Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 76 for “"Ignition Delay Times"”.
-
Ignition Delay Times of Natural Gas/Hydrogen Blends at Elevated Pressures
… For reheat gas turbines, understanding of the ignition delay times of high-hydrogen natural gases is important for two reasons. First, if the ignition delay time is too short, autoignition can occur in the mixer before the primary combustor. Second, the flame in the secondary burner is …
-
Shock-tube Investigation Of Ignition Delay Times Of Blends Of Methane And Ethane With Oxygen
… the transition from methane-dominated ignition kinetics to ethane-dominated kinetics for increasing levels of ethane is also of fundamental interest toward the understanding of hydrocarbon chemical kinetics. Much research has been conducted on the two fuels individually, but …
-
Shock Tube and Mid-infrared Laser Absorption Measurements of Ignition Delay Times and Species Time-histories
… assembled, and tested in order to study the ignition as well as thermal decomposition characteristics of two types of fuels: methane (the major natural gas component, which is also a major intermediate during higher order hydrocarbon ignition and pyrolysis) and propanal (an oxygenated …
-
Oxidation Kinetics of Pure and Blended Methyl Octanoate/n-Nonane/Methylcyclohexane: Measurements and Modeling of OH*/CH* Chemiluminescence, Ignition Delay Times and Laminar Flame Speeds
… the empirical characterization and modeling of ignition trends of ternary blends of three distinct hydrocarbon classes, namely a methyl ester (C9H18O2), a linear alkane (n-C9H20), and a cycloalkane (MCH). Numerous surrogate biofuel formulations have been proposed in the literature, yet specific …
-
Investigation of Oxy-fuel Combustion Behind Reflected Shockwaves
… fuels. This report presents work on the ignition delay times and several species time-histories of methane, ethylene and syngas over a range of conditions. All experiments were conducted behind reflected shock waves using two different shock tubes. The ignition delay times were measured …
-
Numerical study of autoignition of fuel-air mixtures at elevated temperatures and pressures
In a conventional spark-ignition (SI) engine the fuel-air mixture is injected into the cylinder where it is mixed with the residual gasses and compressed. Under normal operation, combustion takes place at the end of the compression stroke, the mixture is ignited by a spark, flame kernel grows, …
-
Combustion of 1,3-Butadiene behind Reflected Shocks
… spark-assisted homogeneous charge compression ignition and fuel reformate exhaust gas recirculation. In the present work, the ignition delay times of 1,3-butadiene mixtures has been investigated using pressure data. Oxidation of 1,3-butadiene/oxygen mixtures diluted in argon or nitrogen at …
-
Boron Particle Ignition and Combustion in a Shock Tube Using Time -Resolved Spectroscopy
… show a rapid decrease by a factor of four in ignition and burning times as the mole fraction ratio XF/XO2 is increased from 0 to 0.25. For values of XF/XO2 greater than 0.5 there is little change of ignition burning time with XF/XO2 . Spectroscopic data taken in pure oxygen environments show …
-
Auto-ignition characterisation of synthetic fuels via Rapid Compression Machine.
… This work is aiming at characterising the auto-ignition properties of individual fuel components representative of the chemical families present in the synthetic fuels which in this case are toluene, iso-octane, n-heptane, and bio-alcohols; ethanol and n-butanol. The auto-ignition …
-
Ignition delay of oxygenated fuel droplets: development of a 1 second drop tower and initial 1-g test results
… combustion. In the present study, droplet ignition delay times of methyl butyrate and methanol are investigated. A bench experiment, conducted in normal gravity, was constructed and used to determine the ignition delay times of each fuel. Normal gravity experiments were conducted on both …
-
Fundamental studies of solid-fuel combustion using a two-stage flat-flame burner
… processes that occur during coal combustion. Ignition influences many aspects of coal combustion, including flame stability, submicron aerosol evolution, and char burnout. As important as ignition and these associated processes are, they are challenging to study because they depend on many …
-
Advancements in Composite Solid Propellant Testing and Evaluation for Formulations Containing Novel Nano-Additives
… the fuel, oxidizer, and various catalysts. Oftentimes, bonding agents and plasticizers are added to improve the mixture and propellant qualities. The advent of the nano-particle synthesis revolution allows for customized particle synthesis. This dissertation outlines two innovative experiments …
-
Investigation of high-pressure methane and syngas autoignition delay times
… (CH4) and a syngas mixture (H2/CO=95:5) autoignition delay measurements relevant to operating conditions of supercritical carbon dioxide (sCO2) power cycle (100 to 300 bar) combustors. To acquire data at these conditions as part of this thesis, a new high-pressure shock tube is designed, …
-
A High-Pressure Shock Tube Study of Hydrogen and Ammonia Addition to Natural Gas for Reduced Carbon Emissions in Power Generation Gas Turbines
Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. Mixtures were …
-
Autoignition Delay Time Measurements and Chemical Kinetic Modeling of Hydrogen/Ammonia/Natural Gas Mixtures
… to study CO formation profiles as well as the ignition delay times behind reflected shock waves in order to refine chemical kinetic models. Experiments were carried out in the University of Central Florida's shock tube facility by utilizing chemiluminescence to obtain OH* emission and laser …
-
Ignition sensitivity of composite energetic materials to electrostatic discharge
… understanding of their response to electrostatic ignition stimuli. It is important to focus on and minimize characteristics of the reaction that promote sensitivity to ESD while still maintaining high performance in combustion. This body of work investigates the ignition response of energetic …
-
The Effect of 2,5-Norbornadiene on the Ignition of Hydrogen and Methane Behind Reflected Shock Waves
Ignition delay times were measured for stoichiometric H2/O2, CH4/O2, H2/ C7H8/O2, and CH4/C7H8/O2 mixtures highly diluted in argon using the High-Pressure Shock Tube and Aerospace Shock Tube Facilities at Texas A&M University. Reflected-shock temperatures ranged from 1014 to 1459 K in the hydrogen …
-
EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE EFFECTS OF TEST VARIABLES ON AUTO-IGNITION IN A RAPID COMPRESSION MACHINE
Ignition delay measurements are frequently carried out in Rapid Compression Machines (RCMs). When data is compared from different RCM facilities, the ignition delay times are often inconsistent for any particular fuel at a specific compressed condition. The literature has attributed the discrepancy …
-
Autoignition Delay Time Measurements for Natural Gas Fuel Components and their Mixtures
… hydrocarbons in natural gas can severely reduce ignition delay time of methane-based fuels. To increase the database of auto-ignition delay times for methane-based fuel mixtures characteristic of natural gas, experiments to measure auto-ignition delay times have been performed for a variety of …
-
Analysis of diffusion models in high speed reacting flow simulations
… the HSCD code results matched Cantera well. Ignition delay times were compared with experimental results. The ignition delay times were found to be within the error bars of the experimental results. The two modes of ignition, strong and weak, were observed in the simulations. In the …
Page 1 of 4