Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"In-situ processing"”.

  1. MOCVD GROWTH AND IN SITU PROCESSING OF β-Ga2O3 BASED HETEROSTRUCTURES

    Ultra-wide bandgap (UWBG) semiconductors are of interest for next-generation radio frequency (RF) and high-voltage power electronic devices. Owing to its ~4.8 eV bandgap (Eg) and estimated critical field strength of ~8 MV/cm, β-Ga2O3 is an UWBG material exhibiting a theoretical Johnson’s figure of …

    cornell Repository record for MOCVD GROWTH AND IN SITU PROCESSING OF β-Ga2O3 BASED HETEROSTRUCTURES (opens in a new tab) Embargoed until 2028-01-08

  2. In Situ Processing of PtSn Electrocatalysts for CO Tolerance in PEM Fuel Cells

    Improved anode CO tolerance is a promising approach for integrating low-temperature PEM fuel cells with hydrocarbon fuel processors in cost-effective systems for portable and stationary power applications. PtSn@Pt core-shell nanoparticle electrocatalysts - created by applying cyclic potentials in …

    maryland Repository record for In Situ Processing of PtSn Electrocatalysts for CO Tolerance in PEM Fuel Cells (opens in a new tab)

  3. Aspects of Bi₂Sr₂Ca₂Cu₃O on silicon bolometer fabrication and operation

    Preliminary work to the production of a Bi₂Sr₂Ca₂Cu₃Oy superconducting bolometer was done. An analysis of the noise performance of Bi₂Sr₂Ca₂Cu₃Oy thin films was done with particular attention to the character and magnitude of 1/f noise in the material. Deposition of Bi₂Sr₂Ca₂Cu₃Oy onto a silicon …

    ubc Repository record for Aspects of Bi₂Sr₂Ca₂Cu₃O on silicon bolometer fabrication and operation (opens in a new tab) Download PDF for Aspects of Bi₂Sr₂Ca₂Cu₃O on silicon bolometer fabrication and operation (opens in a new tab)

  4. Evaluating Parallel Particle Advection Algorithms Over Various Workloads

    … the problem of efficient particle advection in a distributed- memory parallel setting, focusing on four popular parallelization algorithms. The performance of each of these algorithms varies based on the desired workload. Our research focuses on two important questions: (1) which …

    oregon Repository record for Evaluating Parallel Particle Advection Algorithms Over Various Workloads (opens in a new tab)

  5. Experimental studies and modeling of mechanical properties and morphologies of in situ polymer composites

    In this study, a series of experiments was set up in order to analyze the morphology development and mechanical properties of poly(ethylene terephthalate) (PET)/ liquid crystalline polymer (LCP) blends. Simulations of the injection molded blends at various process conditions were performed using …

    njit Repository record for Experimental studies and modeling of mechanical properties and morphologies of in situ polymer composites (opens in a new tab)

  6. An analysis of the use of programmable controllers to control an in situ leach mine wellfield

    In situ mining is a relatively new method that has the potential of recovering a variety of minerals. This process is quickly becoming an alternative to conventional mining techniques that are environmentally unsound. Two problems associated with in situ mining are, the amount of waste water …

    northern-iowa Repository record for An analysis of the use of programmable controllers to control an in situ leach mine wellfield (opens in a new tab)

  7. Automating Camera Placement for In Situ Visualization

    Trends in high-performance computing increasingly require visualization to be carried out using in situ processing. This processing most often occurs without a human in the loop, meaning that the in situ software must be able to carry out its tasks without human guidance. This dissertation explores …

    oregon Repository record for Automating Camera Placement for In Situ Visualization (opens in a new tab)

  8. Stoichiometry of in-situ combustion

    Includes bibliographical references.

    colo-mines Repository record for Stoichiometry of in-situ combustion (opens in a new tab)

  9. Oil shale surface retorting technology selection: a comparative analysis

    Includes bibliographical references (pages 215-219).

    colo-mines Repository record for Oil shale surface retorting technology selection: a comparative analysis (opens in a new tab)

  10. The Time Slice Selection Bake-off

    … grows, the ability to identify key time steps in a simulation has emerged as a key challenge. In response, a number of time slice selection methods and algorithms have been proposed. However, no past work has performed a comparative analysis of selection methods as well as their evaluation …

    oregon Repository record for The Time Slice Selection Bake-off (opens in a new tab)

  11. Exploration of In-Situ Hot Deformation in Wire-Arc Additive Manufacturing

    Wire-arc additive manufacturing (WAAM) offers advantages over other additive manufacturing (AM) processes in deposition rate, cost, and process familiarity. Due to the nature of fusion-welding-based processes, however, microstructure, material properties and residual stress are difficult to control …

    ut-knoxville Repository record for Exploration of In-Situ Hot Deformation in Wire-Arc Additive Manufacturing (opens in a new tab)

  12. Principles of hydrology applied to leaching of ore in place

    Includes bibliographical references.

    colo-mines Repository record for Principles of hydrology applied to leaching of ore in place (opens in a new tab)

  13. Stability evaluation for horizontal modified in situ retort at Cowboy Canyon oil shale

    Includes bibliographical references (pages 142-148).

    colo-mines Repository record for Stability evaluation for horizontal modified in situ retort at Cowboy Canyon oil shale (opens in a new tab)

  14. Manufacturable process and tool for high performance metal/high-k gate dielectric stacks for sub-45 nm CMOS & related devices

    Off state leakage current related power dominates the CMOS heat dissipation problem of state of the art silicon integrated circuits. In this study, this issue has been addressed in terms of a low-cost single wafer processing (SWP) technique using a single tool for the fabrication of high-κ …

    clemson Repository record for Manufacturable process and tool for high performance metal/high-k gate dielectric stacks for sub-45 nm CMOS & related devices (opens in a new tab)

Page 1 of 2