Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 103 for “"Incremental dynamic analysis"”.

  1. Using Incremental Dynamic Analysis to Visualize the Effects of Viscous Fluid Dampers on Steel Moment Frame Drift

    … drift in steel moment frames, and the use of incremental dynamic analysis as a method of visualizing the behavior of these moment frames when subjected to seismic load effects. Models of three story and nine story steel moment frames were designed to meet typical strength requirements for …

    vt Repository record for Using Incremental Dynamic Analysis to Visualize the Effects of Viscous Fluid Dampers on Steel Moment Frame Drift (opens in a new tab)

  2. Use of Incremental Dynamic Analysis to Assess the Performance of Steel Moment-Resisting Frames with Fluid Viscous Dampers

    … thesis presents the results of a study that uses Incremental Dynamic Analysis to assess the seismic performance of steel moment-resisting frames with fluid viscous dampers subjected to earthquake ground motions. The study systematically investigated the effects of linear and nonlinear dampers on …

    vt Repository record for Use of Incremental Dynamic Analysis to Assess the Performance of Steel Moment-Resisting Frames with Fluid Viscous Dampers (opens in a new tab)

  3. Effect of Variation of the Systemic Parameters on the Structural Response of Single Degree of Freedom Systems Subjected to Incremental Dynamic Analysis

    … of single degree of freedom systems subjected to Incremental Dynamic Analysis. The systemic parameters are mass, stiffness, damping, yield strength and geometric stiffness. Each of these parameters was varied one at a time while the other values were kept constant. For each variation of parameters …

    vt Repository record for Effect of Variation of the Systemic Parameters on the Structural Response of Single Degree of Freedom Systems Subjected to Incremental Dynamic Analysis (opens in a new tab)

  4. Flexural Behavior of Interlocking Compressed Earth Block Shear Walls Subjected to In-Plane Loading

    … flexure dominant ICEB walls: a nonlinear static analysis model assuming lumped plasticity and a plastic analysis model. In addition, incremental dynamic analysis was conducted to address the seismic performance of flexure dominant ICEB buildings. Based on the database from the incremental dynamic …

    calpoly Repository record for Flexural Behavior of Interlocking Compressed Earth Block Shear Walls Subjected to In-Plane Loading (opens in a new tab)

  5. Nonlinear Dynamic Analysis of Structures with Hyperelastic Devices

    … with hyperelastic bracing using nonlinear and incremental dynamic analysis. New analytical software is implemented in the investigation of the structure, and the study seeks to investigate the effectiveness of hyperelastic bracing as a seismic protection device. Hyperelastic braces incorporate …

    vt Repository record for Nonlinear Dynamic Analysis of Structures with Hyperelastic Devices (opens in a new tab)

  6. Seismic Performance of concrete buildings reinforced with superelastic shape memory alloy rebars

    … of Western Canada. Nonlinear static pushover analysis and incremental dynamic analysis, (IDA) considering 20 earthquake records were performed to determine the best distribution of SMA rebars and investigate the seismic performance factors (SPFs). The best distribution of SMA rebars was …

    ubc Repository record for Seismic Performance of concrete buildings reinforced with superelastic shape memory alloy rebars (opens in a new tab) Download PDF for Seismic Performance of concrete buildings reinforced with superelastic shape memory alloy rebars (opens in a new tab)

  7. Numerical modeling for the seismic response of concrete tilt-up buildings

    … specifically to study the nonlinear static and dynamic behaviour of concrete tilt-up buildings. A typical tilt-up building designed in the study of Olund (2009) was modeled. Incremental dynamic analysis was performed using the developed finite element software to assess the seismic performance …

    ubc Repository record for Numerical modeling for the seismic response of concrete tilt-up buildings (opens in a new tab) Download PDF for Numerical modeling for the seismic response of concrete tilt-up buildings (opens in a new tab)

  8. Optimized design of steel structures under seismic loading

    … goal is the examination of the accuracy of the incremental dynamic analysis (IDA) method and secondly to investigate the practicality of using of IDA within a structural optimization procedure. Incremental dynamic analysis involves a series of nonlinear response history analyses with a suite of …

    greece Repository record for Optimized design of steel structures under seismic loading (opens in a new tab)

  9. Fragility Assessment of Combined Heavy Timber-Steel Bracing System Through Hybrid Simulation

    … sixty five hybrid tests are performed through incremental dynamic analysis and fragility curves are developed to estimate the probability of damage at varying seismic intensities. The prototype structure is assessed at various performance levels including design and maximum credible hazard …

    carleton Repository record for Fragility Assessment of Combined Heavy Timber-Steel Bracing System Through Hybrid Simulation (opens in a new tab)

  10. Rapid Spatial Distribution Seismic Loss Analysis for Multistory Buildings

    … a conservative approach. A new loss analysis approach is thus recommended that incorporates the effects of spatial distribution of earthquake induced damage to frame buildings. Moreover, the approach aims to discriminate between required repair and replacement damages. Suites of …

    tamu Repository record for Rapid Spatial Distribution Seismic Loss Analysis for Multistory Buildings (opens in a new tab)

