Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 341 for “"Impact Loading"”.
-
Impact loading of timber beams
Static tests as well as impact tests were performed to build up our knowledge about impact loading of timber beams. The investigation was focused on failure modes and failure stresses. The static tests were conducted using both deformation and load controlled regimes at three different loading …
-
Portal frame under impact loading
… increase in the yield point due to the dynamic loading. The resistance the models develop, however, is less than that which the results of high strain rate tests would indicate.
-
Behaviour of bioceramics under impact loading
… it is prudent to perform preliminary static and impact tests on simpler model materials which mimic, in at least one aspect, the behaviour of bone. To bracket this behaviour, for which very little relevant data is available, experiments were therefore done on the two extreme cases, ie brittle …
-
Response of yarn systems to impact loading
… split Hopkinson bar method and the transverse impact method, to obtain the dynamic mechanical response of Spectra 900 yarn and Spectra Shield flexible laminated composite. The responses obtained enable the establishment of accurate rate-dependent, viscoelastic constitutive models for these …
-
Dynamic buckling of plates under impact loading
… in plates when subjected to high rates of loading in the axial direction. The type of instability examined occurs in metals when the strains are well beyond the elastic range. For this reason the metals are assumed to be governed by the equations of a rigid plastic material. In particular, …
-
Low energy impact loading of graphite-epoxy plates.
… theoretical analysis was performed on low energy impact loading of thin (.040 inches) graphite-epoxy plates. Six-inch square plates were subjected to dynamic impact (below the ballistic range) and static loading. The plate static strain energy and dynamic impact energy for failure were equal and …
-
Resistance of concrete railroad ties to impact loading
… in service for only a few months, because of impact loading. The dynamic properties of concrete ties were thus studied in this work. Two typical types of impulse encountered in track, due to rail abnormalities and "wheel flats" of trains, were successfully simulated by the use of a 578 kg …
-
Constitutive modelling of composite materials under impact loading
… of UD composite material behaviour under impact loading. Impact induced loading usually results in three dimensional stress states which significantly influences the failure behaviour. The heterogeneous nature of composite materials, in particular, results in a complex failure behaviour …
-
Bond behavior of reinforced concrete under impact loading
… behavior of reinforced concrete specimen under impact loading. A computer assisted data acquisition system was selected for data acquisition and control. This entire electronic system involved mainly a multichannel digital oscilloscope and an IBM-AT micro computer. All specimens were tested by a …
-
Experimental study of impact loading on negative stiffness structures
… and the use of the apparatus to perform impact tests on negative stiffness honeycomb structures. Negative stiffness beams are non-linear spring elements that can be used to absorb energy. When prefabricated negative stiffness beams are arranged together in a periodic pattern they create …
-
The effects of impact loading on reinforced concrete panels
An investigation into the effects of impact loading on reinforced concrete panels (slabs) was conducted. The impact load was generated by means of a compound pendulum. The impact load was increased by increasing the height from which the pendulum was released as well as by the addition of weights …
-
Specialized fiber reinforced concretes under static and impact loading
… this technique has only been applied for static loading, and none of the previous studies have addressed the effect of high loading rates on the performance of these round panels. A unique test setup was developed in this work to determine the behaviour of round panels under impact loading. The …
-
Bond between reinforcing bars and concrete under impact loading
… bond between reinforcing bars and concrete under impact loading was studied for plain, polypropylene fibre reinforced, and steel fibre reinforced concretes. The experimental program included setting up an impact test system, in which an impact load with considerable energy could be generated, and …
-
Characterization of electronic board material properties under impact loaDing
… to severe ballistic shocks and vibrations. Impact and shock to such products can cause significant functional and physical damage. Safeguarding on-board electronic sensors from such transient shocks due to ballistic impact is of concern. While several studies document material …
-
Impact loading and functional tissue engineering of articular cartilage
… to a single, non-surface disrupting 1.1 J (Low) impact experiences sufficient degeneration over 4 weeks to become functionally equivalent to tissue subjected to a single, surface disrupting 2.8 J (High) impact. By 24 hrs post High impact, cell death and sulfated glycosaminoglycan (sGAG) release …
-
Deformation and fracture of concrete under uniaxial impact loading
… numerical analysis of the bar-geometry axial-impact loading. The critical normal fracture strain energy U and mechanical energy W criteria are proposed for the spatial and time dependence explanation of spallation in concrete. The energy criteria are special cases of a more generalized …
-
Colles’ fracture creation on cadaveric arms by impact loading.
… In this study, we focused our efforts on the impact loading of forearm cadavera in an attempt to recreate, as best as possible, the physiologic events of a forward fall onto an outstretched hand. Fluoroscopic data was taken prior to testing to dimension the cortical bone of the radius, and …
-
Response of Reinforced Concrete Columns Subjected to Impact Loading
… but are vulnerable to transverse out-of-plane loadings, such as those arising from impacts or explosions. To address a lack of understanding regarding blast and impact response of RC members and the need for retrofit techniques to address deficiencies in existing structures, a …
-
Dynamic response of soldered electronic components under impact loading
… of this research was to analyze the effects of impact loading on electronic component failure. A standard fiberglass composite printed circuit board (PCB) card was used in two impact tests. The first test consisted of a PCB card with four adhered strain gauges, which were mounted inside an …
Page 1 of 18