Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"Indirect Tension Test"”.
-
Modeling and Simulation of Damage In The Brazilian Indirect Tension Test Using The Finite-Discrete Element Method
The Brazilian indirect tension test is used to investigate possible correlations between progressive damage and associated permeability changes. The test offers ease of replicability with a damage behavior known to lead to fracture openings as a tool for interpreting the indirect tensile strength …
-
Monitoring Damage Occurrence, Post-Peak Crack Propagation and Air Permeability in Concrete Using the Brazilian Indirect Tension Test
… evolution in concrete. A novel experimental test method is presented that enables monitoring post-peak cracking behavior of concrete using the Brazilian tension test by slowing crack propagation while concurrently measuring permeability and monitoring damage propagation using acoustic …
-
Effect on compaction effort on SuperPave surface course materials.
… construction. Two surface course mixes were tested by lowering compaction effort from 100 gyrations to 80 gyrations and evaluating rutting potential with Asphalt Pavement Analyzer and Indirect Tension test. Only gyration level and binder percent were changed. Lower compaction effort resulted …
-
Effect of compaction effort on SuperPave base course materials
… during construction. Two base course mixes were tested by lowering compaction effort from 100 gyrations to 80 gyrations for the 19mm mix and to 65 gyrations for the 37.5 mm mix and evaluating rutting potential with Asphalt Pavement Analyzer and Indirect Tension test. Only gyration level and …
-
Development of hot mix asphalt using fractionated coarse and fine reclaimed asphalt pavement (RAP) and pulp aramid fiber (PAF) for cold climate
… to HMA to study their effectiveness. Performance tests and thermomechanical tests such as tension-compression fatigue tests, thermal cracking resistance (TSRST), rutting resistance, indirect tension test, complex modulus tests and dynamic shear rheometer test were used to characterize the bitumens …
-
The Investigation of Cold-mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses and Gradations
Many current methods of designing and testing Cold In-Place Recycled (CIR) asphalt are undesirable because they require large amounts of material and significant preparation. In an effort to lessen the cost and time of materials testing, this research utilizes several different methods of small …
-
Quantification of the Role of The Effective Binder in the Performance of RAP – WMA Mixtures
… production factors. The Semi-Circular Bend (SCB) test at intermediate temperatures was used for cracking evaluation, while the Indirect Tension Test at High Temperatures (IDT-HT) was used for rutting evaluation. Further, the study included rheological characterization of extracted binder from the …
-
The deformation-failure characteristics of laminated sedimentary rocks
… strength reductions as high as 40% when the test specimen was cut at an angle of 20-30° to the bedding planes. The anisotropic shear failure theory (single plane of weakness theory) of Jaeger was applied to the laminated rocks tested; the Arkansas sandstone was found to follow this theory …
-
THE EFFECTS OF FUNDAMENTAL MIXTURE PARAMETERS ON HOT-MIX ASPHALT PERFORMANCE PROPERTIES
… gradations (fine-graded and coarse-graded) were tested from each aggregate source. Two levels of binder content and air voids content were used to represent the construction variability levels of binder content and density, respectively. The three aspects of mixture performance that were …