Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 96 for “"In situ tests"”.

  1. Prediction of embankment performance using in-situ tests

    In-situ piezocone, flat dilatometer, and screw plate tests were carried out adjacent to the site of several large earth embankments, founded on a deep deposit of compressible soil. Settlement records since construction were available for two of the embankments. Geotechnical parameters were not back …

    ubc Repository record for Prediction of embankment performance using in-situ tests (opens in a new tab) Download PDF for Prediction of embankment performance using in-situ tests (opens in a new tab)

  2. Statistical characterization of soil profiles using in situ tests

    … the site characterization capabilities of insitu test data with special emphasis on the cone penetrometer test have been proposed and presented. Two methods to identify different soil layers from a profile have been described. One of these procedures is based on the effects of the …

    ubc Repository record for Statistical characterization of soil profiles using in situ tests (opens in a new tab) Download PDF for Statistical characterization of soil profiles using in situ tests (opens in a new tab)

  3. In-situ tests of the hydraulic performance of grout borehole seals.

    Three tests are proposed for determining the hydraulic properties of in-situ borehole seals. Two consist of monitoring the rate of injection of water at constant pressure into an injection zone at one end of a seal and monitoring the collection rate or rate of flow out of a free-draining collection …

    arizona-thes Repository record for In-situ tests of the hydraulic performance of grout borehole seals. (opens in a new tab)

  4. Investigation of the liquefaction of a soil profile using in situ tests

    Liquefaction is defined here as a sudden reduction in soil strength and stiffness resulting from a rapid increase in pore pressure. It is a behaviour typically associated with extensive deposits of fine granular soils. The mechanisms of liquefaction are identified as the generation and dissipation …

    city-london Download PDF for Investigation of the liquefaction of a soil profile using in situ tests (opens in a new tab)

  5. Use of In-Situ Tests to identify Soil Behavior Type and Liquefaction Susceptibility of SCCP Soils

    … Penetration Test (SPT) have been used as in-situ tools to assess the liquefaction potential of soils. Given the importance of evaluating liquefaction potential in the South Carolina Coastal Plain (SCCP), research was conducted to study the soil behavior of soils prone to liquefaction, …

    south-carolina Repository record for Use of In-Situ Tests to identify Soil Behavior Type and Liquefaction Susceptibility of SCCP Soils (opens in a new tab)

  6. Relationships Between In-Situ Tests and Soil Cyclic Strength for Earthquake Hazard Characterization in the Pacific Northwest

    Strong earthquake shaking is a natural hazard threat in the Pacific Northwest. Soil failure due to strong earthquake shaking -- known as cyclic soil failure or liquefaction -- is expected to cause large ground deformations and damage to roads, bridges, and other civil infrastructure. Cyclic soil …

    portland-state Repository record for Relationships Between In-Situ Tests and Soil Cyclic Strength for Earthquake Hazard Characterization in the Pacific Northwest (opens in a new tab)

  7. In-situ tests of sound-bubble-strobe light barrier technologies to prevent the range expansions of Asian carp

    … molitrix) carp (collectively, Asian carp) have invaded the Mississippi River Basin and have successfully established populations in the Illinois River. Correlative studies have suggested that Asian carp in the Illinois River have negatively influenced native planktivorous fishes and they now …

    uiuc Repository record for In-situ tests of sound-bubble-strobe light barrier technologies to prevent the range expansions of Asian carp (opens in a new tab)

  8. In Situ Testing and its Application to Foundation Analysis in Fine-Grained Unsaturated Soils

    The in situ test is an important part of a geotechnical engineer’s arsenal. Currently, there are no established methods for interpreting results of in situ tests in unsaturated soils. The difficulty in interpreting in situ tests in unsaturated soil comes from the presence of suction, which is often …

    oklahoma-thes Repository record for In Situ Testing and its Application to Foundation Analysis in Fine-Grained Unsaturated Soils (opens in a new tab) Restricted access

  9. Geotechnical Surrogates for Sediment Shear Behavior in Southern Nevada

    … deep foundations, particularly drilled shafts, in the Las Vegas Valley (LVV) may be overly conservative due to the challenges in characterizing strong but difficult-to-sample sediment strata, such as dense gravel, heavily cemented sediments, and mixed materials, which occur commonly in the LVV. …

    unlv Repository record for Geotechnical Surrogates for Sediment Shear Behavior in Southern Nevada (opens in a new tab) Download PDF for Geotechnical Surrogates for Sediment Shear Behavior in Southern Nevada (opens in a new tab)

