Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Indentation size effect"”.

  1. A Study of the Indentation Size Effect in Copper

    … screw dislocations is developed to evaluate the size of the containment zone of the geometrically necessary dislocations as it relates to the indentation size effect. The model as developed predicts the same functional form as the Nix-Gao model, …

    utk-theses Repository record for A Study of the Indentation Size Effect in Copper (opens in a new tab)

  2. Microstructural Characterization of Shear Transformation Zones and Modeling Indentation Size Effect in Amorphous Polymers

    … patches induced by shear. Employing Nanoindentation and Atomic Force Microscopy (AFM), the micromechanical and microgeometrical properties of STZs are obtained for different polymers. Moreover, since the nucleation of STZs strongly depends on the initial microstructural state of the …

    lsu-thes Repository record for Microstructural Characterization of Shear Transformation Zones and Modeling Indentation Size Effect in Amorphous Polymers (opens in a new tab)

  3. Influences of sample preparation on the indentation size effect and nanoindentation pop-in on nickel

    … the influences of sample preparation on the indentation size effect (ISE) and nanoindentation pop-in behavior in nickel. The Ni (100) surface was prepared by electropolishing and then damaged in a controlled way by polishing with alumina slurry. The damaged layer was systematically removed in …

    utk-theses Repository record for Influences of sample preparation on the indentation size effect and nanoindentation pop-in on nickel (opens in a new tab)

  4. An Examination of the Indentation Size Effect In FCC Metals and Alloys from a Kinetics Based Perspective Using Nanoindentation

    The indentation size effect (ISE) in metals is described as the rise in hardness with decreasing depth of indentation and contradicts conventional plasticity behavior. The goal of this dissertation is to further examine the fundamental dislocation mechanisms that may be contributing to the …

    odu Repository record for An Examination of the Indentation Size Effect In FCC Metals and Alloys from a Kinetics Based Perspective Using Nanoindentation (opens in a new tab)

  5. A Conventional Theory of Mechanism-Based Strain Gradient Plasticity

    CMSG is also used to study the indentation size effect (ISE) observed in micro and nanoindentation experiments. Different hardness trends with different indenter shapes obtained from CMSG agree very well with the experimental measurement.

    uiuc Repository record for A Conventional Theory of Mechanism-Based Strain Gradient Plasticity (opens in a new tab)

  6. NANOHARDNESS OF VITREOUS SILICA: EFFECTS OF ENVIRONMENTAL HUMIDITY, INTERNAL WATER CONTENT AND INDENTATION SIZE

    … durability and fine mechanical properties. The indentation technique is one of the most common and useful methods to measure the mechanical properties of glasses. Since an advanced indentation technique, nanoindentation, was developed in the 1980’s, vitreous silica has been used as the …

    cornell Repository record for NANOHARDNESS OF VITREOUS SILICA: EFFECTS OF ENVIRONMENTAL HUMIDITY, INTERNAL WATER CONTENT AND INDENTATION SIZE (opens in a new tab)

  7. Novel Nanoindentation-Based Techniques for MEMS and Microfluidics Applications

    … been discussed. In chapter1 and chapter 2, the Indentation Size Effect (ISE) has been studied for single crystal aluminum and the substrate effect has also been studied for 200 nm gold film on mica substrate and 50 nm gold film on (100) silicon wafer substrate. The mechanical characterization of …

    usf Repository record for Novel Nanoindentation-Based Techniques for MEMS and Microfluidics Applications (opens in a new tab)

  8. Bewertung von Verfahren zur Fließspannungsbestimmung in der Nanoindentation

    Die Nanoindentation ist ein inzwischen etabliertes Verfahren zur Bestimmung der Materialkennwerte Härte und Elastizitätsmodul in kleinen Größendimensionen. Eine zusätzliche Bestimmung der Fließspannung aus solchen Nanoindentationsexperimenten würde deren Einsatzmöglichkeiten deutlich erweitern und …

    qucosa-diss

  9. Effects of Thickness and Indenter Tip Geometry in Nanoindentation of Nickel Films

    Nanoindentation has become a widely used technique to measure the mechanical properties of materials. Due to its capability to deform materials in micro- and nano-scale, nanoindentation has found more applications in characterizing the deformation behavior and determining the mechanical properties …

    unt Repository record for Effects of Thickness and Indenter Tip Geometry in Nanoindentation of Nickel Films (opens in a new tab)

  10. Correlating Acoustic Emissions to Cracking in Silicon Carbide Micro-Indentations

    … can be detected at the micro-scale through micro-indentation. In theory, acoustic emissions can be used as a diagnostic tool to determine crack network extent in brittle materials. Using (0001) silicon carbide single crystal as a test system, Vicker's micro-indentation was used to initiate …

    alabama Repository record for Correlating Acoustic Emissions to Cracking in Silicon Carbide Micro-Indentations (opens in a new tab)

