Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Impedance Matching Networks"”.
-
Impedance Matching Networks for Wireless Applications
Impedance matching implies maximum power transfer from source to load as well as minimum signal reflection from the load, in an RF system. This explains the importance of impedance matching networks and their continuously increasing use in many electronic applications, as for example RF power …
-
A Synthesis Method for Broad-Band Antenna Impedance Matching Networks
Made available in DSpace on 2014-12-04T21:02:49Z (GMT). No. of bitstreams: 1 0013580.pdf: 3984493 bytes, checksum: 7c8c4af6d09a88a62e4f0aa05b8a6bb4 (MD5) Previous issue date: 1955
-
Power line communications in vehicles : channel measurements and impedance matching networks
… about Channel Transfer Functions and Access Impedance for two vehicles and discussions of our results in the context of VPLC system design. Building on the results of these measurements, an adaptive impedance matching system is designed to improve the power transmission between VPLC devices …
-
Reconfigurable Impedance Matching Networks Based on RF-MEMS and CMOS-MEMS Technologies
Reconfigurable impedance matching networks are an integral part of multiband radio-frequency (RF) transceivers. They are used to compensate for the input/output impedance variations between the different blocks caused by switching the frequency band of operation or by adjusting the output power …
-
Frequency reconfigurable impedance matching networks based on LTCC, fluidic and MEMS technologies for agile RF amplifiers
New frequency reconfigurable impedance matching networks (MNs), or tuners, which can be used to realize various field programmable RF devices, such as amplifiers, are proposed. By enabling field programmability of RF devices, the proposed MNs make it possible to reduce considerably the component …
-
Evaluation of surface fatigue cracks using Rayleigh waves
… using principles of physical acoustics, and the impedance matching networks are introduced to increase the efficiency of the transducer. The new transducers used in combination with the variable impedance matching networks increase the efficiency of SAW devices produced by a factor of five. An …
-
Tunable Impedance Matching Network Fundamental Limits and Pracitical Considerations
… which arises from these factors is that of impedance mismatch. Recently, tunable impedance matching networks have begun to be implemented to address this problem. ^ This dissertation presents the first in-depth study on the frequency tuning range of tunable impedance matching networks. Both …
-
Nonlinear device characterization and second harmonic impedance tuning to achieve peak performance for a SiC power MESFET device at 2GHz
… was used in designing the input and output impedance matching networks that would optimize the performance of the device. A power MESFET device like the one used to conduct this experiment is mainly used in designing power amplifiers for communication systems including the transmitters used …
-
Design and demonstration of ultra-miniaturized glass-based 3d IPD diplexers and 3d IPAC RF front-end modules for LTE applications
… of discrete components and substrate-embedded impedance matching networks. Design and process innovations on ultra-thin (50 -100 μm) glass substrates enabled high-Q passives embedding, component-level electromagnetic interference (EMI) shielding and high package reliability. The proposed …
-
Field theory analysis of rectangular and circular waveguide discontinuities for filters, multiplexers and matching networks
… In this thesis, the application of the mode matching method is described as well as their modification to different kinds of structure in rectangular and circular waveguides. The task is to design and optimize filters, multiplexers and impedance matching networks. In its most general form, …
-
LTCC-based impedance tuner using liquid metal for reconfigurable microwave circuits
… needed specifications. In this context, as the impedance matching networks are important for Radiofrequency/Microwave circuits design, we have developed our idea with the aim of designing a reconfigurable liquid metal tuner, which allows the matching up to 10 GHz in frequency. The development of …
-
IMPROVEMENTS TO THE CReSIS HF-VHF SOUNDER & UHF ACCUMULATION RADAR
… was developed along with a set of lumped-element impedance matching networks suitable for integration on a Twin Otter Aircraft. The system was integrated and deployed to Greenland in 2016, showing improved detection capabilities of the ice/bottom interface in some areas of Jakobshavn Glacier and …
-
Impact of Antenna Mutual Coupling, Propagation, and Nonreciprocity on Propagation-Based Key Establishment
… incorporates transmit sources and receive loads, impedance matching networks, low-noise amplifiers (LNAs), mutually coupled antenna arrays, and a passive eavesdropper. Afterwards, a detailed analysis is performed to quantify the impact of coupling, type of impedance matching network, and proximity …
-
A programmable-gain amplifier and an active inductor for in-vehicle power line communications
… with high signal attenuation. Also, the access impedance changes a lot in different frequency ranges. These properties impose design challenges at both system level and circuit levels of a VPLC system. This thesis presents the design of two critical building blocks of a VPLC system, namely, a …
-
Modal analysis methods for small antenna design
… as the real structure. Furthermore, the lumped impedance matching networks are treated in the mode analysis. The influence of such lumped networks on the characteristic modes is investigated and the modal efficiency is defined. The definition of the modal admittances and impedances are given and …
-
Study and design of RF energy harvesting system
… 5.8 GHz), relevant to Wi-Fi and 5G. Innovative impedance matching networks and rectifier topologies are proposed, achieving power conversion efficiencies exceeding 81% in multi-band scenarios and outperforming comparable designs in the literature. The thesis also makes a significant contribution …
-
Design, Integration, and Deployment of UAS borne HF/VHF Depth Sounding Radar and Antenna System
… relatively longer wavelength. However, its input impedance had to be modified by resistive loading in order to avoid high power reflections back to the transmitter. The antenna bandwidths were further enhanced by employing impedance matching networks that resulted in 17.3% and 7.1% bandwidths at …
-
Impedance Matching and PSpice<sup>R</sup> Simulation of One Atmosphere Uniform Glow Discharge Plasma (OAUGDP™) Reactor/Actuator Systems
… Plasma (OAUGDP™) reactors and actuators ¾ impedance matching and PSpice<sup>R</sup> simulation.</p> <p>An OAUGDP™ reactor/actuator with the plasma energized can be modeled as a capacitor in parallel with a resistor. In addition, the non-ideality of the transformer between the RF power …
-
Development of Tunable RF Integrated Passive Devices
… implement devices such as filters, couplers and impedance-matching networks for a wide range of system-in-package applications. However, most of the IPD circuits do not yet have any tunable/reconfigurable functions for use in frequency agile applications. The objective of this research is to …
-
Millimeter-Wave Concurrent Dual-Band BiCMOS RFIC Transmitter for Radar and Communication Systems
… technique. A new class of concurrent dual-band impedance matching networks and technique for synthesizing them are presented together with a 25.5/37-GHz concurrent dual-band PA. These matching networks enable simultaneous matching of two arbitrary loads to two arbitrary sources at two different …
Page 1 of 2