Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"In-Place Density"”.
-
Cold In-Place Recycling Mix Design, In-Place Density, and Long-Term Performance in Nevada
… a performance based mix design method for cold in-place recycling (CIR), b) develop a practical method for CIR in-place density determination during construction, and c) conduct long-term performance and benefit-cost analysis of CIR pavements throughout Nevada over the period of 2000-2015.Four …
-
Evaluation of the relative field permeability of Superpave in Tennessee
<p>This paper presents the results of a study initiated to evaluate the relative permeability of Superpave<sup>TM</sup>-designed mixes placed on the roadway in Tennessee The study consisted of using a tiered field permeameter developed by the National Center for Asphalt Technology (NCAT) Four …
-
Evaluation of the field permeability of HMA using the NCAT tiered permeameter
<p>The increasing levels of traffic and vehicle wheel loads that are continuously encountered by roadways has demanded the combined effort of experts in the Hot Mix Asphalt (HMA) industry to better accommodate the techniques used in designing and evaluating HMA roadways. The combined effort of …
-
A Study on the Calibration and Accuracy of the One-Step TDR Method
Traditional in-situ soil compaction monitoring methods are often limited in their application, thus quality control of compacted fills and roadway embankments remains a challenging problem. As a result, new methods are being developed to more accurately measure in-situ compaction parameters. Time …
-
Comparison of a modified and traditional rapid infiltration basin for treatment and control of nutrients in wastewater effluent
Rapid infiltration basins (RIB) have been historically used in Florida for groundwater recharge, effluent disposal, or a combination of both. However, this technique has proven ineffective in providing nitrogen control unless the RIB is modified in some manner. In this study, a traditional RIB was …
-
A Case Study for Developing Specification Limits for Hot-Mix Asphalt and the Impact on Pay Factors
Specification limits utilized in percent within limits (PWL) specifications are developed by highway agencies, and used to determine the percent of hot-mix asphalt “Lot” within specified limits, and used later to make payments to contractors. Development of specification limits must be based on the …
-
Using Cost, Mix Design, Construction, and Performance Data to Inform Hot Mix Asphalt Pavement Policy and Standards
This dissertation integrates and assesses in-service hot mix asphalt pavement data from several typically available but disconnected data sources to inform pavement policy and specification development. This in-service pavement data approach captures connected pavement data from different stages of …
-
Advancing FAA Asphalt Mix Design: Evaluation of Rutting Mechanical Tests for Balanced Mix Design
… (AC) mix design methods have been progressing throughout the last century with the aim of reaching AC mixtures at a superior field performance level. The balanced mix design (BMD) is the latest advancement in mix design focusing on laboratory mechanical tests correlated to field …
-
Contribution to the evaluation of the compaction characteristics of asphalt mixtures
… as one of the most critical factors affecting the pavement behavior, providing all desirable mixture design characteristics are met. This poses a challenge the laboratory compaction to simulate the field compaction, so that a reliable assessment of the on-site asphalt mixture’s …