Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"In-space Assembly"”.
-
Launch Vibration Attenuation For In-Space Assembly Cargo
This thesis investigates the implementation of a passive isolator with a pressurized air cushion for spacecraft payloads in mission architectures implementing in-space assembly technologies. A pressurized air bed capable of briefly surviving the space environment for cargo delivery was prototyped …
-
Reconfigurable Resonant Cubic HF Phased Array for In-Space Assembly Operation
… phased arrays face two major shortcomings: the presence of ambiguities in direction of arrival measurements and beam broadening endfire effects. The literature provides methods for addressing and minimizing these problems on conventional planar phased array structures, but there has …
-
A methodology for conducting design trades related to advanced in-space assembly
In the decades since the end of the Apollo program, manned space missions have been confined to Low Earth Orbit. Today, ambitious efforts are underway to return astronauts to the surface of the Moon, and eventually reach Mars. Technical challenges and dangers to crew health and well-being will …
-
Semantic and Fiducial Aided Graph Simultaneous Localization and Mapping for Robotic In-Space Assembly and Servicing of Large Truss Structures
… aided graph simultaneous localization and mapping (SF-GraphSLAM) method that is tailored for robotic assembly and servicing of large truss structures. SF-GraphSLAM contributes to the state of the art by creating a novel way to add associations between map landmarks, in this scenario fiducials, …
-
Task Modeling, Sequencing, and Allocation for In-Space Autonomous Assembly by Robotic Systems
As exploration in space increases through the use of larger telescopes, more sophisticated structures, and physical exploration, the use of autonomous robots will become instrumental to build and maintain the infrastructures required for this exploration. These systems must be autonomous to deal …
-
Bond exchange reactions in high temperature thermoset polymers
In this work, we examine the use of exchangeable bonds within an all-aromatic thermoset to enable reversible bonding towards potential utility as an adhesive for in-space assembly. Interchain transesterification (ITR) is a type of bond exchange reaction accessible by polymers possessing ester …
-
Relative Pose Determination of a Non-Cooperative Spacecraft using Thermal Imagery
Accurate and reliable pose determination of a non-cooperative spacecraft is a critical requirement for applications of on-orbit servicing, orbital debris removal, and in-space assembly missions. Recent advances in deep learning and the increasing availability of open-source datasets have enabled …
-
Sampling Based Motion PLanning for Minimizing Position Uncertainty with Stewart Platforms
The work described in this dissertation provides a unique approach to error based motion planning. Originally designed specifically for use on a parallel robot,these methods can be extended to a more general case of any well-defined robotic platforms. Requirements for application of these methods …
-
INSPACE BENDING OF MULTISTABLE BOOMS
Recently NASA has been investigating the usage of bistability in CTM booms; the two stable state configurations being fully rolled (on earth), and fully deployed (up in space). Essentially the bistability comes from the coupling between the tape spring geometry and its antisymmetric composite plies …
-
Localization Performance Improvement of a Low-Resolution Robotic System using an Electro-Permanent Magnetic Interface and an Ensemble Kalman Filter
As the United States is on the cusp of returning astronauts to the Moon, it becomes increasingly apparent that the assembly of structures in space will have to rely upon robots to perform the construction process. With a focus on sustaining a presence on the Moon's surface in such a harsh and …
-
Development of miniature robotic arm manipulators to enable smallsat clusters
This Thesis was approved for publication on 2017-04-28 at 13:56.
-
Active Force Correction of Off-Nominal Structures Using Intelligent Scaffolding
The culmination of this research focuses on the area of structural support and stability as it relates to the field of large space structures. Fitting into the branch of in-space assembly, servicing, and manufacturing (ISAM), this topic covers essential subject matter areas of robotic manipulation, …
-
Development Of A Climbing Collaborative Mobile Manipulator (C2M2) For Supporting In-Space Assembled Truss Structures
The Climbing Collaborative Mobile Manipulator (C2M2) is being developed as a robotic system to support truss outfitting operations. The goal of the project is to build a truss climbing robot and demonstrate gaits that allow the robot to reach any point on the structure. The demonstrated motions are …
-
Optical Satellite/Component Tracking and Classification via Synthetic CNN Image Processing for Hardware-in-the-Loop testing and validation of Space Applications using free flying drone platforms
The proliferation of reusable space vehicles has fundamentally changed how we inject assets into orbit and beyond, increasing the reliability and frequency of launches. Leading to the rapid development and adoption of new technologies into the Aerospace sector, such as computer vision (CV), machine …
-
Parametric Modeling of Deformable Linear Objects for Robotic Outfitting and Maintenance of Space Systems
Outfitting and maintenance are important to an in-space architecture consisting of long duration missions.During such missions, crew is not continuously present; robotic agents become essential to the construction, maintenance, and servicing of complicated space assets, requiring some degree of …