Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 140 for “"In-situ Testing"”.
-
Assessing liquefaction potential of soils utilising in-situ testing.
… problem for the community and geotechnical engineering designers (Pyrah et al., 1998). However, in practice, a single reliable method for assessing the liquefaction potential of soils is not well defined, particularly for aged soils. This is due mainly to the fact that most research has been …
-
In-situ testing techniques applied to embankments over soft organic soils
The investigation of a test fill over organic soils has been carried out using three in-situ testing techniques. One-half of the fill area is serviced by wick drains while the other half remains in a natural state. Piezometer cone penetration tests, dilatometer tests and field vane tests were used …
-
Predicting axially and laterally loaded pile behaviour using in-situ testing methods
… axial and lateral pile behaviour is a complex engineering problem. Traditional methods of data collection and subsequent analyses are frequently in error when compared to full-scale, load tests. In-situ testing, using advanced electronic tools, provides a means by which representative field data …
-
In-Situ Testing of a Carbon/Epoxy IsoTruss Reinforced Concrete Foundation Pile
… focuses on the field performance of IsoTruss®-reinforced concrete beam columns for use in driven piles. Experimental investigation included one instrumented carbon/epoxy IsoTruss®-reinforced concrete pile (IRC pile) and one instrumented steel-reinforced concrete pile (SRC pile) which were driven …
-
In-situ testing of soil with emphasis on its application to liquefaction assessment
… research was to advance the state of the art in interpretation and application of results from in-situ testing of soil, in particular the Cone Penetration Test (CPT), the Self-boring Pressuremeter Test (SBPMT) and the Flat Plate Dilatometer Test (DMT). This study critically examines the …
-
EFFECT OF KNEE FLEXION ON DEFORMATION OF NITINOL STENTS DURING IN SITU TESTING
In severe cases of peripheral artery disease with extensive stenosis, revascularization is crucial to avoiding limb loss. Though stenting of the femoral artery (FA) has higher levels of primary technical success than other interventions, high rates of restenosis remain a significant clinical …
-
In-situ testing of radiation effects on VLSI capacitors using the NPS linear accelerator
… The purpose of this paper is to better define the actual effects of radiation on the MOS VLSI capacitor. The radiation testing is conducted using the NPS electron linear accelerator. The data is taken while the capacitor is being exposed to an accumulating dose of electron radiation. The …
-
In-situ Testing of Field Diagnostic Methods for the Wood Components at Taliesin West
Situated within the desert of Scottsdale, Arizona, Taliesin West served as Frank Lloyd Wright’s winter home and school for the Taliesin Fellows from 1938 to 1959. As an experimental design laboratory, Wright trained apprentices by enlisting them to construct and continually modify the site over the …
-
In Situ Testing and its Application to Foundation Analysis in Fine-Grained Unsaturated Soils
The in situ test is an important part of a geotechnical engineer’s arsenal. Currently, there are no established methods for interpreting results of in situ tests in unsaturated soils. The difficulty in interpreting in situ tests in unsaturated soil comes from the presence of suction, which is often …
-
The development of in-situ testing infrastructure and characterization of hydrogen embrittlement in pipeline steels
Hydrogen is being considered for low-carbon energy transport, but assessing pipeline readiness requires testing infrastructure and mechanical characterization under gaseous hydrogen. This dissertation addresses both needs by (i) designing and commissioning a modular gas management system with two …
-
Design and in situ testing of a piezometer system to measure earthquake -induced pore -pressure changes
Pore pressure changes have been measured in fine sand deposits that are known to have liquefied during earthquakes. Some of the measured signals have not been similar to what was expected during earthquake-induced liquefaction. Using artificially generated signals, several investigators have …
-
In-Situ Testing of Uretek's Injectable Barrier<sup>SM</sup> as a Mechanism for Groundwater Control
Construction projects involving the installation or repair of subsurface structures or utilities often require dewatering to induce a temporary lowering of the local groundwater elevation to facilitate construction. In the event that a known contaminant plume is present in an adjacent area, this …
-
Investigation of roller-integrated compaction monitoring and in-situ testing technologies for characterization of pavement foundation layers
… use of proper construction methods, and following proper quality control (QC) and quality assurance (QA) procedures. There has been growing interest in the United States for incorporating roller-integrated compaction monitoring technologies and various in-situ strength/stiffness based test …
-
Development of methods for in situ testing of response times of resistance temperature detectors in commercial pressurized water reactors
… temperature detectors (RTD's) are used in nuclear plant safety systems to measure process temperatures. The purpose of this research was to develop and evaluate suitable methods for in situ testing of the response time of RTD's.</p><p>Three testing procedures were used in laboratory …
-
Assessment of the dynamics and performance of an in-service twelve-span twin bridge using in-situ testing and finite element modelling
… the most critical components of any nation’s infrastructure. They are subjected to dead and live loads along with extreme stresses resulting from natural and man-made hazards. To improve the quality of bridge infrastructures and avoid extensive human and economic losses due to bridge collapse …
-
Multi-Scale Behavior at Geomaterial Interfaces
The design of interface elements in geotechnical engineering traditionally involves empiricism and lacks a solid fundamental underpinning based on the controlling mechanisms. These design shortcomings exist due to deficiencies in the fundamental understanding of geotechnical interface behaviors and …
-
Stiffness Degradation and Sample Damage of the Lea Park Formation Shale for A Slow-Moving Landslide in South-Central Saskatchewan
… built on shales with smectite can result in relatively conservative design or metastable structures. A smecititic shale will be hydrophilic and prone to swelling and degradation upon drilling and sampling. This research demonstrates the use of laboratory and in-situ testing to determine a …
-
Critical assessment of the canlex blast experiment to facilitate a development of an in-situ liquefaction methodology using explosives
In current engineering practice, the liquefaction susceptibility of soil is assessed by in-situ testing or by laboratory testing. The in-situ testing approach is based on field performance correlation approach and it is good for sandy soils, but becomes difficult to apply in soils such as gravels, …
Page 1 of 7