  10. Load and resistance factor design of drilled shafts in shale using SPT and TCP measurements

    … design methods for design of drilled shafts in shale and other weak rock. These methods are generally based on Load and Resistance Factor Design (LRFD) methods that relate uniaxial compressive strength measurements of rock cores to the side and tip resistance for drilled shafts. However, …

    missouri Repository record for Load and resistance factor design of drilled shafts in shale using SPT and TCP measurements (opens in a new tab)

  11. Ensaios, "in situ", de resistência ao arrancamento de placas horizontais reduzidas

    This report presents the results of a set of in situ tests with small depth, circular plates, buried at shallow embedment, searching for the influence of the diameter and dept of the plate and diameter of the pit on the uplift load carrying capacity. It was also aimed to test the feasibility of …

    brazil-uerj Repository record for Ensaios, "in situ", de resistência ao arrancamento de placas horizontais reduzidas (opens in a new tab)

  12. Performance assessment of stabilized pavement subgrades

    … Laboratory test results of a typical mix design including soil strength and stiffness measurements are usually well documented in the short term. However, the long-term performance data of stabilized pavement are lack and desired for further development of this technology.</p> <p>In order to …

    iastate Repository record for Performance assessment of stabilized pavement subgrades (opens in a new tab)

  13. Dilatancy characterization of sands using the resistivity cone penetration test

    The determination of in situ dilatancy in sands has been a difficult and elusive objective in site investigations. Difficulty with sampling, as well as problems with extrapolating laboratory results to field performance have caused geotechnical engineers to place increased reliance on in situ …

    ubc Repository record for Dilatancy characterization of sands using the resistivity cone penetration test (opens in a new tab) Download PDF for Dilatancy characterization of sands using the resistivity cone penetration test (opens in a new tab)

  14. In situ determination of dynamic soil properties under an excited surface foundation

    The dynamic properties of soil are normally inferred from laboratory tests on collected samples or from empirical relations. The soil properties measured in the field can be very different from those predicted from laboratory tests. It is very difficult to determine directly in the field the …

    tamu Repository record for In situ determination of dynamic soil properties under an excited surface foundation (opens in a new tab)

  15. Characteristics of undrained shear strength in shallow soils in deep water Gulf of Mexico

    Shallow foundations are used when designing subsea structures on the seafloor of deep water Gulf of Mexico. In order to design these subsea shallow foundations it is important to understand the behavior of the undrained shear strength of the shallow soils (i.e. upper ten to twenty feet of soil). …

    texas Repository record for Characteristics of undrained shear strength in shallow soils in deep water Gulf of Mexico (opens in a new tab)

  16. Microstructural Influence on Deformation, Degradation and Fracture of Ductile Materials

    The overarching goal of this dissertation is to quantify the microstructural influence on deformation, degradation, and fracture of some of the most technologically sought after advanced structural materials. In the first part of this work, the mechanical response of a variety of advanced high …

    tamu Repository record for Microstructural Influence on Deformation, Degradation and Fracture of Ductile Materials (opens in a new tab)

  17. Determining The Effectiveness Of Rock Mass Classification Schemes When Used To Derive Empirical Predictions For Rock Mass Deformation Modulus

    … parameter for any permanent excavation and infrastructure project that requires limited or controlled deformations to ensure performance of permanent support systems and of foundations. Despite being a key parameter, the optimal methods for determining Erm is still debated. These methods can …

    mississippi Repository record for Determining The Effectiveness Of Rock Mass Classification Schemes When Used To Derive Empirical Predictions For Rock Mass Deformation Modulus (opens in a new tab)

  18. Nanolaminate coatings to improve long-term stability of plasmonic structures in physiological environments

    … metal nano-structures to concentrate light into deep-subwavelength volumes has propelled their use in a vast array of nanophotonics technologies and research endeavors. They are used in sensing, super-resolution imaging, SPP lithography, SPP assisted absorption, SPP-based antennas, light …

    vt Repository record for Nanolaminate coatings to improve long-term stability of plasmonic structures in physiological environments (opens in a new tab)

  19. Prototype of a continental shelf tide gauge

    Specifications and design for a self-contained tide gauge are presented. The gauge is suitable for immersion to a depth of 1000 meters for a period of one year with a five minute sample rate. A Vibrotron absolute pressure transducer is the sensing element with pressure measured to an equivalent …

    ubc Repository record for Prototype of a continental shelf tide gauge (opens in a new tab) Download PDF for Prototype of a continental shelf tide gauge (opens in a new tab)

Page 1 of 5