Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"In-Cylinder Temperature"”.
-
IN-CYLINDER CONDITION ESTIMATION AND CONTROL APPLICATIONS ON DIESEL ENGINE COMBUSTION
Advanced combustion modes offer promising solutions for both emission reduction and efficiency improvement. The lower local equivalence ratio and lower peak temperature characterized by the advanced combustion mode significantly reduce the generation of the engine-out emissions (especially the soot …
-
Investigation of the Difference in Cool Flame Characteristics between Petroleum Diesel and Soybean Biodiesel Operating in Low Temperature Combustion Mode
One of the promising solutions to rising emission standards is the in-cylinder emission reduction, through low temperature combustion. Low temperature combustion defeats conventional soot-NOx trade off by simultaneous reduction of both emissions by controlling the in-cylinder temperature below the …
-
THERMAL CHARACTERIZATION OF COMBUSTION CHAMBER COMPONENTS IN A GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) ENGINE
… is a PhD dissertation proposal to study the in-cylinder temperature and heat flux distributions within a gasoline turbocharged direct injection (GTDI) engine. Recent regulations requiring automotive manufacturers to increase the fuel efficiency of their vehicles has led to great technological …
-
Characterization of fuel injection and mixing process in a GDI engine using CFD
In this thesis, computational fluid dynamics(CFD) simulations were carried on a gasoline direct injection (GDI) engine to study the thermal behavior, Piston fuel film mass accumulation, Heat release rate and emissions with different injection timings, piston temperatures and boundary temperatures. …
-
Experimental measurements of n-heptane liquid length and spray cone angle for early direct-injection low-temperature conditions relevant to diesel engines in an optically accessible constant-pressure flow vessel
The prevalence of direct-injection fuel sprays in engines and power-generation systems and, in particular, the emergencies of advanced combustion strategies that involve unconventional conditions have made detailed study of fuel sprays necessary. In some of these strategies, fuel is injected early …
-
Experimental and Analytical Techniques for Evaluating the Impact of Thermal Barrier Coatings on Low Temperature Combustion
… along with lean charge and low combustion temperatures, generally act to increase thermal efficiency relative to competing spark and/or compression ignition strategies. However, HCCI's extreme sensitivity to in-cylinder thermal conditions, place limits on practical implementation. Thus, at …
-
The Potential of Using Natural Gas in HCCI Engines: Results from Zero- and Multi-dimensional Simulations
… of petroleum based fuels and the corresponding concerns of national energy security issues, natural gas as an alternative fuel in IC engine applications has become an attractive option. Natural gas requires minimum mixture preparation, and is chemically stable, both of which make it a …
-
Simulation and analysis of an 18L natural-gas engine with a focus on cylinder deactivation and exhaust pressure dynamics
A GT-Power model of a Waukesha VGF-18 engine was created to investigate engine performance and pressure wave dynamics in the exhaust system of an 18L natural-gas engine. Exhaust pressure plays a large role in engine dynamics as it affects in-cylinder temperature, pressure, power output, emissions, …
-
NOₓ measurement and characterization in a gaseous fueled high-pressure direct-injection engine
Internal combustion engines (ICE) produce emissions that are harmful to the environment and human health. Strict governmental regulations put in place to reduce these harmful emissions have driven engine advancements such as high-pressure direct-injection (HPDI) of natural gas (NG) technology …
-
The effect of hydrogen substitution on the real-world CO₂, NOx, and PM emissions of a heavy-duty diesel truck
… diesel consumption and CO₂ output of diesel engines. This thesis investigates its effect on the real-world, on-road emissions of CO₂, NOx and particulate matter (PM) from a heavy-duty diesel truck. Testing was conducted on a Class 8 truck fitted with a 13 L common-rail direct-injection (CDI) …
-
Comparison of Ultra-Low Sulfur Diesel and Biodiesel Combustion Characteristics in the Partially Premixed Charge Compression Ignition Regime
Compression Ignition (CI) engines offer comparatively higher thermal efficiency. However, rising concerns over the increase in harmful emissions generated by CI engines such as nitrogen oxides (NOx) and particulate matter (PM) need to be addressed. Low temperature combustion through Partially …
-
Modelling of combustion, fuel consumption and emission formation for design, calibration and control of diesel engines
… current PhD thesis aims to describe the work during three year PhD career in a detailed and comprehensive way. As indicated by the title of thesis, the work has been concentrated on the engine modelling of combustion, fuel consumption and pollutant emission with different approaches, and the …
-
Turbocharged HCCI Engine, Improving Efficiency and Operating Range
Increasing fuel prices and environmental concern drives the research and development for the internal combustion engine. Homogeneous Charge Compression Ignition (HCCI) is a promising combustion concept with high fuel efficiency and low emissions. The auto-ignition in HCCI combustion has no flame …
-
Reduction of NOx Emissions in a Single Cylinder Diesel Engine Using SNCR with In-Cylinder Injection of Aqueous Urea
The subject of this study is the effect of in-cylinder selective non-catalytic reduction (SNCR) of NOx emissions in diesel exhaust gas by means of direct injection of aqueous urea ((NH2)2CO) into the combustion chamber. A single cylinder diesel test engine was modified to accept an electronically …
-
Large Eddy Simulation of Turbulent Reactive Flows under HCCI Engine Conditions
Large Eddy Simulation (LES) modeling is developed to study homogeneous charge compression ignition (HCCI) combustion under different engine operation and mixture conditions, including real engine configurations and generic test cases. A previously developed HCCI model has been validated by …
-
A Study of Greenhouse Gas Emissions and Performance of an Internal Combustion Engine Operating on Landfill Gas Blends as Fuel
… (LFG) is an abundant resource naturally occurring from the decomposition of municipal solid waste. It can be generated in U.S. landfills at a rate of 24.2 to 59.1 GNm3 per year.1 LFG presents both a problem and solution with respect to global warming. Composed of carbon dioxide (CO2, 30-40%) …
-
Performance characteristics of ammonia engines using direct injection strategies
<p>In this study performance characteristics of ammonia engines using direct injection strategies are investigated. Ammonia is a carbon-free fuel, and thus its combustion does not produce carbon dioxide, a critical greenhouse gas. Ammonia can be produced by using renewable energy sources (e.g., …
-
Concentration and Size Distributions of Nanoparticle Emissions during Low Temperature Combustion using Fuels for Advanced Combustion Engines (FACE)
Due to tightening emission legislations, both within the US and Europe, including concerns regarding greenhouse gases, next-generation combustion strategies for internal combustion (IC) diesel engines that simultaneously reduce exhaust emissions while improving thermal efficiency have drawn …
-
MODEL-BASED ENGINE-OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK-IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED
The in-cylinder trapped air, residual gas, and temperature are important dynamic parameters in Gasoline Direct Injection (GDI) Spark Ignition (SI) engines for fuel and combustion control. However, their real-time prediction for transient engine operations is complicated, especially when concerning …
Page 1 of 2