Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Impedance Transformation"”.

  1. Lithium Niobate Piezoelectric Transformers For Compact Electronics And Atmospheric Plasma Generation

    … on-chip, low frequency passive voltage gain and impedance transformation. These devices exhibit efficiencies as high as 95% and voltage gain above unity for large capacitive loads (>2 nF). Nanosecond 1064 nm pulsed laser ablation is demonstrated as a method for deep etching of bulk lithium …

    ucf Repository record for Lithium Niobate Piezoelectric Transformers For Compact Electronics And Atmospheric Plasma Generation (opens in a new tab)

  2. A Millimeter-Wave Three-Way Doherty Power Amplifier for 5G NR OFDM

    … Doherty active load mod ulation, reduce the impedance transformation ratio at back-off, and directly absorb the device parasitic capacitance. Its design procedure and trade-offs are discussed in detail. A 38-GHz PA prototype is implemented in the GlobalFoundries 45-nm CMOS SOI process, …

    rice Repository record for A Millimeter-Wave Three-Way Doherty Power Amplifier for 5G NR OFDM (opens in a new tab)

  3. Transformer-Based Tunable Matching Networks implemented in Silicon CMOS

    … with the explicit goal of providing large impedance-tunability and low insertion loss, at a fixed resonant frequency have been proposed. The two tunable networks, namely Transformer-plus-L-Match Network (TLMN) and Transformer-plus-Pi-Match Network (TPMN) are fully-integrated and prototype …

    washington Repository record for Transformer-Based Tunable Matching Networks implemented in Silicon CMOS (opens in a new tab)

  4. Integrated optical devices in lithium niobate

    … A/D converter, and a high voltage sensor. An Impedance transformation equation for an exponential line is derived and used to obtain relations for the propagation constant of an optical waveguide with linearly graded index. The results are used to study the effect of a Ta₂O₅ film on the …

    ubc Repository record for Integrated optical devices in lithium niobate (opens in a new tab) Download PDF for Integrated optical devices in lithium niobate (opens in a new tab)

  5. Integrated output transformers for high bandwidth, high linearity RF-DAC applications

    … to reduce the swing of the output voltage is impedance transformation. This paper presents modelling, analysis and synthesis of a 65nm CMOS on-chip transformer (bandwidth=3.3GHz, from 700MHz to 4GHz) to be used as an output buffer of a mixing-DAC.To analyse this approach, a model of the CMOS …

    eindhoven Repository record for Integrated output transformers for high bandwidth, high linearity RF-DAC applications (opens in a new tab)

  6. Design for optical metamaterial design for optical metamaterial absorber

    … and theories, such as cavity resonance, impedance match, equivalent circuit model and waveguide stop light mode. First, via utilizing the cavity resonance, a tunable narrowband MM absorber/emitter for thermophotovoltaic (TPV) is designed and analyzed based on gold nanowire cavities to …

    must-thes Repository record for Design for optical metamaterial design for optical metamaterial absorber (opens in a new tab)

  7. Integrated millimeter Wave CMOS Power Amplifiers for 5G Systems

    … bias. The TRX-switch provides a downward 1:2 impedance transformation in TX-mode to boost reachable output power, and in RX-mode it provides an upward impedance transformation of 2:1 for optimal noise figure. The adaptive bias brings significant improvement of both saturated output power and 1 …

    lund Repository record for Integrated millimeter Wave CMOS Power Amplifiers for 5G Systems (opens in a new tab) Download PDF for Integrated millimeter Wave CMOS Power Amplifiers for 5G Systems (opens in a new tab)

  8. Nonlinear, passive and active inclusions to tailor the wave interaction in metamaterials and metasurfaces

    … switching, modulating, phasing, filtering, impedance transformation, photomixing and frequency synthesis in the THz spectrum. Last I present various metamaterial designs applied to invisibility cloaks based on the scattering cancellation mechanism enabled by plasmonic materials and …

    texas Repository record for Nonlinear, passive and active inclusions to tailor the wave interaction in metamaterials and metasurfaces (opens in a new tab)

  9. Transmission Lines For Ir Signal Routing

    … of transmission-line parameters: characteristic impedance, attenuation constant and effective index of refraction. These parameters were extracted by fitting the computed impedance as a function of transmission-line length to the usual impedance transformation equation. The material properties …

    ucf Repository record for Transmission Lines For Ir Signal Routing (opens in a new tab)

  10. Design and integration techniques for compact, wideband and multi-functional baluns

    … requirements, while effectively providing an impedance transformation and converting balanced-to-unbalanced RF signals. However, current balun technologies are typically large in size, lossy, or narrowband, calling for the development new design techniques and integration methods that will …

    cork Repository record for Design and integration techniques for compact, wideband and multi-functional baluns (opens in a new tab)

