Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"In-plane Compression"”.

  1. Minimum-weight design of symmetrically laminated composite plates for postbuckling performance under in-plane compression loads

    A postbuckling analysis procedure for simply-supported, symmetrically laminated, rectangular, generally orthotropic plates under uniaxial compression based on a Marguerre-type energy method was developed. The analysis assumes the out-of-plane displacement to be represented by using a truncated …

    vt Repository record for Minimum-weight design of symmetrically laminated composite plates for postbuckling performance under in-plane compression loads (opens in a new tab)

  2. Ultimate Strength of Clamped Steel-Elastomer Sandwich Panels under Combined In-plane Compression and Lateral Pressure

    An efficient interaction formula and a semi-analytical method are developed for calculating the ultimate strength of steel-elastomer sandwich panels under combined in-plane compression and lateral pressure. By using the Galerkin method and extending the semi-analytical method to clamped sandwich …

    vt Repository record for Ultimate Strength of Clamped Steel-Elastomer Sandwich Panels under Combined In-plane Compression and Lateral Pressure (opens in a new tab)

  3. Failure mechanisms of concrete masonry

    The behaviour of concrete masonry under in-plane compression combined with out-of-plane bending was examined both experimentally and analytically. Ungrouted and grouted masonry, both fully bedded or face-shell bedded, were included in the study. It was found that the masonry under the above stated …

    ubc Repository record for Failure mechanisms of concrete masonry (opens in a new tab) Download PDF for Failure mechanisms of concrete masonry (opens in a new tab)

  4. INSTABILITY ANALYSIS IN CYLINDRICAL THIN FILM–COMPLIANT CORE STRUCTURES: NUMERICAL SIMULATIONS AND EFFECTS OF INELASTIC DEFORMATION

    When a thin film bonded to a thick compliant substrate is subject to in-plane compression, wrinkles can develop if the critical state for instability is reached. In various applications the film/substrate system may also take the form of cylindrical fibers, where an axial compressive loading can …

    unm Repository record for INSTABILITY ANALYSIS IN CYLINDRICAL THIN FILM–COMPLIANT CORE STRUCTURES: NUMERICAL SIMULATIONS AND EFFECTS OF INELASTIC DEFORMATION (opens in a new tab)

  5. Buckling of thin-walled FRP plates under compression - A study on effects of boundary conditions and holes in the plate

    Advancement in technologies opens new ways to retrofit conventionally used material in the world. Due to recent rise in importance of sustainability and environmental preservation construction industry is obliged to switch to materials like Fibre reinforced polymers (FRP). Fibre reinforced polymer …

    chalmers Repository record for Buckling of thin-walled FRP plates under compression - A study on effects of boundary conditions and holes in the plate (opens in a new tab)

  6. Compression and buckling of composite panels with curvilinear fibers

    The plane in-plane compression response for a symmetrically laminated composite panel with a spatially varying fiber orientation has been analyzed for four different boundary conditions. Variation of the fiber angle along the length of a composite laminate results in stiffness properties that …

    vt Repository record for Compression and buckling of composite panels with curvilinear fibers (opens in a new tab)

  7. Postbuckling Analysis of Delaminated Composite Plates Under Compression (Composite Laminates)

    Failure mechanics of delamination problems in composite laminates under compression is investigated. The failure modes in general may include prebuckling, postbuckling, delamination growth and final failure. Buckling load is determined by solving an eigenvalue problem using a subspace iteration …

    uiuc Repository record for Postbuckling Analysis of Delaminated Composite Plates Under Compression (Composite Laminates) (opens in a new tab)

  8. Experimental buckling criteria for thin pierced plates

    … four different criteria for experimentally determining the elastic buckling loads of thin plates. The single test specimen was a ten foot length of a 14-gage section with a nominal 8" web and nominal 3" lipped flanges. The section was loaded as a beam bent about its minor axis so that the web was …

    rice Repository record for Experimental buckling criteria for thin pierced plates (opens in a new tab)

  9. Advanced Structures and Compositions for 3D Forming of Cellulosic Fibers

    … objective of this thesis was to systematically investigate strategies to endow fiber-based materials with toughness and formability. Bio-based polymers and green treatments were applied to develop 3D packaging structures. Formability, the material's ability for three-dimensional shaping, was …

    aalto Repository record for Advanced Structures and Compositions for 3D Forming of Cellulosic Fibers (opens in a new tab)

  10. Mechanical Behaviour of Carbon Fibre Reinforced Laminates and Honeycomb Sandwich Panels Subjected to Low-Velocity and High-Velocity Ballistic Impacts

    … structures subjected to different impact loadings is studied. The low-velocity and high-velocity ballistic impacts, and residual structural response are analysed. First, low-velocity impact response of the composite laminates and composite sandwich panels are investigated. The composite …

    unsw Repository record for Mechanical Behaviour of Carbon Fibre Reinforced Laminates and Honeycomb Sandwich Panels Subjected to Low-Velocity and High-Velocity Ballistic Impacts (opens in a new tab)

