Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 77 for “"Im7"”.
-
Fatigue Microcracking of Composite Material IM7/977-2
… experiments in fatigue were run on IM7/977-2 cross-ply laminates. Using a modified Paris Law approach, microcracking fatigue data is presented over a wide range of applied cyclic stresses. This Paris Law plot shows an "A" value of 6.40x10-25 and a "B" value of 8.07 and provides a …
-
A Study of the Thermal Properties of PETI-5/IM7
PETI-5 (Phenylethynyl-terminated polyimide) is a substance that shows a great deal of potential in the high-speed aircraft and the aerospace industry. PETI-5 has been used for the High Speed Civil Transport (HSCT), a supersonic passenger aircraft in development at NASA. In this project, four …
-
Tensile and Compressive Mechanical Behavior of IM7/PETI-5 at Cryogenic Temperatures
… test variables. The material used in the study, (IM7/PETI-5), is an advanced carbon fiber, thermoplastic polyimide composite.
-
Comprehensive Investigation of Quasibrittle Fracture of IM7/977-3 Laminates via Size Effect Analysis
… the non-linear size effect of fracture of IM7/977-3 laminates with different sizes in multiple modes including the matrix-dominated Mode I intralaminar fracture, the fiber-dominated Mode I intralaminar fracture, the Mode I interlaminar fracture, and the Mode II interlaminar fracture.The …
-
DETERMINATION OF A HIGHER-ORDER ELASTIC CONSTANT OF A SINGLE FILAMENT OF HEXTOW IM7-12K CARBON FIBER USING FINITE DEFORMATIONS
… the elastic properties of single filaments of IM7 carbon fibers, which include the usual second-order as well as the third-order elastic constants, and the piezoresistivity will be presented.
-
Investigation of Microcracking and Damage Propagation in Cross-Ply Composite Laminates
… microcracking and damage progression in IM7/977-2, IM7/5555, and IM7/5276-1 [0/90/90/0] laminates. For each material system, seven to eight small coupons were axially loaded in a tensile substage. At increments of around 50 MPa the surfaces of the specimens were inspected via optical …
-
The improvement of the hygrothermal and mechanical properties of bismaleimide and K3B/IM7 carbon fiber composites through a systematic study of the interphase
Thesis (Ph. D.)--Michigan State University. Department of Materials Science and Mechanics, 1997
-
Characterization of electrical conductivity of carbon fiber/epoxy composites with conductive AFM and scanning microwave impedance microscopy
… investigates the electrical conductivity of IM7 carbon fibers using two Atomic Force Microscope (AFM) –based techniques: Conductive AFM (C-AFM) and Scanning Microwave Impedance Microscopy (sMIM). Unidirectional IM7/977-3 carbon fiber/epoxy laminates were manufactured and examined with these …
-
Development of a New Affinity Membrane for Rapidly Purifying Non-antibody Proteins
… proteins. The affinity membrane utilizes Im7/CL7 coupling technology developed by Dr. Vassylyev's lab at the University of Alabama Birmingham (UAB), licensed by TriAltus Bioscience. The behavior of the membrane was evaluated using purified CL7-tagged Cas9 as my model protein for static and …
-
Microcracking Fracture Toughness for Graphite Epoxy Composite Laminates Using Finite Fracture Mechanics
… of specific interest in the aerospace industry – IM7/977-2, IM7/5555 and IM7/5276-1 – were analyzed. To evaluate the microcracking fracture toughness, displacement controlled static tensile tests were performed. Microcrack density (the number of microcracks per unit length) was measured as a …
-
Investigation of Microcrack Growth in [0/90]s Graphite Epoxy Composite Laminates Using X-Ray Microtomography
… in cryogenic application. Composite materials IM7/977-2, IM7/5555 and IM7/5276-1 are of interest for the aerospace industry and this research concentrates on study of microcracking, delamination and other defects in the [0/90]s composite laminates of the above materials. These materials were …
-
Detection of transverse cracking in a hybrid composite laminate using acoustic emission
… cross-ply hybrid laminate containing 0◦ IM7/8552 carbon/epoxy and a very thin 90◦ S2/8552 glass/epoxy layer is studied using the acoustic emission (AE) technique. By conducting modal-based AE experiments and analysis, we investigate some parameters that can be used as the waveform …
-
Mechanical Properties and Durability of a Composite Material at Cryogenic Temperatures
… have been examined. The tensile properties of IM7/977-2 were evaluated as a function of test temperature and thermal-mechanical load history. The temperature dependent coefficient of thermal expansion (CTE) of unidirectional specimens of the same material was measured between -200°C and 0°C. …
-
Influence of Anti-CD44 on Murine B Cell Activation
… was explored using the anti-CD44 mAbs RK3G9 and IM7. Immobilized RK3G9 and IM7 could strongly inhibit B cell proliferation and Ig production, with IgE inhibition being prominent. Soluble anti-CD44 had no effect. The inhibitory effect of RK3G9 was not influenced by addition of anti-FCγRII, …
-
Finite element-based failure models for carbon/epoxy tape composites
… interlaminar shear stress-strain relations for IM7/8552 carbon/epoxy tape in ABAQUS finite element models and validate structural delamination failure predictions with tests. Test data for composite configurations with wavy fibers confirm that nonlinear interlaminar shear stress-strain response …
-
Assessment of residual composite properties as influenced by thermal mechanical aging
… fiber-reinforced polyimide material systems, IM7/K3B and IM7/PETI-5, were thermally aged at 163°C for up to 3000 hours under a static compressive load. The future goal of this study is to determine the effect of 10,000 hours (currently underway) and possibly seven years of aging on these …
-
A Comprehensive Data Set of CFRP Impact Damage Accumulation Through a Novel Impact Experimental Setup
… to examine the in-plane strain response of IM7/8552-1 carbon fiber/epoxy composite specimens under the CFCF plate condition. The pendulum itself covers an impact energy range similar to the Charpy and Izod low-velocity impact testing setup, yet allow the pendulum to be applied to extended …
-
Solvent induced microcracking in high performance polymeric composites
… iodine dye penetrant. The material systems were IM7/LaRC™-IAX, IM7/LaRC™-IAX2, and IM7/LaRC™-8515. Specimens from each material system were subjected to one of three immersion tests. The first immersion test involved soaking composite specimens previously prepared with different polishing …
-
Antibody Targeting of Non Ionic Surfactant Vesicles to Vascular Inflammation
… with directed with an anti-CD44 antibody, IM7, conjugated to a non ionic surfactant vesicle (niosome) drug carrier. The IM7 conjugated immunoniosome has been shown to bind to endothelial and synovial lining cells in vitro. The preliminary research is involved with the development of the …
Page 1 of 4