Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 241 for “"Impact strength"”.

  1. A Study of the Effect of Heat Treatment on 3D Printed PLA Impact Strength

    … such as temperature and humidity have a major impact on mechanical properties of materials such as compressive strength, tensile strength, bending strength and impact strength. The purpose of this research is to study how temperature and humidity affect the impact strength of 3D printed PLA …

    sdstate Repository record for A Study of the Effect of Heat Treatment on 3D Printed PLA Impact Strength (opens in a new tab)

  2. A comparison of the fracture toughness, hardness, impact strength, and thermal expansion of two dental porcelains

    … undertaken to obtain a porcelain of optimum strength. A recent development in this field is the new porcelain Optec HSP.</p><p>In this comparative study, a series of mechanical test were performed on both Optec HSP and Ceramco II.</p><p>An indentation technique was used to calculate the …

    njit Repository record for A comparison of the fracture toughness, hardness, impact strength, and thermal expansion of two dental porcelains (opens in a new tab)

  3. EFFECT OF GEOMETRY, CELL SIZE, AND CARBON FIBER REINFORCEMENT ON THE CHARPY IMPACT STRENGTH OF ADDITIVELY MANUFACTURED TPMS LATTICE STRUCTURES

    … structures, with limited attention given to the impact performance of composite- reinforced TPMS structures. The purpose of this study is to determine the effects of geometric configuration (i.e., Schwarz-P, Schwarz-D, and Gyroid), cell size, and carbon fibre composite reinforcement on the impact …

    rit Repository record for EFFECT OF GEOMETRY, CELL SIZE, AND CARBON FIBER REINFORCEMENT ON THE CHARPY IMPACT STRENGTH OF ADDITIVELY MANUFACTURED TPMS LATTICE STRUCTURES (opens in a new tab)

  4. Comparing Material Impact Strength of Three High Impact Plastic Resins Used In Automotive Grille Using Nonlinear Finite Element Analysis Tools

    … In this study an effort has been made to compare impact properties of three different plastic resins used in car grilles. The plastic resins being compared are a proprietary grade PC+ABS, an alternate commercial grade PC +ABS and a commercial grade ABS. The results from this study will be used to …

    gvsu Repository record for Comparing Material Impact Strength of Three High Impact Plastic Resins Used In Automotive Grille Using Nonlinear Finite Element Analysis Tools (opens in a new tab)

  5. Rotational Molding of Acrylonitrile-Butadiene-Styrene Polymers and Blends

    … namely discoloration, bridging, and poor impact strength. It is believed that these effects are due to degradation of the carbon-carbon double bond in the butadiene, through attack by either oxygen or heat. Previous efforts have shown some success in addressing these issues. However, …

    byu Repository record for Rotational Molding of Acrylonitrile-Butadiene-Styrene Polymers and Blends (opens in a new tab) Download PDF for Rotational Molding of Acrylonitrile-Butadiene-Styrene Polymers and Blends (opens in a new tab)

  6. Effects of Temperature and Humidity on Glass-Reinforced Nylon Rotating Bands

    … whether storage environments compromise the strength and integrity of the glass-reinforced nylon rotating bands by researching the environmental factors that will degrade nylon and by performing tests to investigate if these factors will embrittle nylon composites. Moisture and temperature …

    utahstate Repository record for Effects of Temperature and Humidity on Glass-Reinforced Nylon Rotating Bands (opens in a new tab)

  7. Συγκριτική μελέτη μηχανικών ιδιοτήτων σύνθετων ρητινών και τεχνικών ελέγχου τους

    … investigated were Flexural Modulus and strength (three point bending), Brinell hardness, Impact strength, and mode Ι and mode II Fracture Toughness employing SENB and Brazilian tests. Fractographic analysis was carried out in an SEM to determine the origin of fracture for specimens …

    greece Repository record for Συγκριτική μελέτη μηχανικών ιδιοτήτων σύνθετων ρητινών και τεχνικών ελέγχου τους (opens in a new tab)

  8. Improving Impact Properties of Novatein through Polymer Blending and Reactive Extrusion

    … thermoplastic made from protein and requires impact strength modification before it can be used in a wider variety of applications, such as in the agricultural, horticultural and meat processing industries. Polymer blending is often used for improving material properties cost effectively. This …

    waikato-masters Repository record for Improving Impact Properties of Novatein through Polymer Blending and Reactive Extrusion (opens in a new tab) Download file for Improving Impact Properties of Novatein through Polymer Blending and Reactive Extrusion (opens in a new tab)

  9. POLY(LACTIC ACID)-NANOCELLULOSE COMPOSITES: PREPARATION, PROPERTIES AND TOUGHENING MECHANISMS

    … it’s limited in applications where ductility and impact strength are decisive factors in material selection. Therefore, this work aimed at development of tough PLA-based biodegradable composites by incorporating various modified nanocellulose into PLLA matrix via solution cast-injection molding …

    nus Repository record for POLY(LACTIC ACID)-NANOCELLULOSE COMPOSITES: PREPARATION, PROPERTIES AND TOUGHENING MECHANISMS (opens in a new tab) Download file for POLY(LACTIC ACID)-NANOCELLULOSE COMPOSITES: PREPARATION, PROPERTIES AND TOUGHENING MECHANISMS (opens in a new tab)

