Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 143 for “"Impinging Jet"”.

  1. Impinging jet flows for micro-cooling

    … of confined circular multiple air jets normally impinging on a flat heated surface is reported. The parametric effects of the jet exit Reynolds numbers, jet-to-target spacing and jet-to-jet spacing on the local and average heat transfer coefficient on five jets in equilaterally …

    nus Repository record for Impinging jet flows for micro-cooling (opens in a new tab) Download file for Impinging jet flows for micro-cooling (opens in a new tab)

  2. Ablation and ignition by impinging jet flows

    Two separate heat transfer problems that involve jet flows impinging on a reacting target are studied through modeling and experimentation. The first system is an ablating carbon-carbon specimen exposed to high heat fluxes from an oxy-acetylene torch which has applications in atmospheric re-entry …

    texas Repository record for Ablation and ignition by impinging jet flows (opens in a new tab)

  3. Two-Phase Simulation of Nanofluid in Impinging Jet

    … of water-Al2O3 nanofluid in a single and multi-impinging confined jets as one of the heat transfer enhancement methods. Numerical models using Finite Volume method (FVM) are applied to study the effect of different parameters on the flow and heat transfer characteristics. These parameters are …

    calgary Repository record for Two-Phase Simulation of Nanofluid in Impinging Jet (opens in a new tab)

  4. Polymer-induced turbulence modifications in an impinging jet

    … turbulence characteristics in a submersed liquid impinging-jet configuration. Turbulent impinging jets are commonly used in technological applications such as drying, scouring, cooling or heating due to an enhancement in transport characteristics in the impingement region under certain …

    uiuc Repository record for Polymer-induced turbulence modifications in an impinging jet (opens in a new tab)

  5. Numerical study of an impinging jet with embedded vortices

    Large-eddy simulations of round forced impinging jets at laboratory scale are performed, as a simplified model of the helicopter rotor wake; the goals were to understand the dynamics of the vortices, and to help develop engineering correlation and models. First, I studied the flow over smooth …

    queens Repository record for Numerical study of an impinging jet with embedded vortices (opens in a new tab)

  6. Simulations of Impinging Jet with a Range of Configuration

    Impinging jet technique is widely increasing across the globe due to its ability to produce high heat and mass transfer as compared to other traditional methods. Three cases of impinging jets related to cooling technologies for a gas turbine were investigated. The first case involves a single jet …

    sdstate Repository record for Simulations of Impinging Jet with a Range of Configuration (opens in a new tab)

  7. Particulate Deposition Prediction of Diluted Two-Phase Impinging Jet

    … particle transport and deposition process in impinging jet flow, in light of the available experiments, can be gained using computational fluid dynamics (CFD) numerical simulations. The present thesis focuses mainly on the prediction of aerosol particle transport and deposition in impinging …

    carleton Repository record for Particulate Deposition Prediction of Diluted Two-Phase Impinging Jet (opens in a new tab)

  8. Flow Physics and Mixing of a Confined Impinging Jet Mixer

    Confined Impinging Jet Mixers (CIJM) are employed widely in chemical processes that requires fast mixing such as precipitation and production of nanoparticles because of their ability to provide rapid mixing at small-scales. In this mixing device, two jets from opposite sides directly impinge on …

    jhu Repository record for Flow Physics and Mixing of a Confined Impinging Jet Mixer (opens in a new tab)

  9. The design and validation of an impinging jet test facility.

    An experimental jet impingement facility was constructed with the capability of conducting a detailed analysis of the local heat transfer coefficients beneath an array of large impinging jets. The facility was validated with initial heat transfer studies that determined an appropriate jet discharge …

    baylor Repository record for The design and validation of an impinging jet test facility. (opens in a new tab)

  10. Predictive Model for a PV/Thermal Impinging Jet Solar Collector

    This thesis is a study of impinging jet PV/Thermal collectors. More specifically, the thesis deals with the development of a model for this type of collector and its validation. The model developed for this thesis consists of a series of energy balances at every layer of the collector. The …

    waterloo Repository record for Predictive Model for a PV/Thermal Impinging Jet Solar Collector (opens in a new tab)

