Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"In-Use Emissions"”.

  1. Characterization of in-use emissions from marine engines

    Recently, exhaust emissions from marine engines have become a cause of growing concern. Emission reduction technologies applicable to marine engines need to be developed and tested so that the emission regulations can be met. A review of emission reduction technologies applicable for marine engines …

    wvu Repository record for Characterization of in-use emissions from marine engines (opens in a new tab)

  2. In-use emissions from heavy-duty diesel vehicles

    Includes bibliographical references.

    colo-mines Repository record for In-use emissions from heavy-duty diesel vehicles (opens in a new tab)

  3. Characterization of in-use emissions from on-highway heavy-duty diesel engines

    … GVWR of 80,000 lbs were tested on different driving routes and in-use brake-specific emissions of NOx and CO2 data were collected using the West Virginia University's Mobile Emissions Measurement System (MEMS). An uncertainty analysis was performed on the MEMS and it was determined the maximum …

    wvu Repository record for Characterization of in-use emissions from on-highway heavy-duty diesel engines (opens in a new tab)

  4. Comparison of In-use Emissions Measurement using PEMS, FTIR and Full-scale Dilution Method

    With an increasing focus on implementing low emission heavy duty (HD) vehicles in the booming freight transportation sector, engine manufacturers have started prompting studies on addressing the technical challenges of measuring these virtually near zero levels of gaseous and particulate emissions. …

    wvu Repository record for Comparison of In-use Emissions Measurement using PEMS, FTIR and Full-scale Dilution Method (opens in a new tab)

  5. Comparison of a Work-Based Window Method to NTE Method for Reporting In-Use Emissions

    Heavy-duty on-road diesel engines currently sold in the United States are subjected to emission certification over the Federal Test Procedure and Supplemental Emissions Test in an engine test cell as well as in-use testing in real world environments using portable emissions measurement systems …

    wvu Repository record for Comparison of a Work-Based Window Method to NTE Method for Reporting In-Use Emissions (opens in a new tab)

  6. Evaluation of an air-to-ratio derived exhaust flow rate for in-use emissions testing.

    … air-to-fuel ratio derived exhaust flow rate for emissions testing. The Mobile Emissions Measurement System (MEMS) was developed by West Virginia University to perform in-use emissions testing for several heavy-duty diesel engine manufactures. The MEMS was modified to complete this study. A review …

    wvu Repository record for Evaluation of an air-to-ratio derived exhaust flow rate for in-use emissions testing. (opens in a new tab)

  7. Measurement and characterization of in-use emissions from dual-fuel diesel engines operating on alternative fuels

    … and biodiesel can be substitutes for diesel fuel in compression ignition engines. Dual-fuel combustion technology is an effective way to utilize gaseous fuels ignited by pilot liquid fuels in existing diesel engines with minor modifications. The effects of different fuels on engine emission …

    ubc Repository record for Measurement and characterization of in-use emissions from dual-fuel diesel engines operating on alternative fuels (opens in a new tab) Download PDF for Measurement and characterization of in-use emissions from dual-fuel diesel engines operating on alternative fuels (opens in a new tab)

  8. Development of a test method to measure "in-use" emissions from stationary and portable diesel sources

    A cost-effective, accurate and easy-to-use in-field test method was developed that would allow regulatory bodies, such as the California Air Resources Board (CARB) to determine in-use compliance with emission standards for newly manufactured portable and stationary engines. As emissions measured …

    wvu Repository record for Development of a test method to measure "in-use" emissions from stationary and portable diesel sources (opens in a new tab)

  9. The effects of diesel fuel density on fuel consumption measurements of portable in-use emissions measurement systems.

    Emissions produced by heavy duty diesel engines (HDDE) have been a constant source of pollution to air, water, and soil. In October 1998, a court settlement between the US Environmental Protection Agency, California Air Resources Board, US Department of Justice, and the major diesel engine …

    wvu Repository record for The effects of diesel fuel density on fuel consumption measurements of portable in-use emissions measurement systems. (opens in a new tab)

  10. Effects of Boundary Parameters on the Work-Based Window (WBW) and Not-to-Exceed (NTE) In-Use Emissions Quantification Methods

    Heavy-duty diesel engines are subjected to in-use emissions testing using portable emissions measurement systems (PEMS) to demonstrate compliance with U.S. EPA emissions standards while the vehicle is performing its regular on-road duty-cycle. The current methodology used for analyzing in-use …

    wvu Repository record for Effects of Boundary Parameters on the Work-Based Window (WBW) and Not-to-Exceed (NTE) In-Use Emissions Quantification Methods (opens in a new tab)

  11. Development of an Emissions Monitoring Methodology Using On-Board NOx Sensors and Revision to Current In-Use Emissions Regulatory Protocols