  10. Natural fibre-reinforced polyolefin-matrix composites

    … tensile and flexural moduli as well as higher impact strength. However there was no significant improvement in either the tensile strength or the flexural strength. The polypropylene composites were stiffer and stronger than the polyethylene composites but the impact strength was substantially …

    unsw Repository record for Natural fibre-reinforced polyolefin-matrix composites (opens in a new tab)

  11. Structure-property characterisation of ternary phase polypropylene composites

    … While the mechanical tests included tensile and impact measurements at ambient temperature, and a fracture toughness test based on the J-integral method carried out at -20 oC. EPR and glass beads were found to influence the structure and properties of polypropylene in different ways. …

    brunel Repository record for Structure-property characterisation of ternary phase polypropylene composites (opens in a new tab)

  12. Ballistic Impact Response of a High Entropy Alloy

    The dynamic impact response and ballistic performance of additively manufactured AlCrFeCoNi high entropy alloy (HEA) were investigated. The dynamic impact strength, energy absorbing capacity, and ballistic velocity limit (V50) of the alloy were determined. The HEA was produced using the directed …

    sask Repository record for Ballistic Impact Response of a High Entropy Alloy (opens in a new tab)

  13. Characterization of impact modified, biaxially oriented poly (vinyl chloride) films

    … of an additional parameter of incorporating impact modifier into the system was also studied.</p> <p>To produce a wide variety of testing conditions, PVC bottle formulations were stretched with a Long Extensional Tester. Selected parameters could be more easily controlled and manipulated by …

    ut-knoxville Repository record for Characterization of impact modified, biaxially oriented poly (vinyl chloride) films (opens in a new tab)

  14. Glass reinforcement of recycled polycarbonate

    … (ABS). It is shown that impact strength and elongation-to-break in a tensile test are the two mechanical properties that are most sensitive to the presence of impurities in PC. On adding short glass fibers, these two properties become almost insensitive to changes in …

    wvu Repository record for Glass reinforcement of recycled polycarbonate (opens in a new tab)

  15. Fracture mechanics and statistical modeling of ternary blends of polylactide/ethylene-acrylate copolymer /wood-flour composites

    … acid) (PLA) with a biodegradable rubbery impact modifier to develop biodegradable and cost effective PLA/wood-flour composites with improved impact strength, toughness, high ductility, and flexibility. Semicrystalline and amorphous PLA grades were impact modified by melt blending with an …

    msu Repository record for Fracture mechanics and statistical modeling of ternary blends of polylactide/ethylene-acrylate copolymer /wood-flour composites (opens in a new tab)

  16. The influence of rubber composition on the polymerization and performance characteristics of high-impact polystyrene

    … of the bulk polymers such as modulus, yield strength and elongation to break were comparable to those of commercial impact polystyrenes. The impact strength of the SBR modified polymers was about three to four times higher than conventional HIPs. The impact properties were sensitive to rubber …

    ut-knoxville Repository record for The influence of rubber composition on the polymerization and performance characteristics of high-impact polystyrene (opens in a new tab)

  17. Impact Behaviour of Hybrid Long Fibre Thermoplastic Composites

    Impact strength is a critical property of composites in the auto industry by way of product service life, safety, and liability. The aim of this project is to arrive at a hybrid biocomposites of hemp-glass fibre-PP with high toughness. Long glass fibres are believed to increase impact strength of …

    toronto-retro Repository record for Impact Behaviour of Hybrid Long Fibre Thermoplastic Composites (opens in a new tab)

  18. Polymerization-structure-property relationships for rubber modified polystyrenes

    … obtained from uniaxial tension experiments. Izod impact tests were carried out. Rubber morphology was characterized by Transmission Electron Microscope techniques.</p><p>It was found that impact improvement is minimal until the molecular weight of the polystyrene matrix reaches about 220,000, Mv. …

    ut-knoxville Repository record for Polymerization-structure-property relationships for rubber modified polystyrenes (opens in a new tab)

  19. Processing a Nickel Nanostrand and Nickel Coated Carbon Fiber Filled Conductive Polyethylene by Injection Molding

    … again for conductivity as well as tensile and impact strength and compared to each other and the non-injection molded samples. It was found that mixing NiNS into the polymer in addition to NCF created a more conductive part than with NCF alone, in a couple orders of magnitude. Also, the shorter …

    byu Repository record for Processing a Nickel Nanostrand and Nickel Coated Carbon Fiber Filled Conductive Polyethylene by Injection Molding (opens in a new tab) Download PDF for Processing a Nickel Nanostrand and Nickel Coated Carbon Fiber Filled Conductive Polyethylene by Injection Molding (opens in a new tab)

Page 1 of 13