Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"Impurity Effects"”.

  1. Impurity Effects in All-Vanadium Redox Flow Batteries

    <p>In this dissertation, the effects of VOSO<sub>4</sub> [vanadyl sulfate] source and impurities on the beginning-of-life (BOL) performance of an all-vanadium redox flow battery (VRFB) are explored. Battery performance was monitored at 50% state of charge (SOC) using electrolyte with …

    ut-knoxville Repository record for Impurity Effects in All-Vanadium Redox Flow Batteries (opens in a new tab)

  2. Impurity effects in interacting quantum many-body systems

    Impurities have a wide range of effects in interacting quantum many-body systems. They can interplay with interactions and lead to new electronic states of matter. They can also serve as a probe of an "intrinsic" many-body system. In this thesis, we consider the effects of impurities in three …

    rice Repository record for Impurity effects in interacting quantum many-body systems (opens in a new tab)

  3. Impurity effects in antiferromagnetic quantum spin-1/2 chains

    We calculate the effects of a single impurity in antiferromagnetic quantum spin-1/2 chains with the help of one-dimensional quantum field theory and renormalization group tech niques in the low temperature limit. We are able to present numerical evidence from ex act diagonalization, numerical Bethe …

    ubc Repository record for Impurity effects in antiferromagnetic quantum spin-1/2 chains (opens in a new tab) Download PDF for Impurity effects in antiferromagnetic quantum spin-1/2 chains (opens in a new tab)

  4. Bismuth impurity effects on copper: examining embrittlement in immiscible binary metallic systems

    … stems not only from the strain of a large impurity at the grain boundary, but also from a reduced hybridization between the d and s states of the copper atoms that surround the bismuth impurity. Additionally, it has been suggested by others that bismuth will intercalate into the grain …

    missouri Repository record for Bismuth impurity effects on copper: examining embrittlement in immiscible binary metallic systems (opens in a new tab)

  5. Syngas Impurity Effects on Cell Growth, Enzymatic Activities and Ethanol Production via Fermentation

    … For this work, ammonia (NH3) and benzene (C6H6) effects on cell growth, enzymatic activities of hydrogenase and alcohol dehydrogenase (ADH), and product formation were studied. NH3, after entering media, will be converted rapidly to NH4+, which will raise the total osmolarity of the media. NH3, …

    byu Repository record for Syngas Impurity Effects on Cell Growth, Enzymatic Activities and Ethanol Production via Fermentation (opens in a new tab) Download PDF for Syngas Impurity Effects on Cell Growth, Enzymatic Activities and Ethanol Production via Fermentation (opens in a new tab)

  6. Sulfur Tolerant Solid Oxide Fuel Cell for Coal Syngas Application: Experimental Study on Diverse Impurity Effects and Fundamental Modeling of Electrode Kinetics

    … anode materials and examination of various fuel impurity effects on SOFC anode are combined with electrochemical modeling of SOFC cathode kinetics in order to benefit design of direct-coal-syngas SOFC.;Tolerant strategy for SOFC anode against sulfur is studied by using alternative materials which …

    wvu Repository record for Sulfur Tolerant Solid Oxide Fuel Cell for Coal Syngas Application: Experimental Study on Diverse Impurity Effects and Fundamental Modeling of Electrode Kinetics (opens in a new tab)

  7. X-ray scattering and lattice dynamics studies for impurity effects on the para-to-ferroelectric phase transformation behavior in lead titanate and barium titanate

    Doping of impurities may affect the Curie temperature (T$\sb{\rm c})$ associated with the ferroelectric phase transition in terms of lattice harmonicity and anharmonicity including the creation of the defect energy. Its role in the para-to-ferroelectric transition has been investigated on two …

    uiuc Repository record for X-ray scattering and lattice dynamics studies for impurity effects on the para-to-ferroelectric phase transformation behavior in lead titanate and barium titanate (opens in a new tab)

  8. THE IMPURITY EFFECTS AND THE NONSTOICHIOMETRIC DEFECT CHARACTERIZATION OF CERIUM OXIDE(2-X) AND CERIUM(.9)ZIRCONIUM(.1)OXIDE(2-X) IN THE NEAR-STOICHIOMETRIC COMPOSITION RANGE

    The electrical conductivity of CeO(,2-x) was measured in the temperature range 800(DEGREES) - 1000(DEGREES)C and 1-10('-3) atm of oxygen partial pressures. It was found that the results were consistent with a defect model involving doubly ionized oxygen vacancies arising from both nonstoichiometry …

    marquette Repository record for THE IMPURITY EFFECTS AND THE NONSTOICHIOMETRIC DEFECT CHARACTERIZATION OF CERIUM OXIDE(2-X) AND CERIUM(.9)ZIRCONIUM(.1)OXIDE(2-X) IN THE NEAR-STOICHIOMETRIC COMPOSITION RANGE (opens in a new tab)

