Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Inductor Current Ripple"”.
-
Boost Converter Inductor Sizing Effects on the Performance of MPPT Algorithms
… underserved topic of research is the effect of inductor current ripple on performance of Maximum Power Point Tracking (MPPT) algorithms. Many new topologies are focused on decreasing the ripple from PV source to increase efficiency and power output. However, not much has been done to show ripple …
-
Study on Three-level DC/DC Converter with Coupled Inductors
… phased legs offer the benefit of output current ripple reduction, while inversed coupled inductors can suppress the circulating current between phase legs. Compared with conventional non-interleaving three-level DC/DC converter with non-coupling inductors, both inductor current ripple and …
-
A High Frequency Multilevel Boost Power Factor Correction Approach with GaN Semiconductors
… utilizes low voltage GaN semiconductors, reduces inductor voltage, increases inductor current ripple frequency, and reduces capacitor voltage ratings to achieve a high power density and high efficiency design. The multilevel topology is fully modular and can be scaled to higher voltage levels …
-
Design and analysis of an active power factor correction circuit
… described. Design equations relating the boost inductor current ripple to the circuit components selection and circuit performance arc discussed. A computer-aided design program (CADO) is developed to give the optimal circuit components selection. A 500 watt, 300 volt experimental circuit is …
-
High Power High Frequency 3-level NPC Power Conversion System
… analysis for loss and neutral voltage ripple tradeoff. An improved SVM method is proposed to reduce NP imbalance and switching loss simultaneously. This method also ensures an evenly distributed device loss in each phase leg and gives a constant system efficiency under different power …
-
Sensorless Digital Control for Solar DC Optimizers Used in DC Microgrids
… task is done through a variable frequency peak current mode (PCM) control technique. Implementing this ZVS control scheme increases the input inductor current ripple. Therefore, an interleaved structure is used, which is able to reduce the input current ripple through the phase shifting of the …
-
DM EMI Noise Analysis for Single Channel and Interleaved Boost PFC in Critical Conduction Mode
… loss of the main switch. However, the large inductor current ripple in CRM PFC creates huge DM EMI noise, which requires a big EMI filter. The switching frequency of the CRM PFC is variable in half line cycle which makes the EMI characteristics of the CRM PFC are not clear and have not been …
-
Techniques for Miniaturization and Integration of Low-Power Isolated and Non-isolated DC-DC Converters
… This topology exhibits inherent balancing of the inductor phase currents and inherent stabilization of the flying capacitor voltages. A prototype demonstrates peak operating efficiencies of 94.5% for 48V to 1V operation and 95.9% for 24V to 1V operation. A novel modulation scheme for dc-dc …
-
Investigation on Interleaved Boost Converters and Applications
… power density due to the large EMI filter and inductor size. Interleaved multi-channel boost PFC is a promising candidate to meet those challenges, but the interleaved boost converter is a less explored area. On the other hand, the multi-channel interleaved buck converter for the VR application …
-
Analysis and Optimization of the Two-Phase Series Capacitor Buck DC-DC Converter
Current sharing schemes for conventional multi-phase converters are based on sensing each phase current to deliver the current information to their controllers. In conventional buck converters, this fact may require a preset current sharing ratio at the expense of efficiency, which eventually …
-
Investigations into design and control of power electronic systems for future microprocessor power supplies
… These modules are expected to deliver high currents upto 200A at low output voltages of around 1.2V. In order to reduce losses, microprocessors use dynamic voltage scaling, whereby the supply voltage to the microprocessor is adjusted with the computation load. To this end, the processor …
-
A Novel Inverse Charge Constant On-Time Control for High Performance Voltage Regulators
… Thus, the variable-frequency constant on-time current-mode (COTCM) control scheme is widely used in the VRs, as it can automatically reduce its switching frequency during light-load conditions. But, from transient point of view, it has some limitations in response to heavy-load demands by …
-
SiC-Based High-Frequency Soft-Switching Three-Phase Rectifiers/Inverters
… high efficiency are demanded. According to the current industry practice, with a power rating between 10 and 30 kW, the power density are limited by silicon (Si) power semiconductor devices, which make the systems operate at only up to around 30 kHz. The emerging wide bandgap (WBG) power …
-
Small-signal Analysis and Design of Constant-on-time V2 Control for Ceramic Caps
… due to small size and small output voltage ripple requirement. However, for the converters with ceramic caps, the conventional V2 control suffers from the sub-harmonic oscillation due to the lagging phase of the capacitor voltage ripple relative to the inductor current ripple. Two solutions …
-
Equivalent Circuit Model for Current Mode Controls and Its Extensions
Current-mode control architectures have been an indispensable technique in many applications, such as Voltage Regulator, Point-of-load converters, power factor correction, battery charger and LED driver. Since the inductor current ramp is used in the modulator in current-mode control without any …
-
Modulation and Control for High-Frequency GaN-Based Bidirectional AC--DC Converters
Alternating-current--direct-current (AC--DC) converters serve as a critical interface between the electric grid and direct-current (DC) loads. With the increasing demand for data center power consumption, renewable energy systems, energy storage systems, electric vehicles (EVs), AC--DC converters …