    Measurement of in-use emissions from heavy-duty (HD) vehicles under real-world operation has been widely performed by using portable emissions measurement system (PEMS). PEMS serve as an accurate and lightweight emissions measurement system to evaluate in-use emissions from HD vehicles. However, …

    wvu Repository record for Development of an Emissions Monitoring Methodology Using On-Board NOx Sensors and Revision to Current In-Use Emissions Regulatory Protocols (opens in a new tab)

  12. Study of an error in engine ECU data collected for in-use emissions testing and development and evaluation of a corrective procedure

    … was conducted to evaluate and correct possible inaccuracies in in-use emissions measurements, which were made with Portable Emissions Measurement Systems (PEMS). West Virginia University developed a PEMS termed the Mobile Emissions Measurement System (MEMS) for measurement of heavy duty on road …

    wvu Repository record for Study of an error in engine ECU data collected for in-use emissions testing and development and evaluation of a corrective procedure (opens in a new tab)

  13. Development of a Reference Dataset to Evaluate PEMS Post-Processing Software

    Since the implementation of in-use emissions standards, an outcome of the consent decree between heavy-duty diesel engine manufacturers and the Environmental Protection Agency (EPA), there has been an increased interest in the research and development of portable emissions measurement systems …

    wvu Repository record for Development of a Reference Dataset to Evaluate PEMS Post-Processing Software (opens in a new tab)

  14. Estimates of Emissions from Heavy Duty Diesel Vehicles (HDDV) and Control Strategies Related to Transport Activities Supporting High Volume Hydraulic Fracturing Wells in the Marcellus Shale Formation

    This project examined estimated emission reductions from implementing advanced control technologies in heavy duty diesel engines and to assess potential emission impacts from trucks supporting the High Volume Hydraulic Fracturing (HVHF) industry in Pennsylvania’s portion of the Marcellus Shale …

    rit Repository record for Estimates of Emissions from Heavy Duty Diesel Vehicles (HDDV) and Control Strategies Related to Transport Activities Supporting High Volume Hydraulic Fracturing Wells in the Marcellus Shale Formation (opens in a new tab)

  15. Comparison of emissions measurement between a sensor-based compact emissions meter and a standard PEMS

    The emissions produced by diesel engines are detrimental to human health, and the environment. To reduce these harmful emissions, engine manufacturers have used exhaust after treatment systems. The main objective of these after-treatment systems is to reduce exhaust emissions with minimal impact on …

    wvu Repository record for Comparison of emissions measurement between a sensor-based compact emissions meter and a standard PEMS (opens in a new tab)

  16. Comparison of heavy-duty diesel engine emissions between an on-road route and engine dynamometer simulated on-road cycle

    Heavy-duty diesel engines are known to emit concentrations of harmful compounds of oxides of nitrogen (NOx) and particulate matter (PM). As a means of emissions control, engine dynamometer certification is currently employed. Current certification cycles provide for standardized comparisons, but …

    wvu Repository record for Comparison of heavy-duty diesel engine emissions between an on-road route and engine dynamometer simulated on-road cycle (opens in a new tab)

  17. Development of a micro-dilution tunnel system for in-use, on-board heavy-duty vehicle particulate matter emissions measurement

    A novel portable particulate matter measuring system was designed, developed and qualified. The heavy-duty engine Federal Test Procedure (FTP) requires the use of a full-flow tunnel to measure particulate emissions from diesel fueled engines. However, a full-flow tunnel based constant volume …

    wvu Repository record for Development of a micro-dilution tunnel system for in-use, on-board heavy-duty vehicle particulate matter emissions measurement (opens in a new tab)

  18. A comparative life-cycle analysis of proton exchange membrane fuel cells and internal combustion engines

    The 1989 California legislation requiring that 2% of total vehicle sales in 1998 be zero emission vehicles is the single most important environmental factor that accelerated fuel cell research and development for transportation worldwide. More importantly, the California legislation is increasingly …

    uvic Repository record for A comparative life-cycle analysis of proton exchange membrane fuel cells and internal combustion engines (opens in a new tab)

  19. Characterization of NOx emissions from Light-Duty Diesel Vehicles during off-cycle operation

    Persisting air quality problems in the US have triggered several policy responses that are targeted at lowering the emissions of light-duty vehicles. In addition, the promulgation of Clean Air Act of 1963 and other stringent emissions regulations in the recent times (USEPA Tier 2 Bin 5) to improve …

    wvu Repository record for Characterization of NOx emissions from Light-Duty Diesel Vehicles during off-cycle operation (opens in a new tab)

  20. In-line, Real-time Particulate Matter Sensors for OBD and Exhaust After-treatment System Control Applications

    … quantify particle mass and number concentrations in the exhaust stream of combustion engines during in-use operation is of critical importance for continuously monitoring and diagnosing the particulate matter removal efficiency of modern exhaust gas after-treatment systems. Extensive literature …

    wvu Repository record for In-line, Real-time Particulate Matter Sensors for OBD and Exhaust After-treatment System Control Applications (opens in a new tab)

Page 1 of 2