Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Impact tester"”.

  1. Design, fabrication, and calibration of an instrumented drop weight impact tester

    … and calibration of an instrumented drop weight impact tester is described. Included in this description are all the sketches and drawings that are needed to duplicate this project, if so desired. This impact tester was built for around $23,000 less than it would have cost to buy and modify a …

    vt Repository record for Design, fabrication, and calibration of an instrumented drop weight impact tester (opens in a new tab)

  2. Development of A Micro-Scale Impact Tester for Characterizing Dynamic Properties of Biological Structural Materials

    … and construction of a micro-scale, air powered, impact testing device for use in Virginia Tech's Biological and Bio-inspired Materials Laboratory. A brief overview of current projectile impact testers is presented along with motivation for the fabrication of a new testing system capable of firing …

    vt Repository record for Development of A Micro-Scale Impact Tester for Characterizing Dynamic Properties of Biological Structural Materials (opens in a new tab)

  3. Characterisation and prediction of particle attrition in lean phase pneumatic conveyors: the influence of particle concentration

    … - A ‘centrifugal accelerator style’ particle impact tester; for characterisation of particle attrition behaviour under closely controlled impact velocities and angles. - A pilot scale vacuum pressure pneumatic conveying system containing a single bend; to study the influence of geometric and …

    greenwich Download PDF for Characterisation and prediction of particle attrition in lean phase pneumatic conveyors: the influence of particle concentration (opens in a new tab)

  4. Characterizing the Performance of Bedding Materials for Dairy Cows Using Cyclic Impact Tests

    … performance of each material. We developed an impact tester that simulates the force of a cow standing or kneeling to characterize different materials. We tested Miscanthus, sawdust, switchgrass, and wheat straw at three different depths to characterize the relative change in density and force …

    guelph Repository record for Characterizing the Performance of Bedding Materials for Dairy Cows Using Cyclic Impact Tests (opens in a new tab)

  5. Dynamic Mechanical and Failure Properties of Solder Joints

    … in BGA packages under quasi-static and dynamic/impact loading. Appropriate methodologies for preparation and testing of single solder joint specimens under quasi-static and dynamic loading were established. Especially, a miniature impact tester was proposed and validated for dynamic testing of …

    nus Repository record for Dynamic Mechanical and Failure Properties of Solder Joints (opens in a new tab) Download file for Dynamic Mechanical and Failure Properties of Solder Joints (opens in a new tab)

  6. The Chemical and Mechanical Properties of Thiol Modified ABS

    … technique (Rheovibron), falling weight impact tester and infra-red spectrometry to measure mechanical and chemical changes occurring in the polymer. Linear correlations were obtained between the loss of unsaturation in the polybutadiene segment of the polymer and loss of impact …

    aston Repository record for The Chemical and Mechanical Properties of Thiol Modified ABS (opens in a new tab) Download PDF for The Chemical and Mechanical Properties of Thiol Modified ABS (opens in a new tab)

  7. TESTING AND MODELING HIGH STRAIN RATE FAILURE IN COMPOSITE MATERIALS

    … High strain rate testing utilized a Charpy impact tester, and slow strain rate testing used a standard tensile tester. Experimental data revealed a rate-dependent failure strain in the composite matrix material and a rate-invariant failure strain in the carbon fiber. Material property data …

    nps Repository record for TESTING AND MODELING HIGH STRAIN RATE FAILURE IN COMPOSITE MATERIALS (opens in a new tab)

  8. Phase separation behavior in a rubber-toughened epoxy system

    … (OM) and scanning electron microscopy (SEM). The impact strength of the seven component samples was measured using an Izod impact tester. Particles were not seen in OM for the first two series and only one rubber concentration value in the second two. SEM on etched samples confirmed the presence …

    ut-knoxville Repository record for Phase separation behavior in a rubber-toughened epoxy system (opens in a new tab)

  9. Effects of Temperature and Humidity on Glass-Reinforced Nylon Rotating Bands

    … Absorbed moisture is found to increase the impact strength of nylon while at the same time expanding surface defects and attacking fiber/matrix bonds. Two impact tests using a Tinius Olsen impact tester are used to determine the effects of different storage environments on the impact …

    utahstate Repository record for Effects of Temperature and Humidity on Glass-Reinforced Nylon Rotating Bands (opens in a new tab)

  10. Low Velocity Impact Behaviour of Unreinforced Bi-layer Plastic Laminates

    Low velocity impact behaviour of bi-layered laminates of acrylic and polycarbonate was investigated using a combination of drop tower impact experiments and explicit finite element analysis in LS-DYNA. Material characterisation tests were conducted in tension and in compression to obtain material …

    unsw Repository record for Low Velocity Impact Behaviour of Unreinforced Bi-layer Plastic Laminates (opens in a new tab)

