Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"In-plane behavior"”.

  1. Experimental in-plane behavior of a generic scale model drag embedment anchor in Kaolinite test beds

    … of the design of drag embedment anchor and drag-in vertically loaded anchors. This experimental testing program quantifies two factors that describe the anchor trajectory and capacity: the equilibrium bearing factor (Ne) and the tangential bearing factor (Ne). These factors can aid in the …

    texas Repository record for Experimental in-plane behavior of a generic scale model drag embedment anchor in Kaolinite test beds (opens in a new tab)

  2. Seismic Behavior of Screen Grid Core Insulated Concrete Form Walls

    The use of the insulated concrete form (ICF) walls in residential buildings has increased over the past few decades. Much research has been conducted to evaluate the lateral strength of these walls by applying monotonic and cyclic loadings. In the current study, full-scale shake table experiments …

    portland-state Repository record for Seismic Behavior of Screen Grid Core Insulated Concrete Form Walls (opens in a new tab)

  3. Behavior of unbonded post-tensioned masonry walls

    … of the most widely used construction materials in the world. Incorporating post-tensioning into masonry offers a simple and cost-effective structural system. The post-tensioning techniques can be applied to different types of masonry members as either bonded or unbonded reinforcement. Recent …

    adelaide Repository record for Behavior of unbonded post-tensioned masonry walls (opens in a new tab)

  4. Experimental and analytical investigation of out-of-plane and in-plane seismic drift in unreinforced masonry infilled frames

    <p>The use of structural steel frames infilled with unreinforced masonry is a common construction technique and has been shown to provide significant strength and ductility for the resistance to lateral loads. The research described herein addresses the effect that prior damage -- resulting from …

    utk-theses Repository record for Experimental and analytical investigation of out-of-plane and in-plane seismic drift in unreinforced masonry infilled frames (opens in a new tab)

  5. Compression and buckling of composite panels with curvilinear fibers

    The plane in-plane compression response for a symmetrically laminated composite panel with a spatially varying fiber orientation has been analyzed for four different boundary conditions. Variation of the fiber angle along the length of a composite laminate results in stiffness properties that …

    vt Repository record for Compression and buckling of composite panels with curvilinear fibers (opens in a new tab)

  6. Role of timber in the seismic resilience of existing URM buildings

    The main topic of the thesis is the role of timber in the seismic resilience of unreinforced masonry (URM) buildings. The research addressed both existing timber components that can be encountered in URM buildings and timber-based retrofit solutions. The work presented herein can be split into two …

    trento Repository record for Role of timber in the seismic resilience of existing URM buildings (opens in a new tab)

  7. Experimental methods for investigating the effects of soil settlements and vibrations in cultural heritage buildings, induced by underground structures

    … assessment for cultural heritage structures, in the proximity of operating underground railways is twofold, by induced soil movements, from tunneling construction, and by fatigue, through induced ground-borne vibrations, from railway operations. Both hazards are found interacting, with effects …

    minho-thes Repository record for Experimental methods for investigating the effects of soil settlements and vibrations in cultural heritage buildings, induced by underground structures (opens in a new tab)

  8. Homogenization and Bridging Multi-scale Methods for the Dynamic Analysis of Periodic Solids

    This work investigates the application of homogenization techniques to the dynamic analysis of periodic solids, with emphasis on lattice structures. The presented analysis is conducted both through a Fourier-based technique and through an alternative approach involving Taylor series expansions …

    gatech Repository record for Homogenization and Bridging Multi-scale Methods for the Dynamic Analysis of Periodic Solids (opens in a new tab)

  9. Equivalent Viscous Damping and Inelastic Displacement for Strengthened and Reinforced Masonry Walls

    … system for low-rise residential buildings even for countries prone to seismic risk. Despite seismic design methods yet in use are force-based, in the last decades was highlighted as the differences in strength between two levels of damage is low, and therefore as the damage is better …

    trento Repository record for Equivalent Viscous Damping and Inelastic Displacement for Strengthened and Reinforced Masonry Walls (opens in a new tab)

