Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Impression materials"”.
-
Surface Reproducibility Of Impression Materials
… in vitro detail reproduction of elastomeric impression materials. Moreover, studies utilizing this mold have been graduated at room temperature, not normal mouth temperature. Bovine teeth, being similar to human teeth in microstructure and composition, are the closest substitutes that can be …
-
Mechanical Properties Of Dental Impression Materials
Impression materials make a record of tooth structure and provide a critical step in many dental applications. The mechanical properties of the impression material determine its clinical viability. Purpose: This thesis examines three novel methods for measuring mechanical properties of elastomeric …
-
The Disinfection of Dental Impression Materials
… the dental literature, on the contamination of impression materials by oral microorganisms, are limited, and the aim of the first part of this thesis was to assess microbial survival in impression moulds prepared from polysulphide, poly (vinyl siloxane) and alginate materials. The viability of …
-
Permament deformation of some elastomeric dental impression materials
… the elastic recovery of elastomeric dental impression materials following the application of various deforming strains. One brand from each chemical group of available elastomers was selected to allow for relative ranking of the results from each deformation test mode. The literature review …
-
Dimensional changes of polysulfide impression materials over time.
… of time on dimensional changes of polysulfide impression materials over time. A stainless steel die fabricated according to the ADA, Standards Specification No.19 was used. Measurements were carried out at 15 minutes intervals up to 3 hours and at 6, 12, and 24 hours. Results, the mean, and the …
-
Evaluation of Accuracy of Impression Materials with Different Mixing Techniques
… stability of irreversible hydrocolloid impression materials with three mixing techniques. A comparison between vacuum-mixed, mechanically-mixed and manually-mixed techniques was evaluated for each impression material. Materials and Methods: Three irreversible hydrocolloid impression …
-
A laboratory evaluation of detail reproduction, contact angle, and tear strength of three elastomeric impression materials
… or dies. Recently, the most frequently used impression materials have been polyether (PE) and polyvinyl siloxane (PVS). However, both have their limitations: PVS is inherently hydrophobic, and PE is rigid. In order to take advantage of the desirable qualities of both PVS and PE impression …
-
The Effect of Three Mixing Methods on the Physical Properties and Porosity of Alginate Impression Materials
… potential deficiencies of hand mixing alginate impression materials, a semiautomatic and auromatic mixing machine were developed to create a more smooth, dense, and bubble-free paste. Despite its smooth and dense consistency, little was known about the materials physical properties. PURPOSE: The …
-
In vitro φαρμακολογική μελέτη του ορίζοντος (Ο3) ως βιοδραστικό μόριο με αντιμικροβιακή δράση και η επίδρασή του στη μεταβολή διαστάσεων και στην επιφάνεια των οδοντιατρικών υλικών αποτύπωσης
… bacteria of oral flora, dental impression materials are disinfected byimmersion in liquid disinfection solutions. In the present study ozone disinfection wasapplied, by means of a prototype automated disinfection device. The aim of thepresent dissertation is to compare the …
-
An In-Vitro Investigation of the Physical Properties of Alginate Alternatives
… hydrocolloid (alginate) alternatives. The materials that were tested are Position Penta Quick® (3M ESPE™), Silgimix® (Sultan Dental) and Alginot® (Kerr™). These materials were tested in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials and No. 19 for Dental …
-
ΣΥΜΒΟΛΗ ΣΤΗ ΜΕΛΕΤΗ ΤΗΣ ΑΠΟΤΥΠΩΤΙΚΗΣ ΙΚΑΝΟΤΗΤΑΣ ΤΩΝ ΕΛΑΣΤΟΜΕΡΩΝ ΑΠΟΤΥΠΩΤΙΚΩΝ ΥΛΙΚΩΝ
… EXPERIMENTAL STUDY HAS BEEN MADE CONCERNING THE IMPRESSION ABILITY AND THE MODIFICATION OF ACCURACY 40 DAYS AFTER THE TAKEN IMPRESSION. THE MODIFICATION OF THE IMPRESSION SURFACE ROUGHNESS IN CORRELATION WITH THE TIME HAS ALSO BEEN RESEARCHED. FOR THIS PURPOSE 16 IMPRESSION MATERIALS WHICH …
-
Physical, acoustical, and psycholphysical comparisons between earmolds resulting from poly (ethyl methacrylate) and condensation reaction silicone ear impression material
… and poor physical fit. Information regarding ear impression materials suggests that the problem lies within poor impression techniques, poor impression materials, or a combination of the two.</p> <p>Ear impressions were obtained for twelve subjects with poly(ethyl methacrylate) and condensation …
-
ΣΥΜΒΟΛΗ ΣΤΗ ΜΕΛΕΤΗ ΤΗΣ ΕΛΑΣΤΙΚΗΣ ΣΥΜΠΕΡΙΦΟΡΑΣ ΤΩΝ ΕΛΑΣΤΟΜΕΡΩΝ ΑΠΟΤΥΠΩΤΙΚΩΝ ΥΛΙΚΩΝ ΠΟΛΥΒΙΝΥΛΣΙΛΟΞΑΝΗΣ
… BEHAVIOUR OF THE POLYVINYL- SILOXANE ELASTOMERIC IMPRESSION MATERIALS HAS BEEN MADE. YOUNG'S MODULUS OF ELASTICITY HAS BEEN STUDIED AS WELL AS SLOPE B OF THE DL-F DEPENDENCE CURVE IN THE ELASTIC AREA.ALSO, PERMANENT DEFORMATION AND FRACTURE LIMITS WERE STUDIED. FOR THIS PURPOSE25 POLYVINYLSILOXANE …
-
ΣΥΜΒΟΛΗ ΣΤΗ ΜΕΛΕΤΗ ΤΗΣ ΓΡΑΜΜΙΚΗΣ ΣΥΣΤΟΛΗΣ ΤΩΝ ΑΛΓΙΝΙΚΩΝ ΑΠΟΤΥΠΩΤΙΚΩΝ ΥΛΙΚΩΝ
… TO INVESTIGATE THE LINEAR SHRINKAGE OF ALGINATE IMPRESSION MATERIALS. 17 HYDROCOLLOID ALGINATES, 3 SILICONISED ALGINATES AND VOCOLOIDWERE STUDIED. THE MEASUREMENTS WERE MADE WITH A LINEAR VERNIER MICROSCOPE CAPABLE OF MEASURING TO 0,01 MM THE INITIAL MEASUREMENT WAS MADE 10 MIN FROM THE START OF …
-
Effect of Time on Gypsum-Impression Material Compatibility
… hydrocolloid (alginate) alternatives. The test materials were Alginot® (Kerrâ„¢), Position Penta Quick® (3M ESPEâ„¢) and Silgimix® (Sultan Dentalâ„¢). The irreversible hydrocolloid impression material, Jeltrate Plus antimicrobial® (Dentsply Caulkâ„¢) served as the control. Materials and …
-
Quantitative analysis of tooth wear in-vivo using 3D scanning technology
… patients over a period of 12 months. Methods and materials: A Stainless Steel Model (SSM) was fabricated consisting of seven stainless-steel ball-bearings embedded in a horseshoe-shaped base. The dimensions of the SSM were ascertained using a Coordinate Measuring Machine (CMM). The CMM calibrated …
Page 1 of 2