Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Indirect Tension"”.

  1. Modeling and Simulation of Damage In The Brazilian Indirect Tension Test Using The Finite-Discrete Element Method

    The Brazilian indirect tension test is used to investigate possible correlations between progressive damage and associated permeability changes. The test offers ease of replicability with a damage behavior known to lead to fracture openings as a tool for interpreting the indirect tensile strength …

    unm Repository record for Modeling and Simulation of Damage In The Brazilian Indirect Tension Test Using The Finite-Discrete Element Method (opens in a new tab)

  2. Monitoring Damage Occurrence, Post-Peak Crack Propagation and Air Permeability in Concrete Using the Brazilian Indirect Tension Test

    … behavior of concrete using the Brazilian tension test by slowing crack propagation while concurrently measuring permeability and monitoring damage propagation using acoustic emission techniques. The modified Brazilian test method utilizes spring supports in parallel to the test specimen to …

    unm Repository record for Monitoring Damage Occurrence, Post-Peak Crack Propagation and Air Permeability in Concrete Using the Brazilian Indirect Tension Test (opens in a new tab)

  3. Analysis of Hot Mix Asphalt (HMA) Linear Viscoelastic and Bimodular Properties Using Uniaxial Compression and Indirect Tension (IDT) Tests

    … to predict rutting and fatigue cracking, and the Indirect Tension (IDT) creep compliance test to predict low-temperature thermal cracking. The creep compliance and dynamic modulus are measured responses (viscoelastic functions) of viscoelastic materials under transient and cyclic loading, …

    vt Repository record for Analysis of Hot Mix Asphalt (HMA) Linear Viscoelastic and Bimodular Properties Using Uniaxial Compression and Indirect Tension (IDT) Tests (opens in a new tab)

  4. Performance evaluation of coarse-graded field mixtures using dynamic modulus results gained from testing in indirect tension mode of testing

    … to predict its performance and service life. The indirect tension mode can measure the dynamic modulus of each layer of field cores without the dimensional requirement, e.g. a height of 6-inch is required for the traditional uniaxial test mode. Within this research work, performance evaluation …

    iastate Repository record for Performance evaluation of coarse-graded field mixtures using dynamic modulus results gained from testing in indirect tension mode of testing (opens in a new tab)

  5. Evaluation of Poisson’s Ratio of Asphalt Concrete

    … using two different testing configurations: indirect tension (IDT) and uniaxial. However, results from these two testing configuration can potentially have differences. Design methodologies such as the Mechanistic Empirical Design Guide (MEPDG, now PavementME) have been shown to be very …

    arkansas Repository record for Evaluation of Poisson’s Ratio of Asphalt Concrete (opens in a new tab)

  6. Effect on compaction effort on SuperPave surface course materials.

    … potential with Asphalt Pavement Analyzer and Indirect Tension test. Only gyration level and binder percent were changed. Lower compaction effort resulted in an increased binder content of 0.4 to 0.6 percent. No statistically significant rutting potential was found with the lowered compaction …

    wvu Repository record for Effect on compaction effort on SuperPave surface course materials. (opens in a new tab)

  7. Effect of compaction effort on SuperPave base course materials

    … potential with Asphalt Pavement Analyzer and Indirect Tension test. Only gyration level and binder percent were changed. Lower compaction effort resulted in an increased binder content. The 19mm mixes showed an increased rutting potential. However, investigation of the data demonstrated …

    wvu Repository record for Effect of compaction effort on SuperPave base course materials (opens in a new tab)

  8. Strength characteristics of mortars containing dispersed fibrous reinforcement

    … material was subjected to both direct and indirect tension, unconfined compression, and flexure. Increases in strength were noted for the composite material over the plain mortar in all cases but a few of the compression tests. The maximum gain in strength was slightly over one-hundred …

    rice Repository record for Strength characteristics of mortars containing dispersed fibrous reinforcement (opens in a new tab)

  9. Exploring the Black Space of Compressive and Shear Modulus

    … Three tests were performed: Uniaxial |E*|, Indirect Tension (IDT |E*|), and Torsion Bar |G*|. Traditional Master Curves and Black Space diagrams were plotted to have a comparison between all materials. The results show that Black Space diagram plotted with the Torsion Bar |G*| configuration …

    arkansas Repository record for Exploring the Black Space of Compressive and Shear Modulus (opens in a new tab)

  10. Permeability of hot mix asphalt concrete as affected by binder content

    … (FDOT) style permeameter. Gyratory and indirect tension (IDT) strength test data were also used to evaluate the effect binder has on compaction and rutting resistance.;This research suggests several changes to West Virginia's construction specifications, including permeability testing as …

    wvu Repository record for Permeability of hot mix asphalt concrete as affected by binder content (opens in a new tab)

