Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 223 for “"Inconel 718"”.

  1. Characterization of Inconel 718: Using the Gleeble and Varestraint Testing Methods to Determine the Weldability of Inconel 718

    … to include machining, welding and heat treating. Inconel 718 was developed to overcome problems with post-weld cracking that were common in precipitation hardened nickel based superalloys strengthened by γ’. Inconel 718 is strengthened by γ’’ and is less sensitive to cracking during post-weld …

    calpoly Repository record for Characterization of Inconel 718: Using the Gleeble and Varestraint Testing Methods to Determine the Weldability of Inconel 718 (opens in a new tab)

  2. Pulsed CO₂₊ laser welding of inconel 718

    <p>Welding of Inconel 718 by conventional methods produces microfissures within the heat affected zone (HAZ) which weakens the weld. This study investigated the effects of pulsed CO<sub>2</sub> laser welding upon the HAZ to determine the suitability of this process for commercialization.</p> …

    ut-knoxville Repository record for Pulsed CO₂₊ laser welding of inconel 718 (opens in a new tab)

  3. Pulse tailored laser welding of Inconel 718

    … were made on one-eighth inch thick wrought Inconel 718 using a pulsed CO<sub>2</sub> laser in order to demonstrate the feasibility of the process and to observe the manner in which weld structure and weld microstructure were affected by varying the process parameters. It was determined that …

    ut-knoxville Repository record for Pulse tailored laser welding of Inconel 718 (opens in a new tab)

  4. Electron Beam Welding of Rolled Inconel 718

    … parameters on the weld quality of thick rolled Inconel 718 plate and to optimize the same. A full-factorial experiment having nine heat inputs (three different levels of welding speed and beam current) was designed. The weld quality was characterized based on weld geometry, microhardness, and …

    tamu Repository record for Electron Beam Welding of Rolled Inconel 718 (opens in a new tab)

  5. Nanobrazing of Inconel 718 and Ti-6Al-4V

    … (nanobrazing) material performance when joining Inconel 718 and Ti-6Al-4V.In the dissertation studies, we compare the mechanical strength of Cu-Ag and Ag nanomaterials and high entropy alloy nanoparticles for laser brazing Inconel 718 to their bulk counterparts. It was found that the Cu-Ag …

    utk-theses Repository record for Nanobrazing of Inconel 718 and Ti-6Al-4V (opens in a new tab)

  6. Modelling of the inertia welding of Inconel 718

    … model to describe the constitutive relation of IN718 at high temperature. The results from the different models are in broad agreement. The shear stress induced by friction at the interface is found to enlarge the upset value; its effect must be taken into account if the upset is to be predicted …

    birmingham Download PDF for Modelling of the inertia welding of Inconel 718 (opens in a new tab)

  7. Electrochemical Polishing of Selective Laser Melted Inconel 718

    … parts for aerospace and automotive industries. Inconel 718, a Ni-Cr-Fe based superalloy, has been extensively used in extreme environments such as nuclear, oil/gas, aircraft applications. Inconel powder can be consolidated by using selective laser melting (SLM) process, which helps in preserving …

    tamu Repository record for Electrochemical Polishing of Selective Laser Melted Inconel 718 (opens in a new tab)

  8. Fiber laser welding of nickel-based superalloy Inconel 718

    Inconel 718 (IN 718) is widely used in applications, such as aircraft and power turbine components. Recently, fiber laser welding has become an attractive joining technique in industry for fabrication and repair of service-damaged components. However, a major limitation in the laser welding of IN …

    manitoba Repository record for Fiber laser welding of nickel-based superalloy Inconel 718 (opens in a new tab)

  9. Electron Beam Welding of Selective Laser Melted Inconel 718

    … Electron Beam Welding (EBW) to join SLM’ed Inconel 718 (IN718) parts by characterizing the welds based on their material and mechanical properties and comparing them with their rolled counterparts. Weld properties of the Hot Isostatically Pressed (HIP) samples were also compared. The …

    tamu Repository record for Electron Beam Welding of Selective Laser Melted Inconel 718 (opens in a new tab)

  10. Návrh podpůrných struktur pro díly z materiálu Inconel 718

    … dielov z materiálu niklovej superzliatiny IN718 technológiou Selective laser melting (SLM). Cieľom práce je navrhnúť podpornú štruktúru tak, aby technologické problémy (nadmerné deformácie diela v dôsledku vysokých zvyškových napätí a nedostatočný odvod tepla) boli eliminované a zároveň …

    brno-tech Repository record for Návrh podpůrných struktur pro díly z materiálu Inconel 718 (opens in a new tab)

  11. Characterization of linear friction welded in-service Inconel 718 superalloy

    … (LFWing) process to manufacture or repair of Inconel® 718 superalloy (IN 718) aero engine BLISKs. This was achieved by simulating a LFW joint made of virgin (V) and in-service (IS) (from samples extracted from an actual turbine disk) IN 718 material. An in-depth microstructural …

    ubc Repository record for Characterization of linear friction welded in-service Inconel 718 superalloy (opens in a new tab) Download PDF for Characterization of linear friction welded in-service Inconel 718 superalloy (opens in a new tab)

  12. Novel Fatigue Testing of Laser Powder Bed Fused Inconel 718

    … data for wrought and AM metals with focus on Inconel 718, including influence of defects caused by metal AM processes and their impact on fatigue life. Traditional fatigue tests are time consuming and expensive, preventing testing of the plethora of AM metals manufactured using different print …

    tamu Repository record for Novel Fatigue Testing of Laser Powder Bed Fused Inconel 718 (opens in a new tab)

  13. Investigation of die wear by modelling the extrusion of Inconel 718

    … quantifying wear occurring in the extrusion of INCONEL 718 (IN718), nickel superalloy. To characterise wear, the process prediction which contributes to it must be identified and quantified. First, material characterisation was carried out using the Gleeble physical materials simulator. Then a …

    birmingham Download PDF for Investigation of die wear by modelling the extrusion of Inconel 718 (opens in a new tab)

  14. Fretting fatigue Behaviour of Inconel 718 at room and high Temperature

    This thesis analyses the fatigue behaviour of Inconel 718, a Nickel-Chromium-based superalloy known for its excellent mechanical properties and high resistance to corrosion and oxidation, even at elevated temperatures. The study combines experimental testing and numerical simulations in order to …

    sevilla Repository record for Fretting fatigue Behaviour of Inconel 718 at room and high Temperature (opens in a new tab)

Page 1 of 12