  11. An experimental investigation of round normal impinging jet of water

    <p>The various flow parameters of round jets of water impinging normally on a flat plate are measured experimentally. The velocity and pressure distribution along the axis of the jet at various sections of the jet parallel to the horizontal lucite striking plate and along the impinging surface was …

    njit Repository record for An experimental investigation of round normal impinging jet of water (opens in a new tab)

  12. A finite difference solution of an ideal, normal, impinging jet

    <p>The free boundary of a circular jet of an irrotational, inviscid, incompressible, fluid impinging normally to a flat surface from a height of 2 times the nozzle radius, was found by a finite difference method.</p><p>Starting with a graphical solution, approximate values of the potential were …

    njit Repository record for A finite difference solution of an ideal, normal, impinging jet (opens in a new tab)

  13. MULTI- HOLE IMPINGING JET SPRAY ANALYSIS IN ENGINE-LIKE CONDITIONS

    … formation in combustion chamber. In market, impinging jet injector is a novel technology which can generate better fuel atomization and spray formation. This report studied the impinging spray characteristics under different engine-like conditions, which has been covered in three phases of …

    mtu Repository record for MULTI- HOLE IMPINGING JET SPRAY ANALYSIS IN ENGINE-LIKE CONDITIONS (opens in a new tab)

  14. Breakup of a surface-mounted droplet by an impinging jet flow

    … droplets exposed to an accelerating impinging jet flow. The investigation focused on: (i) the critical flow velocities in the breakup process, and (ii) characterizing the geometry of both the originating droplet prior to breakup and the resulting child droplet. Impinging jet flows …

    waterloo Repository record for Breakup of a surface-mounted droplet by an impinging jet flow (opens in a new tab)

  15. High Speed Impinging Jet Plating: Slot Jet and Through-Hole Plating

    The characteristics of two different impinging jet plating systems was investigated in this study. The local mass transfer rates for slot jet system were measured with use of sectioned electrode technique and were compared with the other previous studies. Based on the measured mass transfer …

    uiuc Repository record for High Speed Impinging Jet Plating: Slot Jet and Through-Hole Plating (opens in a new tab)

  16. Investigation on the Interaction of an Impinging Jet with Cylinder Wakes

    Jet impingement cooling is a widely used cooling method due to the high heat transfer rates associated with it. Research for improving heat transfer rates for this cooling is still being carried out due to its broad application in various fields like gas turbine blade cooling, electronic component …

    embry-riddle Repository record for Investigation on the Interaction of an Impinging Jet with Cylinder Wakes (opens in a new tab)

  17. Modeling and measurement of surface pressure fluctuation in an impinging jet

    Impinging jets are used in many engineering and industrial applications, including heating, cooling, drying, food processing, and surface cleaning, among others. The present thesis work is focused on modeling and studying the unsteady wall-pressure signature produced by a jet impinging normally on …

    msu Repository record for Modeling and measurement of surface pressure fluctuation in an impinging jet (opens in a new tab)

  18. SCALE UP OF DNA-LINEAR POLYETHYLENIMINE NANOPARTICLES USING CONFINED IMPINGING JET MIXING

    … are needed for animal studies. Using a confined impinging jet (CIJ) system to perform flash nano-complexation (FNC) on DNA and PEI solutions is a promising model for generating large volumes of particles with high reproducibility. Using the established engineering parameters of DNA concentration, …

    jhu Repository record for SCALE UP OF DNA-LINEAR POLYETHYLENIMINE NANOPARTICLES USING CONFINED IMPINGING JET MIXING (opens in a new tab)

  19. Solid-Particles Deposition Through a Turbulent Impinging Jet Using Lattice Boltzmann Method

    … has been developed to investigate a 3D turbulent impinging jet using the lattice Boltzmann method (LBM) in conjunction with large eddy simulation (LES) and the multiple relaxation time (MRT) models. This work proposed an improvement in the LBM-cellular automata (LBM-CA) probabilistic method. In …

    waterloo Repository record for Solid-Particles Deposition Through a Turbulent Impinging Jet Using Lattice Boltzmann Method (opens in a new tab)

Page 1 of 8