Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"Inelastic Strain"”.
-
Hollow Structural Sections Subjected to Inelastic Strain Reversals
… to evaluate the loss in flexural capacity due to inelastic cyclic loads, and to construct the load-deflection and moment-curvature hysteresis loops. </p> <p> A comparison is made between the flange slenderness requirements of both HSS and wide flange rot led sections capable of resisting the same …
-
Round Hollow Structural Sections Subjected to Inelastic Strain Reversals
… of Round Hollow Structural Sections subjected to inelastic strain reversals. An attempt is made to establish a preliminary guideline for choosing a reasonable value for the slenderness ratio (D/t) that qualifies the Round HSS for cyclic loading. </p> <p> An experimental programme on nine sections …
-
Accumulated inelastic strain based damage modeling of pressure vessel steels in air
… model has been implemented and calibrated to strain-life fatigue tests conducted in air on AISI4130 steel removed from an DOT3AA cylinder. The modeling results are used to compare each of the three test methods to in-service conditions. The resulting framework can be built upon to incorporate …
-
Fatigue Life and Inelastic Strain Response Under Complex Histories for Analloy Steel
Made available in DSpace on 2014-12-12T00:25:48Z (GMT). No. of bitstreams: 1 7309919.pdf: 2271984 bytes, checksum: fcab75ff18398fe0abc01b06c6fb456a (MD5) Previous issue date: 1972
-
Characterization of Inelastic Strain in Type 316H Austenitic Stainless Steel using Electron Backscatter Diffraction
… service conditions such as the type of loading, strain rate, load and temperature histories and the environment have to be considered in assessing the remaining safe lifetime of plant operating at high temperature, so that fatigue and creep-fatigue damage can be quantified to ensure that the …
-
Creep Damage And Fracture Mechanics Of High Temperature Materials
… of back stress significantly increases the inelastic strain accumulation in a cyclic test. The accumulated inelastic strain at long times are sensitive to the initial condition (e.g. whether one starts with tension or compression). We define a ratcheting ratio to quantify the interaction of …
-
Experimental and Theoretical Assessment of PBGA Reliability in Conjunction with Field-Use Conditions
… The models employ two damage-metrics, namely inelastic strain and inelastic strain energy density, to predict the solder joint fatigue life. The theoretical predictions have been validated through air-to-air in-house thermal cycling tests carried out between 55 and #61616;C and 125 and …
-
Processing and characterization of NiTi Shape Memory Alloy particle reinforced Sn-In solder
… causes an appreciable reduction of the total inelastic strain range during cycling.
-
Experimental study of inelastic stress concentration around a circular notch
… be used to predict elastic-plastic stresses and strains near a circular notch for 7075-T6 aluminum alloys and ARALL 4 composites. The loading conditions were tension and four-point bending. Glinka and Neuber have developed relations that predict local inelastic strain response based on the …
-
Thermomechanical behavior of monolithic Sn-Ag-Cu solder and copper fiber reinforced solders
… The composite solders were found to reduce the inelastic strain range of the joint relative to monolithic solder, but at the expense of increased stress range.
-
Simulation of creep in nickel based single crystal superalloys
… and recognizes the fact that these materials are inelastic and dissipate energy. A framework, built on the idea of evolving of natural configurations, utilizing the maximization of the rate of dissipation, has been used to formulate the model. The specific model is constructed by specifying forms …
-
Determination of the dynamic strength of iron at low temperature
Measurements of the stress sensitivity of the strain rate and of the strain vs stress in a titanium-doped, "interstitial free" (IF) iron were done at three temperatures, -20, -50 and -75° C. By application of a deformation model, based on a new theory of mobile dislocation density, these …
-
Determination of the dynamic strength of iron at low temperature
Measurements of the stress sensitivity of the strain rate and of the strain vs stress in a titanium-doped, "interstitial free" (IF) iron were done at three temperatures, -20, -50 and -75 °C. By application of a deformation model, based on a new theory of mobile dislocation density, these …
-
Predictive Failure Model for Flip Chip on Board Component Level Assemblies
… of failure based approach to develop a low cycle strain based fatigue equation for flip chip component level assemblies. The critical factors in determining reliability performance were established via experimental investigation and their influence quantified via regression analysis. This …
-
NEW AND IMPROVED TECHNIQUES FOR CHARACTERIZING BRITTLE ROCK RESPONSE
… compression test is improved using inelastic strain as the control parameter. Indentation test as a simple and fast brittleness evaluation method is used to indent on four lithologies, the indentation displacement (depth) is considered as the brittleness index; Hydraulic fractures …
-
Air Plasma Sprayed Thermal Barrier Coatings: Experiments and Finite Element Analysis
… in the model. From the modeling results, certain inelastic strain output was shown to provide the necessary time and temperature dependent features a damage parameter would need to accurately predict failure lives
-
Experimental analysis of the extension to shear fracture transition in Berea Sandstone
… from 10 to 160 MPa confining pressure at strain rates of 10-4 s-1 and 10-5 s-1. Acoustic emission counts were monitored when extending samples at a slow strain rate. Stress at fracture is characterized by the least compressive principal stress, ??3, and maximum compressive principal …
-
Effects of Pore Fluid Pressure on Extension and Hybrid Fractures in Berea Sandstone
… 10 to 130 MPa indicate that fracture strength, inelastic strain, and strain at failure, fracture angle to 1', and the amount of comminution increase with 1', and that the transition of extension to shear fracture occurs at 1' = 30 MPa. All the saturated or pore fluid pressure-controlled test …
-
Activation Volume Determination in FCC Nanopillars
… response to an instantaneous change in the inelastic strain rate. V* values were measured for polycrystalline nickel (Ni) and copper (Cu) nano-pillars, fabricated in-house by electron beam lithography and electroplating processes, using a new strain rate change test procedure developed for …
-
Nanostructured Materials under Ion and Microwave Radiation
… energy ions in focused ion beams, produces inelastic strain in polycrystalline thin metallic films. This results in the bending of thin strips of metallic films, which cannot be explained by elastic models. The concept of ion-induced plastic strain implies the insertion of adatoms into grain …
Page 1 of 3