Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 66 for “"Ignition Energy"”.
-
Partial Inerting and Minimum Ignition Energy (Mie) Prediction of Combustible Dusts
Minimum Ignition Energy (MIE) is a critical dust hazard parameter guiding elimination of ignition sources in solids handling facilities. Partial inerting is an important but underutilized mitigation technique in which MIE of a dust cloud is increased through inerting, reducing the risk of an …
-
The Effects of Increased Ignition Energy on Cold Start Hydrocarbon Emissions
A study on the effects of increased ignition energy on cold start hydrocarbon emissions was conducted. The tests were conducted on a single cylinder ASTM-CFR engine. The engine was outfitted with EFI, exhaust analyzers, and temperature probes. The engine was also modified to produce cold start …
-
Measurement of Dust Cloud Dynamics in a Standard Minimum Ignition Energy Device
Minimum ignition energy is a key parameter in identifying the risk associated with a particulate material. The methods through which this has been tested throughout the years have culminated into devices like the Cesana MIKE3 or the Siwek 20L apparatus. Forming a cloud via a pressurized airburst …
-
Minimum Ignition Energy Prediction for Organic Gases and Liquids using Group Contribution Method
… and kernel ridge regression (KRR) for minimum ignition energy (MIE) prediction of 55 flammable organic gases and liquids. Marrero/Gani (MG) GC method was used to determine structurally dependent parameters (fragment of molecules or group of molecules) that uniquely represent the molecular …
-
Studying The Dust Cloud Minimum Ignition Energy Of Amino Acids And Their FMOC's
… hazard probability on the basis of their minimum ignition energy, the minimum energy an ignition source must supply in order to ignite a dust cloud. Such data is often used in risk assessments and to compare combustible dusts to each other, but there is a lack of data in the literature for minimum …
-
Hybrid Flammable Dust-Gas Cloud Ignition Using a Modified Standard Minimum Ignition Energy Device
… in process industries because of its ease of ignition as well as serious consequences. Ease of ignition is quantified by minimum ignition energy (MIE), which is associated with the probability of ignition for a hybrid mixture. This study aims at improving the MIE measurement of hybrid dust-gas …
-
The Effects of Particle Adhesion on the Experimental Minimum Ignition Energy of Combustible Dusts
… induce severe injuries. The dust cloud minimum ignition energy (MIE) is a safety parameter related to the ignitability of a dust cloud in air. Dust cloud generation in an MIE apparatus often leads to particle adhesion to the Hartmann tube wall and electrodes. The adhered material is then …
-
The Effects of Particle Adhesion on the Experimental Minimum Ignition Energy of Combustible Dusts
… induce severe injuries. The dust cloud minimum ignition energy (MIE) is a safety parameter related to the ignitability of a dust cloud in air. Dust cloud generation in an MIE apparatus often leads to particle adhesion to the Hartmann tube wall and electrodes. The adhered material is then …
-
The Effects of Particle Adhesion on the Experimental Minimum Ignition Energy of Combustible Dusts
… induce severe injuries. The dust cloud minimum ignition energy (MIE) is a safety parameter related to the ignitability of a dust cloud in air. Dust cloud generation in an MIE apparatus often leads to particle adhesion to the Hartmann tube wall and electrodes. The adhered material is then …
-
The Effects of Particle Adhesion on the Experimental Minimum Ignition Energy of Combustible Dusts
… induce severe injuries. The dust cloud minimum ignition energy (MIE) is a safety parameter related to the ignitability of a dust cloud in air. Dust cloud generation in an MIE apparatus often leads to particle adhesion to the Hartmann tube wall and electrodes. The adhered material is then …
-
NO<sub>x</sub> reduction for natural gas engines with increased ignition energy and plasma jet ignitors
… specific fuel consumption were calculated. The energy for the ignitors was provided by a variable high energy ignition system, and each ignitor was supplied with 0.00, 0.08, 0.32, 0.72 and 1.28 Joules of energy in addition to that provided by the standard ignition coil. To differentiate between …
-
Advanced Optical Diagnostics for Dust Cloud Particle, Flow, and Combustion Measurements in a Minimum Ignition Energy Testing Device
… methods and equipment like the MIKE3 minimum ignition energy (MIE) testing device. The MIKE3 device, while important for safety testing, is also appealing for the scientific investigation of dust cloud ignitability. Dust explosion conditions in the MIKE3 device can be easily controlled, and …
-
Influence of ignition energy, ignition location, and stoichiometry on the deflagration-to-detonation distance in a Pulse Detonation Engine
… a detonation wave. This thesis explores various ignition conditions which minimize the deflagration-to- detonation transition distance (Xddt) of a single detonation wave in a gaseous mixture.
-
Studying the Effect of Particle Morphology and Density on Dust Cloud Dynamics in Minimum Ignition Energy (MIE) Device by Digital Inline Holography (DIH) Technique
Dust explosions can cause the most serious and widespread of explosion hazard which can have irreversible impacts on properties, environment, and lives. Thus it becomes imperative to understand dust explosions is a much detailed and lucid way. Several studies have been done in the past focusing on …
-
Effects of Pressure and Equivalence Ratio on Minimum Ignition Energies of Methane-Air Mixtures and Effect of Pressure on Breakdown Threshold Energies of Methane and Air
… of pressure and equivalence ratios on minimum ignition energies of methane-air mixtures are also investigated. The pressures for the breakdown threshold energy experiments are varied from 0.02 to 1.17 MPa, and pressures and equivalence ratios for minimum ignition energy experiments are varied …
-
Study of Dust - Gas Hybrid Mixture Explosions
… This work also studied the effect of varying the ignition energy and turbulence intensity to the proposed formula. For ignition energy effect, results from methane/niacin mixture demonstrated that the MEC and LFL will not be affected by changing ignition energy. There is no distinguishable …
-
Flammability and Combustion Behaviors in Aerosols Formed by Industrial Heat Transfer Fluids Produced by the Electrospray Method
… in the system are studied in the aerosol ignition tests. Flames in aerosols are characterized by non-uniform shapes and discrete flame fronts. Flames were observed in different burning modes. Droplet evaporation was found to play an important role in aerosol burning modes. Droplet …
-
Examining correlations of electrostatic discharge sensitivity and electrical conductivity of composite energetic materials
… the composite’s electrical conductivity and ignition sensitivity was examined. The composites consisted of micrometer particle aluminum combined with another metal, metal oxide, or fluoropolymer. Of the nine tested mixtures, aluminum and copper oxide was the only mixture to ignite by …
-
Impact of Spark Ignition Duration, Energy and Phasing on Combustion and Performance in a Gasoline Turbocharged Direct Injection Engine near the Dilute Limit
… technology to continue improving gasoline spark-ignition (SI) engine fuel conversion efficiency and for the reduction of nitrogen oxide emissions. Dilution is principally limited in SI engines by ignition, flame kernel development, successful transition to the turbulent propagating flame during …
Page 1 of 4