Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Indoor Propagation"”.

  1. Indoor propagation simulation software

    … used to predict the signal strength in complex indoor environments. Signal propagation prediction is essential for determining the coverage of WLAN's (Wireless Local Area Networks). Increasing use of WLANs within infrastructures that have been built prior to the installation of the wireless …

    nps Repository record for Indoor propagation simulation software (opens in a new tab)

  2. 3.5 GHz Indoor Propagation Modeling and Channel Characterization

    … band is new, there is a distinct shortage of propagation data and accurate channel modeling at 3.5 GHz in indoor environments. These models are necessary for cellular coverage planning and evaluating the performance and feasibility of wireless systems. This report presents the results of a …

    vt Repository record for 3.5 GHz Indoor Propagation Modeling and Channel Characterization (opens in a new tab)

  3. Indoor Propagation Modeling at 2.4 GHz for IEEE 802.11 Networks

    Indoor use of wireless systems poses one of the biggest design challenges. It is difficult to predict the propagation of a radio frequency wave in an indoor environment. To assist in deploying the above systems, characterization of the indoor radio propagation channel is essential. The …

    unt Repository record for Indoor Propagation Modeling at 2.4 GHz for IEEE 802.11 Networks (opens in a new tab)

  4. Characterization of the Spatial Distribution of the Electric Field Strength in Indoor Propagation at 2.45 GHz

    … strength or “fast fading” are encountered in indoor environments, and are of particular concern for indoor wireless communication applications as well as for electromagnetic compatibility assessment. This thesis is motivated by the problem of electromagnetic interference with a critical-care …

    concordia Download PDF for Characterization of the Spatial Distribution of the Electric Field Strength in Indoor Propagation at 2.45 GHz (opens in a new tab)

  5. Microwave Spread Spectrum Receiver for Indoor Applications

    … of a Microwave spread spectrum receiver for indoor applications is covered. The theory presented exhibits how a spread spectrum performs in the presence of intereference [sic] which is encountered in an indoor environment. Indoor propagation characteristics are analyzed and an equation …

    marquette Repository record for Microwave Spread Spectrum Receiver for Indoor Applications (opens in a new tab)

  6. Accurate and efficient full-wave modelling for indoor radio wave propagation

    … the wireless channel. Knowledge of radio wave propagation is vital to the continued development of efficient wireless communications systems capable of providing a high data throughput and reliable connection. Thus, there is an increased need for accurate propagation models that can rapidly …

    dcu Download PDF for Accurate and efficient full-wave modelling for indoor radio wave propagation (opens in a new tab)

  7. Indoor radio propagation and interference in 2.4 GHz wireless sensor networks: measurements and analysis

    … and lifetime are significantly affected by the indoor propagation and the interference from other technologies using the 2.4 GHz band. Next to an overview of the propagation and coexistence issues in the literature, we present a model for analyzing these effects in WSNs. We also present our …

    eindhoven Repository record for Indoor radio propagation and interference in 2.4 GHz wireless sensor networks: measurements and analysis (opens in a new tab)

  8. Prediction of wireless communication systems performance in indoor applications

    … in wireless applications, from outdoor to indoor environments. new modelling solutions had to be designed to account for the immense complexity of the latter. Essentially, two categories of indoor propagation models prevailed until the mid-90's: the Empirical and the Physical models. They …

    nps Repository record for Prediction of wireless communication systems performance in indoor applications (opens in a new tab)

  9. Microwave Intra-Building Transmission Using Spread Spectrum

    … transmitter at 915 MHz for use in an indoor communication system for building automation control is presented. The transmitter utilizes a phase-reversal keying to modulate the carrier at a chipping rate of 5 MHz. The theory presented develops a description of all the signals present in …

    marquette Repository record for Microwave Intra-Building Transmission Using Spread Spectrum (opens in a new tab)

  10. Propagation and performance analysis for a 915 MHz wireless IR image transfer system

    … and building walls were examined to assess indoor propagation capabilities. Data transmission through random trees, buildings, foliage under various atmospheric conditions is also evaluated for outdoor system capabilities. A maximum free space range for acceptable IR image transferring is …

    nps Repository record for Propagation and performance analysis for a 915 MHz wireless IR image transfer system (opens in a new tab)

