Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 413 for “"Impeller"”.

  1. Unconventional centrifugal pump impeller design

    Electronic Thesis or Dissertation

    alabama Repository record for Unconventional centrifugal pump impeller design (opens in a new tab)

  2. CFD-Based Impeller and Seal Rotordynamic Forces

    … operating turbomachinery components such as impellers and seals are subject to flow induced forces known as rotordynamic forces. Rotordynamic forces can be detrimental to the machine stability and longevity. Therefore, industrial guidelines, such as American Petroleum Institute level II …

    tamu Repository record for CFD-Based Impeller and Seal Rotordynamic Forces (opens in a new tab)

  3. Blade Number Influence on Centrifugal Impeller Flow Behavior

    … the fluid inside the passage of 5 and 7 bladed impellers. The main purpose is to understand the influence of the number of blades on the performance and flow behavior of a centrifugal impeller. To analyze the flow behavior, the particle image velocimetry (PIV) technique that is known as a …

    waterloo Repository record for Blade Number Influence on Centrifugal Impeller Flow Behavior (opens in a new tab)

  4. Optimisation of the aluminium compressor impeller machining process

    … for the manufacture of automotive turbocharger impellers. Phase 1 work comprised a capability study of the Al-Si C355 impeller machining process within Doncasters Sterling. The results highlighted that both C\(_p\) and C\(_{pk}\) values were generally above the automotive industry standard of …

    birmingham Download PDF for Optimisation of the aluminium compressor impeller machining process (opens in a new tab)

  5. Multipoint optimization of a 3D radial compressor impeller

    Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2005

    msu Repository record for Multipoint optimization of a 3D radial compressor impeller (opens in a new tab)

  6. Experimental evaluation of the flow field inside an open faced impeller

    … of the pump studied. The pump had an open faced impeller of 33.65 cm diameter with 5 blades of backswept design. It was felt that the best way to resolve some of the questions related to Hossain’s results was to determine the fluid velocity field inside the pump. Thus the flow field through the …

    tamu Repository record for Experimental evaluation of the flow field inside an open faced impeller (opens in a new tab)

  7. Understanding Volute Loss Characteristics and Impeller-Volute Interactions in Centrifugal Compressors

    … the interaction between the volute and the impeller. Detailed numerical simulations derive comprehensive loss maps of a typical volute, revealing that the matching coefficient yielding minimum volute losses is not constant but a function of the absolute flow angle at the volute inlet. The …

    qucosa-diss

  8. CFD analysis and redesign of centrifugal impeller flows for rocket pumps

    The analysis and redesign of a centrifugal impeller for a rocket pump is presented in this thesis. A baseline impeller was designed by Rocketdyne for the NASA Marshall Pump Consortium. Initially, the objective was to reduce the circumferential exit flow distortion of the baseline impeller. Later in …

    vt Repository record for CFD analysis and redesign of centrifugal impeller flows for rocket pumps (opens in a new tab)

  9. The effects of tank size and impeller type on turbulent flocculation

    … and (2.7 ft)$\sp3$ ($\approx$560L) with two impeller types (Rushton turbine and A310 fluid foil impeller) were evaluated experimentally using a laser Doppler velocimeter and numerically using a computational fluid dynamic software called FIDAP. The results of both the experimental and …

    uiuc Repository record for The effects of tank size and impeller type on turbulent flocculation (opens in a new tab)

  10. Impact of impeller blade trimming on the performance of centrifugal compressors

    Centrifugal impeller blade trimming can be used to modify an existing impeller design to meet a new flow or pressure ratio design point. Using flow trimming, the passage area is reduced from inlet to outlet along the entire meridional length of the impeller to reduce the flow coefficient of the …

    msu Repository record for Impact of impeller blade trimming on the performance of centrifugal compressors (opens in a new tab)

  11. Orthogonal decomposition as a design tool: With application to a mixing impeller

    … the design of a laboratory scale overhead mixer impeller. The case study presented here is compared with the design of the Kar Dynamic Mixer impeller developed by The Dow Chemical Company. The result of which is a customized design for a refined set of operating conditions with improved …

    iastate Repository record for Orthogonal decomposition as a design tool: With application to a mixing impeller (opens in a new tab)

  12. Local Forcing Mechanisms of Centrifugal Compressor Blades Excited by Impeller-Diffuser-Interaction

    … work was to investigate variations in the local impeller blade excitation mechanisms with changing operating conditions. Therefore, a state-of-the-art industrial design compressor from a turbocharging application has been integrated into the high-speed centrifugal compressor facility 'RIGI', …

    ethz Repository record for Local Forcing Mechanisms of Centrifugal Compressor Blades Excited by Impeller-Diffuser-Interaction (opens in a new tab)

  13. Modelling and experimental study of a basket impeller column for biodiesel production

    … of a novel extractive reactor, the Basket Impeller Column (BIC), to biodiesel production using waste cooking oil (WCO) as feedstock and a commercial immobilised lipase, Novozym 435, as catalyst. A steady-state model of the BIC was developed using Aspen Plus process simulation software. …

    unsw Repository record for Modelling and experimental study of a basket impeller column for biodiesel production (opens in a new tab)

  14. Parametric Study and Optimization of Mixing Behavior in an Impeller Driven Electrowinning System

    … electrowinning reactor incorporating a rotating impeller has been proposed. The reduced electrode spacing shortens the transport distance between the bulk electrolyte and the electrode surfaces and decreases electrolyte resistance, while the rotating impeller actively enhances fluid motion, …

    houston Repository record for Parametric Study and Optimization of Mixing Behavior in an Impeller Driven Electrowinning System (opens in a new tab) Embargoed until 2028-08-01

  15. Experimental determination of solids suspension with angled impeller in a pharmaceutical mixing vessel

    Angled-mounted impellers are commonly used in a number of pharmaceutical industry applications, from laboratory reactors to full-scale tanks. In these systems, the impeller is not centrally and vertically mounted, as in most stirred vessels, but it enters the vessel, and is therefore immersed in …

    njit Repository record for Experimental determination of solids suspension with angled impeller in a pharmaceutical mixing vessel (opens in a new tab)

Page 1 of 21