  11. Investigation of RF Front-Ends For Simultaneous Multinuclear MR Imaging and Spectroscopy

    … circuit and was evaluated based on a high input impedance Op Amp across multiple bands. Noise models of an Op Amp were developed to find an acceptable NF region condition. Impedance transformation and decoupling were also evaluated at 1H/13C/15N. The overall evaluation of the approach provides a …

    tamu Repository record for Investigation of RF Front-Ends For Simultaneous Multinuclear MR Imaging and Spectroscopy (opens in a new tab)

  12. Fully Integrated 60 GHz Power Amplifiers in 45nm SOI CMOS

    … line resistance Ropt allows for the use of low impedance transformation matching networks. The reliability of CMOS PA under large signal operation is also addressed and improved with the FET-stacking approach applied in this work. This thesis divides the millimeter-wave PA design problem in to …

    waterloo Repository record for Fully Integrated 60 GHz Power Amplifiers in 45nm SOI CMOS (opens in a new tab)

  13. CMOS linear RF power amplifier with fully integrated power combining transformer

    … with traditional PA design methods and load impedance transformation networks. This issue is addressed by the use of on-chip, highly efficient power combining networks such as the one in this work: A series combining transformer (SCT). The problem of using CMOS becomes even more critical for …

    brazil-ufrgs Repository record for CMOS linear RF power amplifier with fully integrated power combining transformer (opens in a new tab)

  14. A HIGHLY EFFICIENT, MEGAWATT CLASS CONSTANT IMPEDANCE TUNABLE POWER EXTRACTION CIRCUIT FOR MOBILE IONOSPHERIC HEATERS

    … matching the relatively high electron beam impedance (5 kΩ) to the load antenna (50 Ω) creates situations where high Q resonant circuits are necessary to achieve the high efficiencies required. We design a pi-circuit to achieve the impedance matching and validate the design experimentally. …

    maryland Repository record for A HIGHLY EFFICIENT, MEGAWATT CLASS CONSTANT IMPEDANCE TUNABLE POWER EXTRACTION CIRCUIT FOR MOBILE IONOSPHERIC HEATERS (opens in a new tab)

  15. Machine learning-driven design automation for high-frequency circuits and packaging

    … on performance targets such as transmission line impedance, insertion loss, and crosstalk while considering design constraints. ISOP achieves this by using an ML surrogate model, a customized optimization method for global and local search, and tailored objective functions with adaptive weight …

    texas Repository record for Machine learning-driven design automation for high-frequency circuits and packaging (opens in a new tab)

  16. Antenna systems research

    … by near field to far field data processing transformation has been demonstrated. Correction factors which allow gain comparison measurements to be made in short range length facilities, such as certain types of anechoic chamber, have also been presented. Antenna measurement techniques which …

    greenwich Download PDF for Antenna systems research (opens in a new tab)

  17. Advanced Circuit and System Techniques for High-Performance Beamforming Front-Ends

    … to provide compact quarter-wave-equivalent impedance transformation. This approach extends bandwidth, reduces area, and satisfies noise matching, impedance matching, and transmit-to-receive isolation requirements. Measurements of the 37-41 GHz prototype demonstrate 20 dBm output power with …

    waterloo Repository record for Advanced Circuit and System Techniques for High-Performance Beamforming Front-Ends (opens in a new tab)

  18. Analysis of the potential of gallium nitride based monolithic power amplifiers in the microwave domain with more than an octave bandwidth

    … The main limiting factor is the large impedance transformation ratio to be dealt with in the output matching network, attributable to large gate width devices. Since this limitation is not addressed by the Bode-Fano criterion, it needs special consideration and is addressed by reference …

    freiburg-diss Repository record for Analysis of the potential of gallium nitride based monolithic power amplifiers in the microwave domain with more than an octave bandwidth (opens in a new tab)

  19. Advanced High Efficiency and Broadband Power Amplifiers Based on GaN HEMT for Wireless Applications

    … and analyzed. It is demonstrated that the impedance tuning of the second and third harmonics at the drain terminal of a transistor is crucial to achieve a broadband performance. The effect of harmonics terminations on power amplifier’s bandwidth up to fourth harmonics is investigated. The …

    poli-torino Repository record for Advanced High Efficiency and Broadband Power Amplifiers Based on GaN HEMT for Wireless Applications (opens in a new tab)

  20. Development of High-Efficiency Switch-Mode Concurrent Dual-Band RF Power Amplifiers

    … to single-ended conversion but also a 1:4 impedance transformation. The final PA was fabricated and measured in lab. A drain efficiency of 60% was achieve when operating concurrently at 880 MHz and 1.49 GHz with less than 0.5 dB output power drop compared single-mode operation. The …

    iastate Repository record for Development of High-Efficiency Switch-Mode Concurrent Dual-Band RF Power Amplifiers (opens in a new tab)

Page 1 of 2