Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"In plane loads"”.
-
Probability-based stability analysis of a laminated composite plate under combined in-plane loads
The probabilistic stability of a laminated composite plate is investigated. Three different models are considered in this study, namely, the classical laminated plate theory, a first-order shear deformation theory, and a higher-order shear deformation theory. The probabilistic characteristics, such …
-
Free vibration and buckling analysis of thin rectangular plates with classical boundary conditions under unilateral in-plane loads.
Interest in the free vibration of thin rectangular plates has emerged due to the rapid growth in computer technology. Delicate electronic components mounted on circuit boards may be placed in environments under dynamic loadings. The designer may need to control the natural frequency or mode shape …
-
Nominal Shear Strength of Cold-formed Steel Shear Walls Using Osb Sheathing
In the cold-formed steel construction, the oriented strand board is a common material for shear wall sheathing. an OSB is made by using wood chips as raw materials that undergo high temperature pressing to create a multi-larger structure material. Due to the OSB having a high strength in shear, it …
-
Nonlinear long-term behavior of high-strength concrete wall panels
This thesis investigates the time-dependent behaviour of slender reinforced high-strength concrete (HSC) panels, with particular emphasis on the combined effects of creep and shrinkage on the buckling capacity and its degradation with time. The short-term response of one-way HSC panels is studied …
-
Structural analysis of geodesically stiffened composite panels with variable stiffener distribution
… analysis approach is developed to predict buckling load of geodesically stiffened composite panels under in-plane loads. The analysis procedure accounts for the contribution of the in-plane extensional and out-of-plane bending stiffnesses of the stiffeners through the use of Lagrange multipliers …
-
System identification of adaptive composites
… composites are non-homogeneous materials having high strength fibers embedded in a polymeric or metal matrix, and having directional properties. Shape Memory Alloys (SMAs) such as Nitinol can be embedded in composites for active control of structures. Since the micromechanics of composites in …
-
Discrete Damage Mechanics Applied To Transverse Matrix Cracking
… (CTE) reduction due to transverse matrix cracking in laminated composite structures is implemented as a user subroutine in Abaqus. The assumptions of the model are a symmetric laminate under in-plane loads and linear distribution of intralaminar shear stresses. The model was latter validated …
-
Structural analysis and optimum design of geodesically stiffened composite panels
… approach is developed to predict the buckling of geodesically stiffened composite panels under in-plane loads. This procedure accounts for the discrete flexural contribution of each stiffener through the use of Lagrange multipliers in an energy method solution. An analysis is also …
-
DYNAMIC BEHAVIORS OF BEAM AND PLATE STRUCTURES SUBJECTED TO VARIOUS COMPLICATING EFFECTS USING ARTIFICIAL SPRING MODELS
… plate structures subjected to various complicating effects using artificial spring models, is divided into six chapters. Chapters 1 and 6 are the introduction and conclusion respectively. Formulations and numerical results of the various case studies are presented and discussed in chapters 2 to …
-
A Finite Element for the Three-Dimensional Deformation of a Circular Ring of Arbitrary Cross Section
A two-node finite element for relatively compact, solid curved beams is derived. A node is located at the centroid of each end of the beam, and each node has six degrees of freedom, consisting of three translations and three rotations in mutually perpendicular directions. The element stiffness …
-
Effects of rotational elastic edge supports on buckling and free vibration of thin rectangular plates.
Rectangular plates are found in most structures of modern industry. Their two-dimensional structural action results in lighter structures and therefore offers numerous economic advantages. Recently interest in rectangular plates increased due to rapid growth in electronic technology where …
-
Seismic Assessment of Infilled Steel Frames
… seismic behavior of steel frames with masonry infill panels. Initially, a detailed nonlinear finite element model, recently proposed for RC frames, is extended here to simulate the response of infilled steel frames tested under in-plane loads in three previous studies. The modeling scheme …
-
Strength of slender reinforced concrete walls
This study is concerned with the behaviour of single span slender reinforced concrete members with depth/span ratios equal to and larger than 1. A series-of deep panels with depth/span ratios between I and 4 was studied experimentally. These elements were tested under third point loads at the top …
-
Seismic modeling of structures with steel deck reinforced concrete diaphragms
… of a hysteretic model for steel deck reinforced concrete (SDRC) diaphragms subjected to seismic loads was performed as part of the overall research diaphragm program conducted at Iowa State University (ISU). This work focused on the development of a hysteretic model with nonlinear, …
-
MEMS Capacitive Strain Sensing Elements for Integrated Total Knee Arthroplasty Prosthesis Monitoring
<p>Measuring the <em>in vivo</em> load state of Total Knee Arthroplasty (TKA) components is required to understand the structural environment and wear characteristics of the devices. The ability to acquire this information gives tremendous insight into the mechanics of the joint replacement …
-
Performance evaluation of hollow-core slab reinforcement bar connections to masonry walls: Western Canada practice
Reinforcing steel bars are essential for connecting hollow-core slabs (HCS) to supporting structures, ensuring structural integrity and resistance to lateral in-plane loads. In Canada, 10M reinforcing bars are widely used to anchor HCS to supports. However, North American design provisions lack …
-
Buckling Analysis and Optimum Design of Multidirectionally Stiffened Composite Curved Panel
Continuous filament grid-stiffened structure is a stiffening concept that combines structural efficiency and damage tolerance. However, buckle resistant design optimization of such structures using a finite element method is expensive and time consuming due to the number of design parameters that …
Page 1 of 2