Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 112 for “"Indentation tests"”.
-
Development of an inverse FE modelling method for material parameters identification based on indentation tests
… investigated. FE models simulating the indentation process of three typical material behaviours have been developed and some important factors including mesh sensitivity, frictional conditions and material properties have been systematically studied to validate the FE models. The use of …
-
Estimating the yield stress in aluminum alloys using instrumented spherical indentation
Instrumented indentation tests using a spherical indenter are a potential source to obtain mechanical properties from small samples and also to obtain localized mechanical properties within a sample. Thus, the data obtained from indentation tests would provide valuable insights into the mechanical …
-
The use of plasticity theory in predicting the deformational behavior of ice and sand-ice systems
Results of triaxial and indentation tests on ice and sand-ice samples are reported. The main parameters studied in the triaxial tests were temperature (-12 to 35°F), confining pressure (atmospheric to 4, psi), and loading rate (2.5 - 25 psi/sec). All of the indentation tests were conducted at …
-
Deformation Behavior of Bulk Metallic Glasses and High Entropy Alloys by Nanoindentation
<p>Nanoindentation has become a powerful tool in the measurement of the mechanical properties of diverse materials, such as metallic materials, polymer materials, and even biomaterials.</p> <p>In this thesis, three types of Zr-based bulk metallic glasses (BMGs) were investigated by nanoindentation. …
-
Natural and induced anistropy in rocks under plastic conditions
… to investigate the effect of anistropy on wedge indentation tests. These tests are used to qualitatively investigate the deviation forces encountered when drilling through an anisotropic medium. The preliminary investigation of anisotropic rocks lead to the study of an elastic - linear hardening …
-
Mechanical and viscoelastic properties of materials by instrumented indentation
… bulk material. Instrumented, or ultra-low load, indentation instruments are capable of measuring the elastic, plastic and time-dependent properties of small volumes of materials. A two stage area model has been developed to predict the variation in measured hardness with depth of penetration for …
-
Methods to improve the PVD coatability of brass by using diffusion barriers.
… CuAl8-Nb and Nb.Scratch adhesion and Rockwell indentation tests are found not to be directly applicable to the system of soft brass and ductile coating(s). Therefore a new classification for both scratch and indentation tests was defined. The best adhesion was shown by the CuA18 coatings on …
-
Numerical and experimental studies of shallow cone penetration in clay
… was adopted for analysis of continuous cone indentation. Quasi-static analyses using an elastoplastic Tresca material model are used to obtain bearing capacity factors for shallow cone penetration, taking account of the material displaced, for various cone apex angles and adhesion factors. …
-
Rock toughness and disc cutting
"Several series of tests were conducted in samples of six rocks to determine the relationship of various common parameters used to predict TBM performance, in response to an inquiry into the nature of rock toughness and how it affects mechanical rock fragmentation. To investigate toughness, …
-
Contact Mechanics Based Mechanical Characterization of Portland Cement Paste
… the material, particularly the C-S-H phase. Nanoindentation is evaluated as a tool for measuring both the instantaneous and the short-term viscoelastic properties of cement paste. Atomic force microscopy (AFM) based indentation is compared to conventional nanoindentaion in measuring mechanical …
-
Multi-Scale Nanoindentation For Characterization Of Oil Shales
… effects of polishing techniques, scale of nanoindentation, and petrophysical properties were conducted on both Woodford and Tuscaloosa Marine Shale. Polishing procedures include both an in-house developed, mechanical sample preparation protocol as well as ion beam milling. The elastic modulus …
-
Characterizing the mechanical, transport and adhesion properties of hydrogels using indentation method
… all important properties to characterize. The indentation method is practically suitable for hydrogels, but extracting material properties from indentation tests on hydrogels is still challenging, especially at a small length scale. There is a need to establish a set of indentation methods that …
-
Simulations of Indentation at Continuum and Atomic levels
… isotropic and cubic materials through indentation tests on thin layers bonded to rigid substrates. Accordingly, we first use the Stroh formalism to provide an analytical solution for generalized plane strain deformations of a linear elastic anisotropic layer bonded to a rigid substrate, …
-
Cleavage fracture assessment incorporating strain gradient plasticity
… length scale of the structural steels by the indentation tests. With the obtained material length scale, this thesis further shows that the CMSG plasticity theory could provides drastically different estimation of the near-tip crack opening displacement, implying the plastic strain gradient …
-
Micro-Raman Spectroscopy And Dry Turning Evaluations Of Nanostructured Diamond Films Deposited On Tungsten-Carbide Lathe Inserts
… to correlate nanodiamond film performance to indentation tests and Raman spectroscopy. Raman results indicate that specifically the peak at 1556 cm-1 is detrimental to film lifespan and that a higher concentration of nanodiamond as evident in the 1136 cm-1 peak is beneficial for a longer …
-
Assessing Composite and Fibre Metal Laminate Materials for Automotive Applications Through Impact and Quasi-Static Indentation Testing
… Low-velocity impact (LVI) and quasi-static indentation (QSI) testing was conducted on thin composite and FML panels to assess their applicability in impact prone automotive components. To aide in the impact assessment of the lightweight materials a novel approach was developed to determine …
-
Indentation and penetration of a spherical elastic membrane filled with fluid
… the mechanical properties of biological cells by indentation tests to predicting the deformed shape of a large commercial tent structure. In this work, direct membrane theory and a particular Varga strain energy function are used to model the indentation and puncturing of an isotropic spherical …
-
Synthesis and Characterization of Three Dimensional Nanostructures Based on Interconnected Carbon Nanomaterials
… which have high elasticity under nano-indentation tests. This allows the CNT spheres to be potentially applied to mechanical dampers. CNTs were also grown on two dimensional materials--such as reduced graphene oxide (rGO) and hexagonal boron nitride (h-BN)--by CVD methods, which are …
Page 1 of 6