  11. Application of fracture mechanics to predict the growth of single and multi-level delaminations and disbonds in composite structures

    … methods to capture the complex growth of damage in laminated composites leads to a conservative design approach applied in today's composite aircraft structures. The aim of the presented research was to develop an improved methodology for the failure prediction of laminated composites containing …

    unsw Repository record for Application of fracture mechanics to predict the growth of single and multi-level delaminations and disbonds in composite structures (opens in a new tab)

  12. FABRICATION AND CHARACTERIZATION OF 3D-PRINTED CARBON FIBER-REINFORCED EPOXY COMPOSITE HONEYCOMB STRUCTURES WITH TAILORED CORE CONFIGURATIONS FABRICATED USING ENGINEERED VISCOELASTIC INKS

    This study investigates the fabrication and mechanical characterization of lightweight, moderate-to-high-strength short carbon fiber-reinforced epoxy composite honeycomb cores and sandwich structures, produced using direct ink writing (DIW) 3D printing and customized viscoelastic inks. The …

    oklahoma-thes Repository record for FABRICATION AND CHARACTERIZATION OF 3D-PRINTED CARBON FIBER-REINFORCED EPOXY COMPOSITE HONEYCOMB STRUCTURES WITH TAILORED CORE CONFIGURATIONS FABRICATED USING ENGINEERED VISCOELASTIC INKS (opens in a new tab)

  13. At the Intersection of Bistability and Elastic Instability: Switching and Locking Structures using Asymmetric Carbon Fiber Composites

    The next evolution of engineered structures would be to have an on-demand ability to become soft and foldable for packing in compact dimensions. This adaptive capability makes them convenient in transportation such as space structures where packaging of large deployable structures is crucial that …

    vt Repository record for At the Intersection of Bistability and Elastic Instability: Switching and Locking Structures using Asymmetric Carbon Fiber Composites (opens in a new tab)

  14. Mesoscale Structural and Mechanical Simulations of Cross-Linked Carbon Nanotube Materials

    … by formation of bonds or covalent cross-links (CLs) between nanotubes. In this work, an “effective bond model” of covalent CLs between carbon nanotubes is developed for mesoscopic simulations of cross-linked CNT materials. A general approach for fitting the CL model parameters based on …

    alabama Repository record for Mesoscale Structural and Mechanical Simulations of Cross-Linked Carbon Nanotube Materials (opens in a new tab)

  15. A robust crash simulation model for composite structures

    Fiber reinforced composites are widely used in aerospace, automotive and other industries due to their high stiffness & strength-to-weight ratio, corrosion resistant and energy absorption ability. The use of composites in primary energy absorbing components in vehicles, however, is very limited. …

    msu

  16. Nanoscale Coherent-Acoustic-Phonon Dynamics in Molybdenum Disulfide Using Ultrafast Electron Microscopy

    In this dissertation, photoexcited, defect-mediated anisotropic acoustic-phonon dynamics in molybdenum disulfide (MoS2) have been directly imaged on the nanometer-picosecond spatiotemporal scales in real space. MoS2 is a prototypical material system of transition metal dichalcogenides extensively …

    umn Repository record for Nanoscale Coherent-Acoustic-Phonon Dynamics in Molybdenum Disulfide Using Ultrafast Electron Microscopy (opens in a new tab)

  17. Vibration and Buckling Analysis of Unitized Structure Using Meshfree Method and Kriging Model

    The Element Free Galerkin (EFG) method, which is based on the Moving Least Squares (MLS) approximation, is developed here for vibration, buckling and static analysis of homogenous and FGM plate with curvilinear stiffeners. Numerical results for different stiffeners configurations and boundary …

    vt Repository record for Vibration and Buckling Analysis of Unitized Structure Using Meshfree Method and Kriging Model (opens in a new tab)

  18. Topology-graded structures: Exploring heterogeneous architected materials for load bearing mechanics

    … density varies spatially. They represent an emerging frontier in materials engineering, offering property combinations inaccessible to both conventional monolithic solids and homogeneous lattice architectures. Enabled by advances in additive manufacturing, HAMs can be deliberately engineered to …

    uvic Repository record for Topology-graded structures: Exploring heterogeneous architected materials for load bearing mechanics (opens in a new tab)

  19. Charakterisierung der Prozesskraftkomponenten beim mehrdimensionalen Umformen von Karton durch Ziehen

    Gegenstand dieser Arbeit ist die Entwicklung einer Methode zur Charakterisierung der komplexen Belastungssituation beim Tiefziehen mit unmittelbarer Kompression von Karton innerhalb geeigneter Ersatzversuche und deren Validierung mit Hilfe eines empirischen Models. Das Tiefziehen mit unmittelbarer …

    qucosa-diss

Page 1 of 2