  11. On the Measurement of Yield Strength by Spherical Indentation

    … the yield strength of metals using instrumented indentation experiments performed with a sphere [1-6]. Among the proposed methods that are easy to implement experimentally and do not require any additional novel characterization techniques or proprietary software analysis are those of Field and …

    ut-knoxville Repository record for On the Measurement of Yield Strength by Spherical Indentation (opens in a new tab)

  12. Micromechanics, microstructure and formation of zirconium hydrides in nuclear fission applications

    … and fracture toughness. This detrimental effect of hydrogen embrittlement is critically dependent on the morphology of hydrides in microscale and the Zr/hydride dual-phase microstructure. In this work Zr hydride thin film samples were prepared for microstructural and micromechanical …

    oxford Repository record for Micromechanics, microstructure and formation of zirconium hydrides in nuclear fission applications (opens in a new tab)

  13. Scale-Dependent Plasticity And Nanoindentation Creep Of Geologic Materials

    Nanoindentation is a commonly used technique in materials science that allows for the determination of the mechanical properties (e.g. hardness, elastic modulus, and creep) of single crystals and polycrystalline aggregates, but it has been severely underutilized for the study of geologic materials. …

    penn Repository record for Scale-Dependent Plasticity And Nanoindentation Creep Of Geologic Materials (opens in a new tab)

  14. MECHANICAL DEFORMATION AND STRENGTHENING MECHANISMS IN CALCITE SINGLE CRYSTALS

    … a pure control calcite crystal, and small-scale indentation testing suggests that even the single-crystals of calcite that make up these structures may be significantly harder than a pure control. The exact mechanisms of the increased hardness are not known, thus there is much interest in …

    cornell Repository record for MECHANICAL DEFORMATION AND STRENGTHENING MECHANISMS IN CALCITE SINGLE CRYSTALS (opens in a new tab)

  15. ELECTROMECHANICAL INTERACTION ON THE DEFORMATION BEHAVIOR OF METALLIC MATERIALS

    … on the electric current density. Using the nanoindentation technique, the effect of electric current on the indentation deformation of copper and tin was studied. The reduced contact modulus of copper and tin decreased with increasing the electric current density. With the passage of a DC …

    uky-thes Repository record for ELECTROMECHANICAL INTERACTION ON THE DEFORMATION BEHAVIOR OF METALLIC MATERIALS (opens in a new tab)

  16. Mechanical Testing and Characterization of Proton Irradiated 99.4% NI Using the Reactor Materials Testing Laboratory

    … damage mechanisms versus phase transformation effects that are exhibited in X-750 from γ’ precipitates and disordered phases. Cross-sectional nano-indentation showed an increase in hardness with increasing dpa from proton irradiation. The Nix-Gao (NG) model, a strain gradient plasticity model, …

    queens Repository record for Mechanical Testing and Characterization of Proton Irradiated 99.4% NI Using the Reactor Materials Testing Laboratory (opens in a new tab)

  17. Size Effects in Additively Manufactured Inconel-718 Thin Elements and Cellular Structures

    … these structures without considering the effect of the element thickness and heterogeneous printing parameters on the resulting material behavior. To advance the application of laser powder bed fusion (LPBF), an AM process, in producing Inconel718 (IN718) complex shaped parts and cellular …

    lsu-thes Repository record for Size Effects in Additively Manufactured Inconel-718 Thin Elements and Cellular Structures (opens in a new tab)

  18. Constitutive Modeling and Experiments for the Micro and Nano Behaviors in Metals

    … constitutive modeling and experiments. The size effect encountered during nanoindentation experiments, which is known as indentation size effect (ISE), is investigated for metal materials. The ISE is believed to be related with the strain gradient at small indentation depths. Geometrically …

    lsu-thes Repository record for Constitutive Modeling and Experiments for the Micro and Nano Behaviors in Metals (opens in a new tab)

  19. Time-Dependent Plastic Deformation Of Mg Nanocomposites: Ambient And Elevated Temperature Assessments

    … characterized. In the present project, the nanoindentation technique was used to assess the creep and hardness response of pure Mg and Mg reinforced with 0.25, 0.5, and 0.75 vol.% CNTs at room and elevated (373, 473, and 573 K) temperatures. This work has shown that CNTs improve strength and …

    nodak Repository record for Time-Dependent Plastic Deformation Of Mg Nanocomposites: Ambient And Elevated Temperature Assessments (opens in a new tab)

  20. Πειραματική και θεωρητική μελέτη μηχανικών ιδιοτήτων και φαινομένων μεγέθους σε νανοδομές και λεπτά υμένια

    … the samples were studied by nanoindentation experiments with a wide range of loads between 1 to 500mN in order to be able to calculate the nano-mechanical properties (elastic modulus and hardness) of the two different types of systems. The results for the two different types of …

    greece Repository record for Πειραματική και θεωρητική μελέτη μηχανικών ιδιοτήτων και φαινομένων μεγέθους σε νανοδομές και λεπτά υμένια (opens in a new tab)

Page 1 of 2