Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Ignition behavior"”.
-
Study of alternative jet fuel ignition behavior in gas turbine combustion environments
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2025-05-01
-
Pyrolysis and ignition behavior of coal, cattle biomass, and coal/cattle biomass blends
… includes fuel property analysis, pyrolysis and ignition behavior characteristics, combustion modeling, emissions modeling, small scale combustion experiments, pilot scale commercial combustion experiments, and cost analysis of the fuel usage for both feedlot biomass and dairy biomass. This paper …
-
Mesoscale computational prediction and quantification of thermomechanical ignition behavior of polymer-bonded explosives (PBXs)
… frictional heating. A novel criterion for the ignition of heterogeneous energetic materials under impact loading is developed, which is used to quantify the critical impact velocity, critical time to ignition, and critical input work at ignition for non-shock conditions as functions of …
-
Ignition behavior and air delivery requirements observed during the carbonization of pressurized packed beds of biomass
… of this thesis. Specifically, the subjects of ignition behavior and air delivery are explored in detail. In lab-scale tests of the FC process, some fuel have been observed to ignite violently, resulting in a sudden drastic pressure rise (ΔP~1 MPa within 2-3 seconds). Because this event could be …
-
Ignition behavior of diesel and lubricant oil droplets in hydrogen-containing mixtures: rapid compression machine experiments and comparison to natural gas baselines
… carbon-free fuel, its exceptionally low minimum ignition energy, high diffusivity, and rapid chemical kinetics introduce major combustion-control challenges, including increased susceptibility to pre-ignition, knock, and uncontrolled flame propagation. Recent studies have identified lubricant oil …
-
Towards LOX and Methane Propulsion Systems: Shock Tube Combustion Studies of Various Fuel Mixtures at Relevant Chamber Conditions.
… The current study seeks to understand the ignition behavior of methane (with and without CO2 dilution) and NG surrogate mixtures, including CH4/C2H6/C3H8 and CH4/C2H6/C3H8/i-C4H10/n-C4H10, using a high-pressure shock tube facility at reflected shock conditions relevant to advanced rocket …
-
An experimental investigation of heaterless hollow cathode ignition
… life-limiting cathode erosion could occur during ignition. These concerns have resulted in a lack of confidence that heaterless hollow cathode technology can endure the rigors of spaceflight qualification. In this research, heaterless hollow cathode ignition behavior was characterized. In doing …
-
Evaluation of hot surface ignition device performance with high-pressure kerosene fuel sprays
… feasible propulsion systems, compression ignition (CI) engines present many advantages for light-duty vehicle operation. In particular, CI engines remain an optimal choice for unmanned aerial vehicles (UAVs) designed to operate at moderate flight speeds. However, one of the primary …
-
Autoignition study of next generation aviation fuels and components
… hydrocarbon components by investigating their ignition delay times at various autoignition conditions. Complex multistage ignition behavior of fuels at specific conditions are further evaluated with rapid compression machine (RCM) experimental results and CHEMKIN chemical mechanism simulations. …
-
Advanced rapid compression machine test methods and surrogate fuel modeling for bio-derived jet and diesel fuel autoignition
… designed and built for investigating the autoignition characteristics of bio-derived jet and diesel fuels. The RCM has been designed with a particular emphasis on versatility, so that non-volatile fuels may be tested in a premixed gas phase, as a fuel spray, or as an aerosol in an oxidizing …
-
Small Engine Flash Vapor JP-8 Fuel Injector Testing, Simulation and Development
… tenth of a second at the required flow rate. An ignition test rig was built to compare ignition behavior between AVGAS and heated JP-8. Test result showed that the 550F pre-heated JP-8 had equal or superior ignition pressure rise / ignition delay time than AVGAS.
-
Design and Development of a Resonance Ignition System Using Gaseous Propellants
… with premixed gaseous propellants. Resonance ignition is a non-electrical ignition concept in which an underexpanded jet impinges on a closed-end Hartmann–Sprenger tube (HST), generating cyclic compression and expansion waves that rapidly heat gas near the tube endwall. A modular experimental …
-
Investigation on Ammonium Perchlorate Based Electrically Controlled Propellants
An experimental study exploring the ignition behavior of an electrically controlled gel monopropellant (ECGP) composed of an ionically conducting liquid polymer (polyethylene glycol) and ammonium perchlorate (AP) was conducted. Complexation of AP with PEG enabled ion transport when a voltage was …
-
Mesoscale Computational Analysis on the Reactivity of Heterogeneous Energetic Materials with Electromechanical Properties
… the other types of excitation leading to ignition. Electromechanically induced dissipation is one notable example of such mechanisms that have become increasingly vital to understand in the recent development of a novel, multifunctional stimulus capable of sensitizing and triggering …
-
A Numerical Study of the Multi-Component Effects on the Combustion and Evaporation of Biofuels and Blends
… that the evaporation of the fuel affects the ignition behavior and combustion quality. Therefore, a thorough understanding of the evaporation and mixing processes is essential for further improvement in engine performance. A multi-component droplet evaporation model, as efficient as a …
-
Development and Modelling of a Low Current LaB₆ Heaterless Hollow Cathode
… circuit. A discussion of emitter poisoning and ignition behavior is presented. The cathode is characterized by measuring anode and keeper voltages as a function of anode current and propellant flow rate, with the cathode discharging directly to a flat metal anode. Results are consistent with …
-
LOW TEMPERATURE SPLIT INJECTION SPRAY COMBUSTION: IGNITION, FLAME STABILIZATION AND SOOT FORMATION CHARACTERISTICS IN DIESEL ENGINE CONDITIONS
… the fundamental differences in combustion behavior when split injections are used in low temperature combustion regime. In this thesis, the first injection is also called as pilot injection and second injection is also called as main injection. The broad aspects which are studied …
-
The Role of Live Conifer Fuels in Crown Fires Spread
… been controversial in the past decades. Although ignition and spread statistical data for live and dead fuels exist in the literature, a clear understanding of the fundamental difference in the burning behavior is missing. To illuminate the role of live fuel on forest fire spreading, a laboratory …
-
Fundamental Experimental Tests and Modeling of LOx/CH4 Engines at High Pressures
… applications. Therefore, new experimental ignition delay time measurements at rocket engine relevant pressures are essential to ensure current chemical kinetic models capture the ignition behavior at these elevated conditions and to determine the optimal purity levels for a reliable, …
Page 1 of 3