  9. The Impurity Effects and the Nonstoichiometric Defect Characterization of CeO<sub>2-x</sub> and Ce<sub>.9</sub>Zr<sub>.1</sub>O<sub>2-x</sub> in the Near-stoichiometric Composition Range

    The electrical conductivity of CeO(,2-x) was measured in the temperature range 800(DEGREES) - 1000(DEGREES)C and 1-10('-3) atm of oxygen partial pressures. It was found that the results were consistent with a defect model involving doubly ionized oxygen vacancies arising from both nonstoichiometry …

    marquette Repository record for The Impurity Effects and the Nonstoichiometric Defect Characterization of CeO<sub>2-x</sub> and Ce<sub>.9</sub>Zr<sub>.1</sub>O<sub>2-x</sub> in the Near-stoichiometric Composition Range (opens in a new tab)

  10. Many-Body Effects in Novel Nanostructures : Optical and Transport Properties

    This work explores many-body effects in novel nanostructures specifically on transport and optical properties. As an introduction, we investigate these properties by employing the Drude model in the classical regime. In quantum regime, these properties are related to the density-density response …

    concordia Download PDF for Many-Body Effects in Novel Nanostructures : Optical and Transport Properties (opens in a new tab)

  11. Surface freezing at the alkane water interface under acoustic levitation

    … impact of impurities, potential surface-induced effects, and the role of the evaporation of the water droplet while acoustically levitated, on this phenomenon. Three purity levels of hexadecane were tested to assess impurity effects on freezing inhibition. Results suggest that impurities prevent …

    chalmers Repository record for Surface freezing at the alkane water interface under acoustic levitation (opens in a new tab)

  12. Understanding the optoelectronic properties of lead-tin perovskites through experiment and simulation

    … key challenges related to material degradation, impurity effects, and the interpretation of photoluminescence measurements, through the integration of experimental characterization with theoretical modelling.<br><br>In Chapter 4, the effects of several degradation mechanisms on the performance of …

    oxford Repository record for Understanding the optoelectronic properties of lead-tin perovskites through experiment and simulation (opens in a new tab)

  13. The role of surface energy and plasticity in determining the fracture toughness of tantalum and tungsten

    … (W) and tantalum (Ta) by examining their effects on ideal cleavage energy and fracture toughness. Using density functional theory (DFT), we calculated the reduction in ideal cleavage energy for both the {100} and {110} crystallographic planes of W and Ta due to various impurities, with He, …

    colostate Repository record for The role of surface energy and plasticity in determining the fracture toughness of tantalum and tungsten (opens in a new tab)

  14. Nuclear spin relaxation of He_ in liquid He_-He_

    … of He3 decreases. The latter implies that impurity effects become more important the lower the He3 concentration is. A model based on bulk and wall impurities was used to explain the results. This model was also used to compute the diffusion coefficient for He3 in the three mixtures. The …

    rice Repository record for Nuclear spin relaxation of He_ in liquid He_-He_ (opens in a new tab)

  15. Thermophysical properties of nominally phase pure boride ceramics

    … to be measured without being masked by Hf impurity effects. Additions of Ti and Y reduced thermal conductivity by 20% and 30% respectively. The melting temperatures of two different types of ZrB2 were also studied. A commercially available grade of ZrB2 (~ 1.75 at% Hf) had a melting …

    must-thes Repository record for Thermophysical properties of nominally phase pure boride ceramics (opens in a new tab)

  16. Effects of impurities on crystal growth processes

    … develop a systematic approach to predict impurity effects on crystal habit and polymorphism. In this study, glycine, a simple amino acid, was used as the primary solute. The higher homologous amino acids were added in trace amounts to glycine solutions in order to simulate the presence of …

    nus Repository record for Effects of impurities on crystal growth processes (opens in a new tab) Download file for Effects of impurities on crystal growth processes (opens in a new tab)

  17. Effects on Hydrogen Adsorption and Activation on Platinum in a Fuel Cell Catalyst

    … cell performance. To counter these poisoning effects, fuel cell manufacturers are forced to use higher Pt loadings, which dramatically increases material costs and prevents the successful commercialization of the technology. The focus of the present research is the investigation of the …

    clemson Repository record for Effects on Hydrogen Adsorption and Activation on Platinum in a Fuel Cell Catalyst (opens in a new tab)

  18. The magnetic susceptibility of scandium-hydrogen and lutetium-hydrogen solid solution alloys from 2-300 K

    … at Ames Laboratory are enhanced as the impurity level of iron in scandium decreases. Correlations of the low-temperature heat capacity data with the magnetic susceptibility results suggest the purity is now good enough to measure properties intrinsic to scandium, and are not due to …

    iastate Repository record for The magnetic susceptibility of scandium-hydrogen and lutetium-hydrogen solid solution alloys from 2-300 K (opens in a new tab)

Page 1 of 2