Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Incipient Fault"”.

  1. Underground distribution cable incipient fault diagnosis system

    … for an efficient, non-destructive, and online incipient fault diagnosis system (IFDS) to detect underground cable incipient faults before they become catastrophic. The system provides vital information to help the operator with the decision-making process regarding the condition assessment of …

    tamu Repository record for Underground distribution cable incipient fault diagnosis system (opens in a new tab)

  2. Incipient fault diagnosis in squirrel-cage induction motors

    … rotor broken-bars and inter-turn short-circuit faults in induction motors is introduced based on electromagnetic field laws governing the operation and performance of induction machines. The basis of this new method is to monitor the orientation of the axis of the induction machine's magnetic …

    marquette Repository record for Incipient fault diagnosis in squirrel-cage induction motors (opens in a new tab)

  3. Sustained and incipient fault location for utility distribution system

    Automated fault location systems use power quality monitoring and circuit data to provide with a distance or impedance estimate to the fault. This can be used to avoid manual patrolling of the entire feeder in case of a main feeder lockout. It can also be used for circuits with repeated momentary …

    texas Repository record for Sustained and incipient fault location for utility distribution system (opens in a new tab)

  4. Incipient fault detection and isolation of sensors and field devices

    … purpose of this research is to develop a robust fault detection and isolation method, for detecting faults in process sensors, actuators, controllers and other field devices. The approach to the solution to this problem is summarized below.</p> <p>A novel approach for the validation of control …

    utk-theses Repository record for Incipient fault detection and isolation of sensors and field devices (opens in a new tab)

  5. Analysis of incipient fault signatures in inductive loads energized by a common voltage bus

    … and voltages, for early detection of motor faults in the form of embedded algorithms. In the event of multiple motors energized by a common voltage bus, the cost of installing and maintaining fault monitoring and detection devices on each motor may be avoided, by using bus level aggregate …

    tamu Repository record for Analysis of incipient fault signatures in inductive loads energized by a common voltage bus (opens in a new tab)

  6. Development of an incipient fault detection and isolation method for the steam generator system of a nuclear power plant

    … about the state of the process. Therefore, fault detection and isolation (FDI), aiming at finding abnormal sensors and field devices at early stages of degradation, is very important in monitoring the status and improving the overall productivity of nuclear power plants. Many FDI techniques …

    ut-knoxville Repository record for Development of an incipient fault detection and isolation method for the steam generator system of a nuclear power plant (opens in a new tab)

  7. Uncertainty quantification of faults in rotating machines

    … “Can uncertainty quantification enhance the fault prediction in rotating machines?” Three objectives were constructed to facilitate the answer. The first objective was to construct probabilistic degradation models of ball bearings, given their immense importance in every rotating machine, …

    ttu Repository record for Uncertainty quantification of faults in rotating machines (opens in a new tab)

  8. Artificial Intelligence Applications in the Diagnosis of Power Transformer Incipient Faults

    … for the diagnosis of power transformer incipient fault. The AI techniques include artificial neural networks (ANN, or briefly neural networks - NN), expert systems, fuzzy systems and multivariate regression. The fault diagnosis is based on dissolved gas-in-oil analysis (DGA). A …

    vt Repository record for Artificial Intelligence Applications in the Diagnosis of Power Transformer Incipient Faults (opens in a new tab)

  9. Gear Fault Detection Using Non-Contact Magnetic Rotation Position Sensors

    … were used to condition the TE so that localized faults were observable. Characteristic feature extraction on the TE using RMS, Kurtosis and Crest Factor was used to quantify gearbox dynamics. These features were able to measure dynamic changes in gearbox health, such as wearing in the gears or …

    queens Repository record for Gear Fault Detection Using Non-Contact Magnetic Rotation Position Sensors (opens in a new tab)

  10. An artificial neural network approach to transformer fault diagnosis

    … network (ANN) approach to diagnose and detect faults in oil-filled power transformers based on dissolved gas-in-oil analysis. The goal of the research is to investigate the available transformer incipient fault diagnosis methods and then develop an ANN approach for this purpose. This ANN …

    vt Repository record for An artificial neural network approach to transformer fault diagnosis (opens in a new tab)

  11. CLASSIFICATION OF HIGH IMPEDANCE FAULTS, INCIPIENT FAULTS AND CIRCUIT BREAKER RESTRIKES DURING CAPACITOR BANK DE-ENERGIZATION IN RADIAL DISTRIBUTION FEEDERS