  10. Penetration depth measurements of organic superconductors

    … magnetic penetration depth (λ) has been measured in single crystals of fully deuterated κ-(ET)2Cu[N(CN)2]Br. This material separates into superconducting (SC) and antiferromagnetic (AFI) phases. The relative amounts of SC and AFI phases has been shown to depend on the cooling rate of these …

    uiuc Repository record for Penetration depth measurements of organic superconductors (opens in a new tab)

  11. Computational and Experimental Study on the Behavior of Diaphragms in Steel Buildings

    The lateral force resisting system (LFRS) of a steel building consist of two parts, i.e., a vertical LFRS such as braced frames or shear walls, and a horizontal LFRS with diaphragms playing a crucial role. There are various types of floor and roof diaphragms in steel buildings, such as …

    vt Repository record for Computational and Experimental Study on the Behavior of Diaphragms in Steel Buildings (opens in a new tab)

  12. Nonlinear mechanical behavior of automotive airbag fabrics : an experimental and numerical investigation

    … the airbag has become an essential safety device in automobiles. The airbag cushion is composed of a woven fabric which is rapidly inflated during a car crash. The airbag dissipates the passenger’s kinetic energy thereby reducing injury through biaxial stretching of the fabric bag and escaping gas …

    ubc Repository record for Nonlinear mechanical behavior of automotive airbag fabrics : an experimental and numerical investigation (opens in a new tab) Download PDF for Nonlinear mechanical behavior of automotive airbag fabrics : an experimental and numerical investigation (opens in a new tab)

  13. Role of timber diaphragms in the seismic response of unreinforced masonry (URM) buildings

    The research presented in this thesis was focused on timber floor diaphragms in unreinforced masonry (URM) buildings. The work was divided into two phases. The first phase was aimed at the investigation of the effects of the in-plane behavior of timber diaphragms on the global seismic response of …

    trento Repository record for Role of timber diaphragms in the seismic response of unreinforced masonry (URM) buildings (opens in a new tab)

  14. Stability criteria for hollow-section steel arches

    Objective of the dissertation is to gain insight into the structural stability of steel arches comprising hollow cross-sections. Steel arches are typically manufactured from initially straight members, which are subjected to bending in order to meet the desired curvature. The roller-bending process …

    greece Repository record for Stability criteria for hollow-section steel arches (opens in a new tab)

  15. Plastic and elastic behavior of infilled frames subjected to in-plane loading

    <p>Elastic and plastic finite element studies were conducted to evaluate the in-plane behavior of concrete masonry infilled steel frames. ABAQUS was used to develop the finite element model and perform a parametric analysis. The model was verified by comparing the results with the experimental …

    utk-theses Repository record for Plastic and elastic behavior of infilled frames subjected to in-plane loading (opens in a new tab)

  16. Effect of orientation on in-isolation and in-soil geosynthetic properties

    Geosynthetics have been extensively used in pavement systems, either by placing the geosynthetic at the interface between the base and subbase layers or at the interface between the subbase and subgrade layers or within the unbound base course layer to enhance the performance of roadways under …

    texas Repository record for Effect of orientation on in-isolation and in-soil geosynthetic properties (opens in a new tab)

  17. Experimental and analytical study on the in-and out-of-plane interaction of infill walls subject to combined seismic and energy retrofitting using textile reinforced mortal and thermal insulation

    The effect of in-plane damage on the out-of-plane response of reinforced and thermally insulated masonry elements and infills was examined in this dissertation experimentally and analytically. Structural reinforcement was realized through the use of textile reinforced mortar while regular expanded …

    greece Repository record for Experimental and analytical study on the in-and out-of-plane interaction of infill walls subject to combined seismic and energy retrofitting using textile reinforced mortal and thermal insulation (opens in a new tab)