  11. Evaluation of Strength Reduction Factor for Concentrically Braced Frames Based on Nonlinear Single Degree-of-Freedom Systems

    … Concentrically Braced Frame (CBF) under incremental dynamic analysis over a suite of ground motions. Parameters of the study include brace slenderness, fundamental frequency, increment resolution, FEM mesh refinement, effects of leaning columns, and effects of low-cycle fatigue. Results …

    calpoly Repository record for Evaluation of Strength Reduction Factor for Concentrically Braced Frames Based on Nonlinear Single Degree-of-Freedom Systems (opens in a new tab)

  12. Ultimate Limit State Response of Reinforced Concrete Columns for Use in Performance-Based Analysis and Design

    … are established using a rigorous computational analysis, and a limit analysis is used to derive simplified design and analysis equations. The derived buckling models are incorporated into wellestablished sectional analysis routines to predict full member behavior, and the application of these …

    tamu Repository record for Ultimate Limit State Response of Reinforced Concrete Columns for Use in Performance-Based Analysis and Design (opens in a new tab)

  13. Collapse Assessment of Steel Plate Shear Walls

    … and composite SPSWs, nonlinear static pushover analysis and incremental dynamic analysis (IDA) have been performed on all archetypes using OpenSees following the procedure presented in FEMA P695. Quantification of seismic parameters of stiffened and composite SPSWs, including period-based …

    concordia Download PDF for Collapse Assessment of Steel Plate Shear Walls (opens in a new tab)

  14. Development of a novel self-centering balloon-type CLT shear wall system for tall buildings

    … nonlinear time history analyses as well as to an incremental dynamic analysis. The results of these various analyses demonstrate that the DSCWs of the prototype building achieve the target roof displacements and performance objectives. The results also show that the DSCWs meet the seismic …

    ubc Repository record for Development of a novel self-centering balloon-type CLT shear wall system for tall buildings (opens in a new tab) Download PDF for Development of a novel self-centering balloon-type CLT shear wall system for tall buildings (opens in a new tab)

  15. Assessment of Floor Accelerations in Yielding Buildings

    … models of four steel moment frame buildings. The incremental dynamic analysis method is employed to evaluate the floor response of inelastic steel moment frame buildings subjected to all three components of a suite of 21 ground motions. To better understand the acceleration demands on …

    unr Repository record for Assessment of Floor Accelerations in Yielding Buildings (opens in a new tab)

  16. Effects of long duration ground motions on the probability of drift exceedance for reinforced concrete frames near the Cascadia Subduction Zone

    … in the Seismic Retrofit Guidelines 2nd Edition, incremental dynamic analysis is conducted to investigate discrepancies in the probability of drift exceedance for certain building types under both crustal and subduction ground motion records. These ground motions are selected and scaled to match …

    ubc Repository record for Effects of long duration ground motions on the probability of drift exceedance for reinforced concrete frames near the Cascadia Subduction Zone (opens in a new tab) Download PDF for Effects of long duration ground motions on the probability of drift exceedance for reinforced concrete frames near the Cascadia Subduction Zone (opens in a new tab)

  17. Seismic Assessment of Unreinforced Masonry Buildings In Canada

    … more refined assessments, followed by refined analysis of individual critical buildings. The current seismic screening procedure, from 1992, is based on qualitative observations of seismic vulnerability, enabling the assignment of seismic priority indices, quantified on the basis of expert …

    ottawa-retro Repository record for Seismic Assessment of Unreinforced Masonry Buildings In Canada (opens in a new tab)

  18. Seismic fragility analysis of reinforced masonry buildings

    … increased over the range interest, i.e. an incremental dynamic analysis (IDA) was performed. Finally, as mentioned the information obtained from the IDA was used to develop fragility curves for the in-plane and out-of-plane walls based on peak story drift limits defined in ASCE 41 for …

    colostate Repository record for Seismic fragility analysis of reinforced masonry buildings (opens in a new tab)

  19. Effects of ground motion duration on the seismic performance and collapse capacity of timber structures

    … same response spectra were used for nonlinear dynamic analyses of the model structures. Their collapse capacity was evaluated using fragility curves developed by incremental dynamic analysis. The results showed the collapse rate increased under long duration shaking due to a large number of …

    ubc Repository record for Effects of ground motion duration on the seismic performance and collapse capacity of timber structures (opens in a new tab) Download PDF for Effects of ground motion duration on the seismic performance and collapse capacity of timber structures (opens in a new tab)

  20. SEISMIC RESPONSE ASSESSMENT AND RECOMMENDATIONS FOR THE DESIGN OF SKEWED HIGHWAY BRIDGES

    … were presented. Finally, nonlinear time history analysis was used to generate system fragility functions for a range of three-span highway bridges (straight, moderate skew, and significant skew). It is shown that simplified beam-stick models have the capability to capture the nonlinear time …

    unr Repository record for SEISMIC RESPONSE ASSESSMENT AND RECOMMENDATIONS FOR THE DESIGN OF SKEWED HIGHWAY BRIDGES (opens in a new tab)

Page 1 of 6