    … unsafe operation, including a high impedance fault (HIF) caused by a downed conductor touch ground surface, an incipient fault (IF) caused by partial breakdown to a cable insulation, and a circuit breaker (CB) malfunction due to capacitor bank de-energization to cause current restrikes. These …

    siu-theses Repository record for CLASSIFICATION OF HIGH IMPEDANCE FAULTS, INCIPIENT FAULTS AND CIRCUIT BREAKER RESTRIKES DURING CAPACITOR BANK DE-ENERGIZATION IN RADIAL DISTRIBUTION FEEDERS (opens in a new tab)

  12. Toward cascading failure mitigation in high voltage power system capacitors

    … an approach to pre-emptively anticipate probable incipient fault locations toward improving designs for systems yet to be commissioned.This Dissertation presents a high-voltage capacitor simulation model, before exploring two questions about these hermetically sealed, highly modular assets: where …

    strathclyde Repository record for Toward cascading failure mitigation in high voltage power system capacitors (opens in a new tab)

  13. Introducing statistical and machine learning-based methods of enhancing the resiliency and security of electrical-based critical infrastructure

    … actionable information to enable real-time Incipient Fault Prediction (IFP), (ii) reducing an adversary’s ability to intercept information by introducing AI-based, session-based cryptographic scheme generation, and (iii) improving information’s trust by identifying the source of wireless …

    utc Repository record for Introducing statistical and machine learning-based methods of enhancing the resiliency and security of electrical-based critical infrastructure (opens in a new tab)

  14. Low-cost motor drive embedded fault diagnosis systems

    … in industrial manufacturing plants. Bearing faults, insulation faults, and rotor faults are the major causes of electric motor failures. Based on the line current analysis, this dissertation mainly deals with the low cost incipient fault detection of inverter-fed driven motors. Basically, low …

    tamu Repository record for Low-cost motor drive embedded fault diagnosis systems (opens in a new tab)

  15. Condition monitoring of hardware redundant machinery subject to non-stationary operations

    … work is to develop techniques for detection of faults in hardware redundant machinery. Hardware redundancy is a design methodology that can be utilized to increase the reliability of a system. The inclusion of multiple redundant components can allow for fault tolerant design of systems, as the …

    laurentian Repository record for Condition monitoring of hardware redundant machinery subject to non-stationary operations (opens in a new tab)

  16. Health monitoring of a Brayton cycle-based power conversion unit

    … for the design of advanced health monitoring (fault diagnosis) systems to improve safety, system reliability and operational performance. Traditionally, fault diagnosis has been performed by applying limit value checking techniques. Although simple, the inability of these techniques to model …

    nwu-za Repository record for Health monitoring of a Brayton cycle-based power conversion unit (opens in a new tab)

  17. Reliable Multiphase Induction Motor Drives

    … failures in induction motors are due to stator faults. It is well known that a stator fault starts as an inter-turn fault within a phase and then propagates into phase-to-phase and phase-to-ground faults that can then lead to complete shutdown of the motor. Two approaches have been taken in this …

    tamu Repository record for Reliable Multiphase Induction Motor Drives (opens in a new tab)

  18. Uncertainty Management in the Prediction of the Remaining Useful Life of Ball Bearings and Li-ion Batteries

    … aim is to enhance the calculation of the incipient fault point (IF) of ball bearings and Li-ion batteries. To achieve the first specific aim, a methodology was developed to calculate the IF based on the Multiscale Diversity Entropy approach. This approach enables the proposed methodology …

    ttu Repository record for Uncertainty Management in the Prediction of the Remaining Useful Life of Ball Bearings and Li-ion Batteries (opens in a new tab)

  19. In situ blocked force measurement in gearboxes with potential application for condition monitoring

    … breakage is serious and legitimate concerns. Incipient fault detection in gears has thus become the subject of intensive investigation and at this stage of development, there are many competing condition monitoring methods based on vibration signal analysis. This thesis summarizes the research …

    salford Download PDF for In situ blocked force measurement in gearboxes with potential application for condition monitoring (opens in a new tab)

  20. Rotating machinery monitoring: Feature extraction, signal separation, and fault severity evaluation

    … detection and diagnosis of different machinery faults to improve safety and reliability and cut down cost. However, the accuracy and timeliness of many such systems are still inadequate due to various noises and the interference of multiple signals. Therefore, many such systems tend to be either …

    ottawa-retro Repository record for Rotating machinery monitoring: Feature extraction, signal separation, and fault severity evaluation (opens in a new tab)

Page 1 of 2