Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"In-Situ Composite"”.

  1. Investigation of Electrotribological and Arc Erosion Behavior of Cu-15vol.%Cr in situ Composite

    … and arc erosion behavior of Cu-15vol.%Cr in situ composite was investigated in terms of coefficient of friction, interfacial resistance, bulk temperature, and wear rate as a function of normal pressure, sliding speed, and electrical current. Microstructural change due to electrical sliding …

    eiu Repository record for Investigation of Electrotribological and Arc Erosion Behavior of Cu-15vol.%Cr in situ Composite (opens in a new tab)

  2. Dynamic Testing of In-Situ Composite Floors and Evaluation of Vibration Serviceability Using the Finite Element Method

    The presented research examined three areas: best practices in high quality dynamic testing of in-situ floor systems, extensive dynamic testing of three bare (non-fit out) in-situ multi-bay steel composite floors to estimate their dynamic parameters/response and to identify trends in dynamic …

    vt Repository record for Dynamic Testing of In-Situ Composite Floors and Evaluation of Vibration Serviceability Using the Finite Element Method (opens in a new tab)

  3. Design of Sintered, Tough, Oxide Laminate and Fibrous Monolithic Composites

    Tough, oxide, laminated and fibrous monolithic composites were fabricated by using tape casting and co-extrusion technique, respectively. Mullite (3Al 2O3·2SiO2), alumina (Al2O 3), 50 vol% alumina · 50 vol% YAG (yttrium aluminum garnet, Y 3Al5O12) in situ composite, 50 vol% alumina …

    uiuc Repository record for Design of Sintered, Tough, Oxide Laminate and Fibrous Monolithic Composites (opens in a new tab)

  4. The processing of microcomposites based on polypropylene and two thermotropic liquid crystalline polymers in injection molding, sheet extrusion, and extrusion blow molding

    This work is concerned with the processing of pellets of polypropylene (PP) containing pregenerated microfibrils of thermotropic liquid crystal polymers (TLCPs), referred to as microcomposites. The processing methods used are injection molding, sheet extrusion, and extrusion blow molding. The TLCPs …

    vt Repository record for The processing of microcomposites based on polypropylene and two thermotropic liquid crystalline polymers in injection molding, sheet extrusion, and extrusion blow molding (opens in a new tab)

  5. Deformation processed IMC-reinforced metal matrix composites

    The feasibility of utilizing TiB₂-reinforced near-gamma TiAl intermetallic matrix composites (IMCs) as a reinforcing entity within a commercially pure Ti matrix was investigated. IMCs are "ceramic-like" at ambient to moderate temperatures, and “metallic-like" in their deformation behavior above …

    vt Repository record for Deformation processed IMC-reinforced metal matrix composites (opens in a new tab)

  6. Morphological modification and fracture toughness of the niobium aluminide eutectic

    <p>The processing of alloys of the niobium aluminide system has been investigated to determine their applicability to elevated temperature service. Several alloys have been examined including the eutectic of Nb<sub>2</sub>Al and NbAl<sub>3</sub>. This is a degenerate, irregular eutectic whose …

    ut-knoxville Repository record for Morphological modification and fracture toughness of the niobium aluminide eutectic (opens in a new tab)

  7. Synthesis and characterization of in situ whisker-reinforced glass-ceramics

    The effects of in situ Ti0₂ whisker reinforcement on mechanical and thermal properties of glass-ceramics in the Li₂O-Al₂0₃-P₂0₆-Si0₂ system were investigated. When Ti0₂ whiskers, having an average aspect ratio of 28, are precipitated from the glass-ceramic matrix, …

    vt Repository record for Synthesis and characterization of in situ whisker-reinforced glass-ceramics (opens in a new tab)

  8. Fundamental aspects of the tribological behavior of poly(ether-ether-ketone)-based in-situ composites at elevated temperatures

    In-situ composites based on self-reinforcing blends of engineering thermoplastics and thermotropic liquid crystalline polymers (TLCPs) are recently developed, innovative polymeric materials, which have been reported to exhibit outstanding property profiles. These profiles include superior …

    vt Repository record for Fundamental aspects of the tribological behavior of poly(ether-ether-ketone)-based in-situ composites at elevated temperatures (opens in a new tab)

  9. The role of internal stress in strengthening heavily codeformed two-phase materials

    … two-phase materials can show anomalous increases in strength as a function of the level of deformation. The strength of these materials can vary considerably from what is predicted by the rule of mixtures. Understanding the mechanisms responsible for the strengthening of these materials …

    ubc Repository record for The role of internal stress in strengthening heavily codeformed two-phase materials (opens in a new tab) Download PDF for The role of internal stress in strengthening heavily codeformed two-phase materials (opens in a new tab)

  10. Cold Gas Dynamic Spray Additive Manufacturing of Moisture-Electric Energy Transformation Devices

    The ever-growing Internet of Things is promoting more data acquisition, data exchange and fewer human interactions, engendering a higher demand for sensors and therefore power. While in most cases it is possible to directly connect these sensors to the power grid, it will not always be feasible …

    ottawa-retro Repository record for Cold Gas Dynamic Spray Additive Manufacturing of Moisture-Electric Energy Transformation Devices (opens in a new tab)

  11. Reaction Synthesis of Titanium Aluminide / Titanium Diboride in-Situ Composites

    Reaction synthesis is a processing technique where the thermal activation energy needed to form a compound is provided by the exothermic heat of formation of the thermodynamically stable product. This type of synthesis has been used to form a variety of ceramics, intermetallics, and in-situ …

    vt Repository record for Reaction Synthesis of Titanium Aluminide / Titanium Diboride in-Situ Composites (opens in a new tab)

  12. In-situ Synthesis of Piezoelectric-Reinforced Metal Matrix Composites

    The in-situ synthesis of piezoelectric-reinforced metal matrix composites has been attempted with a variety of target matrix and reinforcement materials using reaction synthesis and high energy ball milling. Zinc oxide (ZnO) and barium titanate (BaTiO₃) have been successfully synthesized within …

    vt Repository record for In-situ Synthesis of Piezoelectric-Reinforced Metal Matrix Composites (opens in a new tab)

  13. Static pullout behaviour of soil nails in residual soil

    This study investigates the axial soil nail soil-interaction of bonded passive soil nails in residual soils under quasi-static pullout force. It seeks to address three issues involved in the prediction of pullout response and distribution of axial forces along the inclusion. The three issues are; …

    nus Repository record for Static pullout behaviour of soil nails in residual soil (opens in a new tab) Download file for Static pullout behaviour of soil nails in residual soil (opens in a new tab)

  14. An investigation of the effects of shearfree deformation and the role of miscibility on the structure and properties of in situ thermoplastic composites

    Injection Molding The effects of partial miscibility on the mechanical properties and morphology of thermotropic liquid crystalline polymer blends were investigated in this part of the work. Blends of an immiscible (Vectra A900) and partially miscible (HX1000) thermotropic liquid crystalline …

    vt Repository record for An investigation of the effects of shearfree deformation and the role of miscibility on the structure and properties of in situ thermoplastic composites (opens in a new tab)

  15. In situ characterization of fiber-matrix interface debonding via full-field measurements

    … mechanical and failure properties of fiber-reinforced composites depend strongly on the properties of the fiber-matrix interface. For example, transverse cracking behavior and interlaminar shear strength of composites can be highly sensitive to the characteristics of the fiber-matrix …

    rowan Repository record for In situ characterization of fiber-matrix interface debonding via full-field measurements (opens in a new tab)