Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Inductive charging"”.
-
Construction of an inductive charging station
An inductive charging station has been designed, constructed and is operational. It is able to transfer roughly 500W to the receiving side with a peak efficiency of approximately 85%. The system was fed with a voltage between 24 to 63V from a Direct Current (dc) supply. Then, it converted the dc …
-
Design of a universal inductive charging system for electric vehicles
A promising method for charging batteries of electric vehicles (EV) is inductive power transfer (IPT), also known as inductive charging. IPT, a convenient, safe, and aesthetic method of charging EVs, inductively transfers high-frequency AC power in the transmitting pad, or coil, to the receiving …
-
Secondary-Side Impedance Control Strategies for Inductive Charging of Electric Vehicles
Over the last few decades, inductive power transfer-based electric vehicle chargers have seen both a plethora of new developments and a marked increase in interest. However, a number of unresolved issues still remain to this day. One of these issues is how to resist large changes in the power …
-
Resonant power conversion topologies for inductive charging of electrical vehicle batteries
This thesis is concerned with inductive charging of electric vehicle batteries. Rectified power form the 50/60 Hz utility feeds a dc-ac converter which delivers high-frequency ac power to the electric vehicle inductive coupling inlet. The inlet configuration has been defined by the Society of …
-
Development of Intermediate Controllers for Inductive Charging Systems in Dynamic Roadway Systems
… charge. A perceived downside however is that EV charging stations besides roads and footpaths are unsightly and prone to weathering and vandalism. Inductive Power Transfer (IPT) is a technology which can allow energy to be transferred wirelessly and presents an attractive means to charge EVs …
-
Inductive charging for a self-balancing robot - Design and development of prototype
In this master’s thesis project an inductive power transfer (IPT) system is designed and developed. This IPT system should in the future be implemented in Aros Electronics self-balancing robot Glenn. The system can transfer 153 W over a 3 cm air gap with an efficiency of 84.5 %. Furthermore, the …
-
High efficiency inductive charging for electric mini-cars. System design and prototype development of a charging system.
… has several disadvantages compared to wireless charging. This thesis describes the simulation and development of an inductive charger to a small electric vehicle. The charger can transfer 700-950 W at an efficiency of 87 %, and 1100-1200 W at an efficiency of 84 %. Measurements shows that the …
-
Gaining a competitive advantage with sustainable business – implementing inductive charging using systems thinking, A Benchmarking of EVs and PHEVs.
… master thesis examines the implementation of inductive charging technology for cars, and discovers the competitive advantage gained by using a sustainable system approach in companies. Market research has shown that PHEV consumers don’t plug-in their cars as often as thought, indicating a …
-
Συμβολή στην ανάπτυξη συστημάτων ασύρματης επαγωγικής φόρτισης ηλεκτρικών οχημάτων
Inductive charging, which allows the wireless transfer of energy between the Electric Vehicle (EV) and the charging station, appears to be a very promising charging solution. Apart from the ability to transfer energy in a contactless way while the EV is parked over the station (i.e. static …
-
Electrification and lightning in simulated supercell and non-supercell thunderstorms.
Three parameterizations of a noninductive graupel-ice mechanism and various strengths of inductive graupel-droplet charging were tested. For a given storm type, the charge distribution and lightning produced by the different parameterizations had several similarities, but also important …
-
Embedded Power Active Contact Lens
… to communicate with a 2.4GHz system and provide inductive charging operating at 13.56 MHz. The lens utilizes a CBC005 5µAh thin film battery by Cymbet as a power source. A custom IC was designed using the On Semiconductor CMOS C5 0.6 µm process to manage the battery and drive the display. A …
-
INTEGRATED INDUCTIVE AND CONDUCTIVE CHARGING SYSTEM FOR ELECTRIC VEHICLES
… of autonomous vehicles has shaped wireless charging as an attractive solution in favor of complete autonomy. As long as the wireless charging infrastructure, as well as interoperability standards, are not completely developed, wired and wireless chargers have to co-exist onboard the vehicles …
-
Resident AUV design and preliminary testing for autonomous docking and charging at Kilo Nalu observatory
… to charge and exchange data. New, wireless, inductive charging systems show promise for RAUVs over their wired counterparts because wireless systems are less susceptible to damage via seawater corrosion and permit successful RAUV docking after a mission under less stringent positioning …
-
Design and Fabrication Techniques of Devices for Embedded Power Active Contact Lens
… communication with a 2.4GHz system, as well as inductive charging at an operating frequency of 13.56 MHz. The lens utilized a CBC005 5µAh thin film battery by Cymbet and a manufactured graphene super capacitor as a power source. The custom integrated circuit (IC) was designed using the On …
-
Understanding the surprising variation in storm charge structures on 4 June 2012 over West Texas
… whether entrainment can enhance positive graupel charging in the mid-levels and produce anomalous charge structures. Idealized storm simulations in these environments provided two important insights. First, the updrafts' effective supercooled liquid water and rime accretion rates, important …
-
Sida 1 av 81 Navigating Technology Adoption in Industries Undergoing Twin Transition A Case Study on Electrification and Automation in Road Haulage
… A critical bottleneck in this transition is the charging infrastructure, where current cable charging requires manual interaction, posing a barrier to fully autonomous vehicles. The aim of this thesis is to examine the determinants of technology adoption and diffusion during the early stages of …
-
Loosely Coupled Transformer and Tuning Network Design for High-Efficiency Inductive Power Transfer Systems
… is the last wire that has yet to be eliminated. Inductive power transfer (IPT) has drawn substantial interest in both academia and industry due to its advantages including convenience, nonexistence of cable and connector, no electric shock issue, ability to work under some extreme environment, …
-
A Novel Approach to Resident AUV Docking
… Hawai'i. The docking station provides a wireless charging and data transfer pad for R-AUVs at the Kilo Nalu Observatory. The proposed design features a magnetic docking guidance system consisting of a circular array of momentary release holding magnets underneath a flat, flush landing surface, …
-
Induktiv laddning av batteridrivna fordon under drift
… greenhouse gases. The project aims to develop an inductive charging technology for battery-powered vehicles while driving, a technology that can decrease the negative traits of charging and travel distances since the car would be charged during driving. The project resulted in a circuit where both …
-
Investigating the relative contribution of charge deposition in organizing charge within a thunderstorm
… Simulation (COMMAS) contains microphysical charging and branched lightning parameterizations. The model produces fairly realistic representations of intra-cloud (IC) and cloud-to-ground (CG) flashes that concur with previous observational analyses. Two simulations were run using soundings …
Page 1 of 2