  11. Examining Methodologies to Assess Abrasion in Tree Crowns

    … which species’ buds are abraded or broken upon impact with adjoining crowns affecting crown growth. Analysis of branch elongation, apical bud toughness and tree sway were investigated in this study. Branch elongation was measured on crowns where growth was inhibited by crowns of adjacent trees …

    ut-knoxville Repository record for Examining Methodologies to Assess Abrasion in Tree Crowns (opens in a new tab)

  12. Elucidating Critical Factors for Practical Dry Cleaning Applications on Low-Moisture Food Contact Surfaces

    … (charged and uncharged), and relative humidity impact the force required to remove the powder from an electropolished 304 stainless steel coupon (8 × 8 × 0.2 cm), and (3) determine the most effective vacuum nozzle angle (0, 45, 90° relative to the surface) for cleaning. Chargeability (nC) of …

    msu

  13. Lithic raw material exploitation between 30,000 BP and 40,000 BP in the Perigord, France

    … Perigord was also carried out, using a pendulum impact tester to quantify fracture predictability and flaking strength. These data were compared with the above data in order to test hypotheses concerning the use of raw material with particular characteristics. There is a moderate tendency for raw …

    washington Repository record for Lithic raw material exploitation between 30,000 BP and 40,000 BP in the Perigord, France (opens in a new tab)

  14. Crashworthiness of Filament Wound CFRP Origami Tubes

    … quasi-static case due to limitations with our impact tester. We will confirm that this geometry can maintain its progressive cascading collapse under dynamic loading conditions to validate the superior crashworthiness of these composite Kresling origami tubes. With improved manufacturing, we …

    washington Repository record for Crashworthiness of Filament Wound CFRP Origami Tubes (opens in a new tab)

  15. ENHANCING LABORATORY INSTRUCTION IN MSE 2610: PEDAGOGICAL TECHNIQUES AND BEST PRACTICES FOR MATERIALS SCIENCE LABS

    … the design and introduction of a novel Charpy impact testing module. We begin by analysing the current structure of the laboratory modules as conducted in Fall 2024 and identifying challenges such as unclear manuals, limited student preparation, and inconsistent teaching assistant (TA) …

    cornell Repository record for ENHANCING LABORATORY INSTRUCTION IN MSE 2610: PEDAGOGICAL TECHNIQUES AND BEST PRACTICES FOR MATERIALS SCIENCE LABS (opens in a new tab)

  16. Πειραματικός-αναλυτικός προσδιορισμός ιδιοτήτων κόπωσης και μελέτη της επίδρασης τους επί της φθοράς επικαλυμμένων κοπτικών εργαλείων κατά το φραιζάρισμα

    … surfaces are often subjected to repetitive impact loads. By that kind of loading their fatigue strength is tested. Fatigue is a main wear mechanism during milling. The impact test has been an accomplished tool for the characterization of the fatigue performance and the adhesion quality of …

    greece Repository record for Πειραματικός-αναλυτικός προσδιορισμός ιδιοτήτων κόπωσης και μελέτη της επίδρασης τους επί της φθοράς επικαλυμμένων κοπτικών εργαλείων κατά το φραιζάρισμα (opens in a new tab)

  17. Engineering properties of multiphase block copolymers

    … effects of microphase separation on the tensile, impact, and melt flow properties of the copolymers were investigated. A novel falling weight impact tester was designed and constructed to meet the needs of this study. The device was fully instrumented to provide a deceleration-time plot of the …

    vt Repository record for Engineering properties of multiphase block copolymers (opens in a new tab)

  18. Natural Fiber-Plastic Composites for Construction Applications

    … type, fiber content, coupling agent content, impact modifier type and impact modifier content on mechanical and impact properties of NFPC. Samples as per DOE runs were conditioned, compounded with twin screw co-rotating extruder, injection molded and tested. The results indicated that bagasse …

    waterloo Repository record for Natural Fiber-Plastic Composites for Construction Applications (opens in a new tab)

  19. The effect of pellets physical properties on handling pelleted biomass material in practical use

    … how variable pellet durability is, how different testers for measuring pellet durability (i.e. resistance to damage in handling) compare against each other, and how the measurements relate to the breakdown of pellets observed in real handling systems. In the first part, wood pellets with different …

    greenwich Download PDF for The effect of pellets physical properties on handling pelleted biomass material in practical use (opens in a new tab)

  20. The effects of preliminary unaffiliated dressage competitions on the mechanical properties of a synthetic equestrian arena surface

    … competition. A surface itself has a direct impact upon an athlete since it is the primary point of contact, therefore any changes which occur could affect performance or the possibility of injury. At present management regimes which are aimed at reducing such risks are based upon anecdotal …

    cent-lancashire Download PDF for The effects of preliminary unaffiliated dressage competitions on the mechanical properties of a synthetic equestrian arena surface (opens in a new tab)

Page 1 of 2