Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"InAlGaAs"”.
-
InAlGaAs-InP laterally coupled DBR and DFB lasers for microwave generation
… lasers, both single-and dual-mode, based on InAlGaAs-InP material emitting at 1.35 mum. The aim of the research is to realise a compact device, able to emit two wavelengths simultaneously, to be used for the generation of gigahertz (GHZ) and terahertz (THz) signals by photo-mixing. The …
-
InAlGaAs/InP light emitting transistors and transistor lasers operating near 1.55 μm
… of long wavelength LETs and TLs based on InAlGaAs/InP material system. First, the doping behaviors of zinc (Zn) and carbon (C) in InAlGaAs layers for p-type doping were investigated. Using both dopants, the N-InP/p-In0.52(AlxGa1-x)0.48As/N-In0.52Al0.48As LETs with InGaAs quantum wells …
-
THEORETICAL COMPARISON OF TENSILE STRAINED InGaAs/InAlGaAs AND InGaAs/InGaAsP QW LASERS EMITTING AT 1.55 ?M
0.78% and 1% tensile strained InGaAs/InAlGaAs and InGaAs/InGaAsP QW lasers. For a small barrier band gap (small band discontinuity), a small number of subbands and a lower density of states result. Thus, the optical gain and T0 are higher. However, the 3 dB bandwidth is reduced by 40 - 50% at 350K …
-
An investigation of broad gain spectrum in InGaAs/InAlGaAs quantum well lasers latticed matched to InP
… that are made from the latticed matched InGaAs/InAlGaAs material which have less temperature dependence of their threshold current in comparison to the established phosphorous quaternary semiconductor material. In particular, multiple width quantum wells (which is also referred to as asymmetric …
-
Molecular Beam Epitaxial Growth Optimization for Next Generation Optoelectronic Devices Based on III-V Semiconductors
… for precise temperature monitoring is required. InAlGaAs has been an emerging candidate for 1319 nm laser-pumped, high-efficiency photonic power converters (PPCs). To acquire smooth surface morphology and minimize crystalline defects, such quaternary material is preferred to be lattice-matched on …
-
Semiconductor Materials and Devices for High Efficiency Broadband and Monochromatic Photovoltaic Energy Conversion
… is the semiconductor quaternary alloy InAlGaAs lattice-matched to InP for photonic power converter operation in the telecommunications O-band, near 1310 nm. I describe the design and characterization of multi-junction InAlGaAs/InP photonic power converters grown by molecular beam …
-
Characterization and simulations of long wavelength indium aluminum gallium arsenideindium phosphide lasers
… wavelength indium aluminium gallium arsenide (InAlGaAs) lattice-matched to indium phosphide (InP) diode laser, emitting between 1.648 to 1.7 mum in wavelength. The active region of one laser diode sample consists of six In0.69Ga 0.31As quantum wells (1.0% compressive strain) and seven In0.52 …
-
Indium Phosphide Based Indium Arsenide Quantum Dot Infrared Photodetectors
… QD growth techniques, photoconductive InAs/InAlGaAs/InP QDIPs grown on InP by MBE technique were presented. These devices demonstrated responses to normal incident photoexcitations in the 5-18-mum range. The QDIP device based on bound-to-bound transitions shows a peak responsivity of 113 …
-
Detailed Balance Modeling of Monochromatic Photovoltaic Power Conversion
… GaAs PPC. I also predict efficiency for a InAlGaAs device under development that targets conversion at telecommunication wavelength of 1310 nm.
-
DESIGN & FABRICATION OF 980NM WAVELENGTH QUANTUM WELL LASER
… calculations are also extended to the quaternary InAlGaAs system. The results show that because of the compressive strain in the well region for both systems, the heavy hole does not couple with the light hole and the spin orbit splitting hole. The uppermost heavy-hole subbands exhibit good …
-
Design, Modeling, and Optimization of Thin and Ultra-thin Photonic Power Converters Operating at 1310 nm Laser Illumination
… and optimizing ultra-thin single junction InAlGaAs PPC with integrated back reflectors (BR) for operation at the telecommunications wavelength of 1310 nm and numerically studies the light trapping capability of three BR types: planar, cubic nanotextured, and pyramidal nanotextured. Optical …
-
High Speed Modulation Characteristics of Semiconductor Nanolasers and Coupled Ring Laser Systems
… a bending radius of 50 µm is fabricated on an InAlGaAs/InP MQW material. The integrated device was observed to lase in continuous-wave mode at room temperature with a threshold current of 27 mA. By tuning the pumping ratio between two coupled rings, our measured results clearly show a bandwidth …
-
Quantum Dot Spin Dynamics and Quantum Randomness for Secure Optical Communication
… investigates one-, two-, and four-layer InAs/InAlGaAs Stranski-Krastanov quantum dots to assess layer-dependent carrier type and spin coherence. Increasing layer number induces a transition from electron to hole resident carriers due to interlayer tunnelling into lower-energy dots, the …
-
Finite-aperture tapered unstable resonator lasers
… method is introduced to create the FATURL in InAlGaAs/-InGaAsP/InP material emitting at about 1410 nm. Fabrication consists of photolithography, electron-beam lithography, wet etch and dry etching processes, metal and dielectric electron-beam evaporation, and rapid-thermal annealing. FATURLs …
-
High-speed Properties of 1.55-micron-wavelength Quantum Dot Semiconductor Amplifiers and Comparison with Higher-Dimensional Structures
… (0-D) QD's dynamics to those in 1-D InAs/InAlGaAs/InP quantum-dash (QDash), and 2-D InGaAsP/InGaAsP/InP quantum-well (QW) SOAs, both of which also operate near 1.55-µm wavelengths, and are made with matching or similar materials and structures. The ultrafast (around 1 ps) and long-lived …
-
Análisis tomográfico a nanoescala de materiales nanoestructurados para dispositivos fotovoltaicos
… APT de muestras de QDs de InAs/GaAs con capas de InAlGaAs para QDIBSCs ha mostrado desviaciones importantes en la distribución de composición del material respecto al diseño realizado. Así, se ha observado un gradiente en la composición de In dentro de los QDs, así como la formación de un anillo …