higher order hydrocarbon ignition and pyrolysis) and propanal (an oxygenated …
-
Chemiluminescence and Ignition Delay Time Measurements of C9H20 Oxidation in O2-Ar Behind Reflected Shock Waves
… the physical, chemical, combustion, and ignition properties of multi-component petroleum-based fuels, enabling fundamental studies to be performed in a more controlled manner. Of particular interest are straight-chained, saturated hydrocarbons (n-alkanes) due to the high concentration of …
-
Design and qualification of a high-pressure combustion chamber for ignition delay testing of diesel fuels
… combustion chamber was designed to compare the ignition properties of different fuels, including conventional F76 diesel and hydrotreated renewable diesel (HRD), derived from algae. Conditions were selected to capture the operating conditions within a large number of Navy systems, testing at a …
-
Numerical Modeling Of The Shock Tube Flow Fields Before Andduring Ignition Delay Time Experiments At Practical Conditions
… resources. Combustion modeling focuses on the ignition process behind the reflected shock wave in undiluted and diluted Hydrogen test gas mixtures. Accurate representation of the Shock - tube reactive flow fields is more likely to be achieved by the means of the LES model in conjunction with …
Page 1 of 19