  11. A feasibility study of intrabuilding wireless communications using low level nominal 60 GHz radiation

    The RF (radio frequency) aspect of an IWC (indoor wireless communication) system which operates in the 60 GHz range is designed and implemented. The overall system should be capable of providing indoor office communications for a maximum of 200 basic rate ISDN (integrated services digital network) …

    ubc Repository record for A feasibility study of intrabuilding wireless communications using low level nominal 60 GHz radiation (opens in a new tab) Download PDF for A feasibility study of intrabuilding wireless communications using low level nominal 60 GHz radiation (opens in a new tab)

  12. A Performance Analysis of a CSMA Multihop Packet Radio Network

    … has developed a packet radio network for an indoor wireless alarm system. At the start of the project, the effect of message collisions on system performance was unknown. As a result of this research, a collision model for the network has been developed for topologies of four, five, and six …

    vt Repository record for A Performance Analysis of a CSMA Multihop Packet Radio Network (opens in a new tab)

  13. Terrestrial radio wave propagation at millimeter-wave frequencies

    This research focuses on radio wave propagation at millimeter-wave frequencies. A measurement based channel characterization approach is taken in the investigation. First, measurement techniques are analyzed. Three types of measurement systems are designed, and implemented in measurement campaigns: …

    vt Repository record for Terrestrial radio wave propagation at millimeter-wave frequencies (opens in a new tab)

  14. A Simulator for analyzing the throughput of IEEE 802.11b Wireless LAN Systems

    … design should account for the limitations of the indoor propagation such as interference and multipath. The goal of this thesis is to develop a simulator which will predict the performance (throughput) of an end user. The throughput is predicted for a given topology and traffic source. The …

    vt Repository record for A Simulator for analyzing the throughput of IEEE 802.11b Wireless LAN Systems (opens in a new tab)

  15. Propagation Modelling using Iterative Physical Optics

    … Expansion are techniques that can model the wave propagation in a specific site. Although, these techniques work well, they exhibit some drawbacks that Iterative Physical Optics (IPO) technique can overcome. IPO can predict the wave propagation, by using the surface current of an object based on …

    bristol Repository record for Propagation Modelling using Iterative Physical Optics (opens in a new tab) Download PDF for Propagation Modelling using Iterative Physical Optics (opens in a new tab)

  16. Antenna Selection and Deployment Strategies for Indoor Wireless Communication Systems

    … for reducing co-channel interference in indoor wireless systems. Low-cost solutions are essential, and strategies that utilise simple antennas (such as directional patches) are advantageous from this perspective. However, performance is always an issue and the improvements achievable …

    auckland-ms Repository record for Antenna Selection and Deployment Strategies for Indoor Wireless Communication Systems (opens in a new tab)

  17. Ultra-Wideband Trained Artificial Neural Networks for Bluetooth Proximity Detection in Small Crowded Areas

    Estimating the distance between indoor users is increasingly important in unexpected ways. One specific example is the need for electronic contact tracing demonstrated during the recent global pandemic. Smartphones are now routinely equipped with Bluetooth Low Energy radios, among other sensors, …

    calgary Repository record for Ultra-Wideband Trained Artificial Neural Networks for Bluetooth Proximity Detection in Small Crowded Areas (opens in a new tab)

  18. Mechanistic modelling of single-floor office environments

    Engineering high performance indoor wireless communication systems requires sound system deployment strategies. In order to deploy systems effectively, propagation models that can reliably and yet efficiently characterise radio propagation behaviour are needed. This thesis describes the philosophy, …

    auckland-ms Repository record for Mechanistic modelling of single-floor office environments (opens in a new tab)

  19. An Energy Diffusion Model for Interior Acoustics with Structural Coupling Using the Laplace Transform Boundary Element Solution

    Knowledge of the indoor propagation of sound has many important applications including acoustic prediction in homes, office buildings, stores, and schools, and the design of concert halls, auditoriums, classrooms, and factories. At low frequencies, interior acoustics are analyzed with the wave …

    vt Repository record for An Energy Diffusion Model for Interior Acoustics with Structural Coupling Using the Laplace Transform Boundary Element Solution (opens in a new tab)

Page 1 of 2