Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"Impact-echo"”.
-
Neural Network Processing of Impact Echo NDT Data
… taken to prevent large scale deterioration. The impact echo test method is one of the most recent of the NDT used on concrete for the detection of damage, and has been applied in this research. However, the interpretation and analysis of the output requires subjective judgement. This research …
-
Advancements in evaluation of air-coupled impact-echo test method
… to investigate a recently-developed air-coupled impact-echo (IE) nondestructive testing (NDT) method, in which microphones replace the traditional physically-coupled IE sensors. To develop an optimum testing system and verify the new method, two concrete plates were tested in the laboratory, one …
-
Air-coupled impact-echo damage detection in reinforced concrete using wavelet transforms
… testing. This study proposes a new impact-echo analysis method using wavelet transforms. The signals recorded from the microphones are analyzed using percentage of energy information to detect in-situ damages. Further, an artificial neural network (ANN) was used in order to test the …
-
Non-Destructive Condition Assessment of Concrete Slabs with Artificial Defects Using Wireless Impact Echo
… the development and validation of a new wireless Impact Echo (IE) system for condition assessment of reinforced concrete slabs. The new IE prototype was compared with other commercially available non-destructive testing (NDT) devices used for similar purposes, namely Ground-Penetrating Radar (GPR) …
-
Probabilistic impact-echo method for nondestructive detection of defects around steel reinforcing bars in reinforced concrete
… this dissertation assesses and improves the Impact-Echo (IE) method for the detection of defects around steel reinforcing bars in concrete. IE involves deducing the presence of a defect from several single-point recordings of a resonant response that results from a non-damaging impact. IE has …
-
LINEAR AND NON-LINEAR FREQUENCY DOMAIN TECHNIQUES FOR PROCESSING IMPACT ECHO SIGNALS TO EVALUATE DISTRIBUTED DAMAGE IN CONCRETE.
… the degree of micro-cracking does not exist. The impact echo test is potentially the best candidate if improvements can be made in the signal processing techniques which are crucial for accurately interpreting the data retrieved from concrete with distributed damage. In this research, two batches …
-
Non-Contact NDT of Concrete Structures Using Air -Coupled Sensors
The second application is air-coupled impact-echo. Two reinforced concrete slabs containing different types of defects were inspected using an air-coupled impact test testing scheme. 2-D scanning impact-echo tests were conducted over the slab containing voids and delaminations. The 2-D scanning …
-
Využití akustických metod pro posouzení vlivu složení cementových kompozitů na průběh degradace vyvolané zvýšenou teplotou
… akustické nedestruktivní metody (NDT) Impact-Echo (IE) jako doplňujícího diagnostického nástroje pro posuzování betonových konstrukcí vystavených vysokým teplotám. Běžně používané diagnostické postupy v případě betonové konstrukce zasažené požárem se nejčastěji omezují na odebírání …
-
Delamination Detection in Concrete Using Disposable Impactors for Excitation
… the concrete cover from the underlying concrete. Impact-echo testing is an effective technique to map delaminations on concrete bridge decks. However, mapping speed is limited by necessary retrieval of the impactor for traditional tests. To achieve higher scanning speeds, it is advantageous to use …
-
Automated Impact Response Sounding for Accelerated Concrete Bridge Deck Inspection
… techniques available for inspection, air-coupled impact-echo testing, or sounding, is a non-destructive evaluation technique to determine the presence and location of delaminations based upon the acoustic response of a bridge deck when struck by an impactor. In this work, two automated air-coupled …
-
Advances in Nondestructive Testing of Concrete Pavements
… First an alternative interpretation of the Impact-Echo method, based on guided wave theory, is presented. This provides a closer match between theoretical and observed results, and ultimately a more accurate basis for testing. A new, time-domain based method is then proposed to address some …
-
Fully non-contact, air-coupled generation and detection of ultrasound in concrete for nondestructive testing
… the disadvantages in the techniques based on the impact-echo method can be avoided and thus data processing is much simpler than that in the impact-echo based techniques. The results of the measurements show that this setup is highly promising and a big advancement towards the rapid ultrasonic …
-
Practicality and capability of NDT in evaluating long-term durability of FRP repairs on concrete bridges
… techniques, active infrared thermography and impact-echo, were chosen as the most suitable methods of bond evaluation. The results of these non-destructive techniques were compared with the actual bond strength for accuracy and consistency. To measure the actual integrity of the bond, direct …
-
Lamb wave evaluation of concrete plates
… equipment consisting of an accelerometer and impact hammer. With this type of equipment and based on array signal processing, the impact-echo (IE) method can be extended with measurements of surface waves; this extension allows an evaluation with Lamb waves. For both the conventional …
-
High-Speed Apparatus and Signal Processing for Accoustic Delamination Detection on Concrete Bridge Decks
… of research investigating the use of acoustic impact-echo testing to detect bridge deck delaminations. The research presented here consists of a study of the acoustic radiation patterns of delamination defects when they are impacted. Acoustic data were collected on an in-service bridge deck and …
-
Αριθμητική και πειραματική διερεύνηση των μηχανικών ιδιοτήτων γεωυλικών και σκυροδέματος με μη καταστρεπτικές μεθόδους
… Ultrasonic Pulse Velocity (UPV) and the Impact Echo (IE) resonance frequency method in accordance with ASTM C215. The research methodology combines extensive finite element method (FEM) numerical simulations with a comprehensive experimental programme. The numerical component comprises …
-
Metodika zkoušení cihelného zdiva při obnově památek
… konkrétně rezonanční metoda (známá také jako impact-echo) a ultrazvuková impulzní metoda, s doplněním o konvenční (destruktivní) zkoušky. V rámci této práce jsou definovány celkem čtyři třídy trvanlivosti a doporučení pro využití prvků z jednotlivých tříd. Pro lepší porozumění chování …
-
Investigation of the Addition of Basalt Fibres into Cement
… concrete such as ultrasonic pulse velocity and impact echo tests. One of major issues with concrete (which has cement as its prime ingredient) is that unlike steel it is quasi-brittle material. It tends to want to crack when tensile stresses develop. Fibres have been added to concrete for many …
-
Correlating Q-Factor Measurements to Other Parameters in Deteriorated Concrete
The impact-echo technique is a nondestructive test used to detect flaws in concrete. Although deterioration can be quantified through the Q-factor, little is known about its relationship to other parameters. This research study explored possible correlations between Q-factors and other parameters …
-
Monitorování a analýza koroze výztužné oceli v železobetonových prvcích a konstrukcích akustickými metodami
… byly vybrány čtyři akustické metody – metoda impact-echo, metoda nelineární akustické spektroskopie, metoda akustické emise a ultrazvuková průchodová pulzní metoda. Pro ověření funkčnosti těchto metod bylo provedeno testování na třech sadách železobetonových vzorků, které byly vystaveny …
Page 1 of 3