Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 139 for “"In-situ Experiments"”.
-
Impact of stream acidification on invertebrates : drift response to in situ experiments augmenting aluminum ion concentrations
Recent evidence strongly suggests that aluminum toxicity is important in determining the structural and functional characteristics of freshwater communities affected by acid precipitation. To determine the effect dissolved aluminum has on lotic invertebrates previously unexposed to anthropogenic …
-
Revealing novel degradation mechanisms in high-capacity battery materials by integrating predictive modeling with in-situ experiments
… morphological evolution, and mechanical failures in the electrodes during charge and discharge cycling. To understand the degradation of electrodes and resulting loss of capacity, this thesis aims to develop mechanistic-based models for predicting the chemo-mechanical processes of lithiation and …
-
Structural Health Monitoring and Damage Evaluation of Full-Scale Bridges Using Triaxial Geophones: Controlled In-Situ Experiments and Finite Element Modeling
… vibration-based damage detection methods using triaxial vibration records obtained using inexpensive geophones during in-situ, full-scale, damaged bridge tests.</p> <p>Geophones are passive directional sensors and much cheaper than accelerometers which are typically used for structural …
-
Excavation damage zones, fracture mechanics simulation and in situ strength of migmatitic gneiss and pegmatitic granite at the nuclear waste disposal site in Olkiluoto, Western Finland
In Finland and Sweden, the geological nuclear waste disposal is heading for the implementation phase in the next ten years or so. In the disposal concept, the knowledge of the in situ stress state, the excavation damage zone (EDZ), rock mass strength, hydraulic conductivity and other rock mass …
-
3D Study of Gas Hydrate Formation and Dissociation in Porous Media and DEM Modeling of Granular Materials
… methane gas hydrates availability and ongoing rise in demand for energy, motivated researchers to consider gas hydrates as a potential energy source. Production of methane from hydrate-bearing sediments requires hydrate dissociation for releasing mobile methane gas in sediments prior to gas …
-
Experimental characterization of deformation mechanisms in nanocrystalline thin films using in situ techniques
… load is applied is a key component of designing with engineering materials. Metals that are nanocrystalline (i.e. grain size < 100 nm) have unique properties owing to the ubiquity of grain boundaries within the microstructure. This dissertation presents new methods of testing and …
-
Characterization of Building Integrated Phase Change Materials Using Experiments and Simulation
… such as solar energy, and delay its release into a space, reducing peak cooling loads in summer and prolonging passive heating in winter. PCMs are most effective when their melting temperatures are near the room temperature setpoint. In locations with two distinct conditioning seasons and …
-
3D Printing of Specialty Devices for Geochemical Investigations: Real-Time Studies of Goethite and Schwertmannite Formation
… low-cost and easy to produce are needed to investigate low-temperature geochemical processes. We recently showed that desktop 3D printing stereolithography (SLA) can be used to efficiently fabricate a mixed flow reactor (MFR) with high dimensional accuracy comparable to traditional machining …
-
Ecological Validity of Immersive Virtual Environment Experiments on Human Thermal State and Behavioral Intentions: Experimental Protocol Factors
Using immersive virtual environment (IVE) based experiments to investigate human thermal states and thermal adaptive behaviors during the building design phase could help identify potential comfort issues and enable designers to optimize building performance cost-effectively before the actual …
-
Parameter estimation for unsaturated flow models
The estimation of parameters in models for soil unsaturated hydraulic properties from transient flow experiments via inversion of the governing initial-boundary value problem is examined. Emphasis is on the estimation of parameters from in-situ experiments where available data are in the form of …
-
Computational and experimental investigation into the self-limiting nature of electrodepositing ultrathin polymer films
This master’s thesis presents a combined computational and experimental investigation of the electrodeposition process for ultrathin polymer films, with a particular focus on the self-limiting nature of the process. A numerical model, implemented using smoothed particle hydrodynamics within the …
-
Nitrogen Rich Porous Organic Frameworks: Proton Conduction Behavior of 3D Benzimidazole and Azo-linked Polymers
… promise for use as acid-doped proton conducting membranes, due to their high porosity, excellent chemical and thermal stability, ease of synthesis, and high nitrogen content. Aided by very high surface area and pore volume, the material has the ability to adsorb high amounts of H3PO4 into its …
-
Microstructural Heterogeneity and the Mechanical Behavior of Nanocrystalline Metals
In this study, we have demonstrated through experiments on nanoscale metal films how the interplay between microstructural heterogeneity and size in ultrafine grained and nanocrystalline metals leads to unusual mechanical behavior. In the first part of the study, we have shown that (a) …
-
In situ investigation of defects in semiconductors
Dislocations and slip bands which originate from micro-cracks and other defects in silicon wafers during rapid thermal processing have a detrimental influence on the properties of electronic devices. Many of these defects originate at the edges of wafers. The characterization of these defects can …
-
Implementation of Phase Contrast Methods at the P05 Nanotomography Endstation at PETRA III
… is an ideal technique to study the inner structure of materials non-destructively at high spatial resolution, covering research areas such as material science, biology and medical research. In particular, in situ experiments are of high importance to study dynamics and processes in …
-
Development of an indoor air temperature predictive model for a naturally ventilated adobe mud hut; Botswana winter climatic conditions
A transient heat transfer model to predict the indoor air temperature within a Botswana traditional hut (made of adobe/mud bricks) is developed from Fourier’s law of heat transfer, taking into consideration conduction, convection and irradiance. The predictive model was developed and analysed using …
-
Surface Functionalisation and Characterization of Diamond Thin Films for Sensing Applications
In this thesis work nanoscrystalline optical properties of diamond and two recent new NCD functionalisation techniques involving UV light (one step method and photochemical oxidation) have been investigated. Firstly the oxidation of diamond surface caused by the irradiation of the surface with …
-
Influences Of Gas Thermodynamic Properties On Jets In Hypersonic Cross Flow
This study investigates the scaling and sensitivity of the large-scale flow features of jets inhypersonic cross flow for a range of gasses, Mach numbers, and stagnation temperatures. A gas heating system was devised to vary jet stagnation temperature and deliver quasi-steady jet conditions …
-
Novel methodology for assessing phytoplankton response to pCO2 enrichment in fresh and saltwater
… 780 parts per million by the year 2100. Research investigating the impacts of increasing CO2 is a relatively new field and the response of phytoplankton communities is largely unknown, especially in coastal and freshwater ecosystems where no CO2 manipulation studies have completed. The present …
Page 1 of 7