  11. An evaluation of electrically conductive asphalt mixtures for electrically heated flexible pavement systems

    … Wheel Tracking Device, Semi-Circular Bend, Indirect Tension Cracking Test, and Cantabro loss tests. The results revealed that graphite improves the electrical conductivity of asphalt mixtures when introduced at dosages of 10 to 15% or higher by volume of binder. Graphite-modified mixtures …

    rowan Repository record for An evaluation of electrically conductive asphalt mixtures for electrically heated flexible pavement systems (opens in a new tab)

  12. A laboratory investigation of high polymer modified asphalt mixtures with softening agent

    … Wheel Tracking Device (HWTD), Flow Number (FN), Indirect Tension Cracking Test (IDEAL-CT), Semi-Circular Bend (SCB), Disk-Shaped Compact Tension (DCT), and Cantabro Durability tests. The impact of aging on cracking resistance was also evaluated by subjecting all mixes to short-, long, and …

    rowan Repository record for A laboratory investigation of high polymer modified asphalt mixtures with softening agent (opens in a new tab)

  13. Development of hot mix asphalt using fractionated coarse and fine reclaimed asphalt pavement (RAP) and pulp aramid fiber (PAF) for cold climate

    … tests and thermomechanical tests such as tension-compression fatigue tests, thermal cracking resistance (TSRST), rutting resistance, indirect tension test, complex modulus tests and dynamic shear rheometer test were used to characterize the bitumens and the mix. The 2S2P1D rheological …

    ets-quebec Download PDF for Development of hot mix asphalt using fractionated coarse and fine reclaimed asphalt pavement (RAP) and pulp aramid fiber (PAF) for cold climate (opens in a new tab)

  14. The Investigation of Cold-mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses and Gradations

    … scale tests were compared to the traditional Indirect Tension Test (IDT) testing. In order to fully evaluate the two reduced sample size test methods, this research observed the effect of gradation, temperature, emulsifier type, and Recycled Asphalt Pavement (RAP) content on creep stiffness. …

    arkansas Repository record for The Investigation of Cold-mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses and Gradations (opens in a new tab)

  15. Comparison of Creep Compliance Master Curve Models for Hot Mix Asphalt

    … used in this thesis; uniaxial compressive and indirect tension (IDT) creep compliance. The tests were conducted at five temperatures (-15, 5, 20, 30, and 40°C) with a static loading for 1000-sec to characterize two typical HMA mixes used in Virginia, a base and a surface mix. Creep compliance …

    vt Repository record for Comparison of Creep Compliance Master Curve Models for Hot Mix Asphalt (opens in a new tab)

  16. Quantification of the Role of The Effective Binder in the Performance of RAP – WMA Mixtures

    … was used for cracking evaluation, while the Indirect Tension Test at High Temperatures (IDT-HT) was used for rutting evaluation. Further, the study included rheological characterization of extracted binder from the mixtures to investigate the role of the effective binder on cracking …

    temple Repository record for Quantification of the Role of The Effective Binder in the Performance of RAP – WMA Mixtures (opens in a new tab)

  17. Laboratory Evaluation of Hot-Mix Asphalt Concrete Fatigue Cracking Resistance

    … test methods: the Overlay Tester (OT), Direct Tension (DT), Indirect Tension (IDT), and Semicircular Bending (SCB) tests were comparatively evaluated for their potential application as surrogate tests for routine fracture resistance evaluation and screening of HMA mixes in the laboratory. The …

    tamu Repository record for Laboratory Evaluation of Hot-Mix Asphalt Concrete Fatigue Cracking Resistance (opens in a new tab)

  18. A new generation of sustainable composite materials for structural strengthening: expiremental and analytical study

    … beam configuration, which subjected the TRM to indirect tension. The aim was to evaluate the bond strength and effective bond length of each TRM system. A complementary analytical model of the bond behaviour was also developed. The third part of the investigation attempted to use the newly …

    greece Repository record for A new generation of sustainable composite materials for structural strengthening: expiremental and analytical study (opens in a new tab)

  19. The Effect of Loading Conditions and Specimen Size on the Tensile Strength of Ring-Shaped Specimens

    This study introduces a custom-built direct tension testing apparatus designed for ring-shaped rock specimens. The apparatus applies a uniform axial load to the inner surface of the ring and is compatible with standard geotechnical testing equipment. Using this device, 176 granite specimens sourced …

    boise Repository record for The Effect of Loading Conditions and Specimen Size on the Tensile Strength of Ring-Shaped Specimens (opens in a new tab)

  20. Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials

    … stabilizer contents were determined using the indirect tensile strength test for asphalt emulsion and asphalt foam stabilization and the unconfined compressive strength test was used for the cement stabilized samples. Once the mix designs were validated and optimal contents were determined, …

    arkansas Repository record for Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials (opens in a new tab)

Page 1 of 2