Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"Inertial Fusion"”.
-
Digital Video Stabilization with Inertial Fusion
… a digital stabilization method that incorporates inertial fusion with a Kalman filter. The camera motion is derived visually by tracking SIFT features in the video feed and fitting them to an affine model. The digital motion is fused with a 3 axis rotational motion measured by an inertial …
-
Characterizing laser-heated plasma energy density distributions for magnetized liner inertial fusion
Magnetized Linear Inertial Fusion (MagLIF) is an inertial confinement fusion (ICF) concept being pursued at Sandia National Laboratories [1]. It uses fusion fuel preheating via a laser. A subsequent cylindrical liner implosion and magnetic flux compression brings this fuel to fusion conditions. …
-
Shock Attenuation in Two-Phase (Gas-Liquid) Jets for Inertial Fusion Applications
Z-Pinch IFE (Inertial Fusion Energy) reactor designs will likely utilize high yield targets (~ 3 GJ) at low repetition rates (~ 0.1 Hz). Appropriately arranged thick liquid jets can protect the cavity walls from the target x-rays, ions, and neutrons. However, the shock waves and mechanical loadings …
-
Modeling of Radiation-Induced Effects in Thick Liquid Wall Inertial Fusion Energy Chambers
… the extreme radiation environment encountered in inertial fusion energy chambers. By interposing a thick, flowing liquid blanket between the fusion target and structural components, these systems aim to reduce first wall loading, extend component lifetimes, and enable high-repetition-rate …
-
Experimental studies of high-energy-density magnetized plasmas: in route to magneto-inertial fusion
This thesis is devoted to the exploration of magnetized high-energy density (HED)plasmas driven by laser along with the understanding of the physics involved in the magnetic field (B-field) generation using laser-driven coil targets (LDCs). The latter is one of the possible strategies to magnetize …
-
Investigating temperature distributions and thermal conduction effects in laser-heated plasmas relevant to Magnetized Liner Inertial Fusion
… implosion is a crucial step in Magnetized Liner Inertial Fusion (MagLIF). Experiments investigating this stage have been performed at Sandia National Laboratories. In these experiments, deuterium fuel within a cylindrical pipe, or liner, was heated using 527 nm laser light from the Z Beamlet …
-
Flight and Stability of a Laser Inertial Fusion Energy Target in the Drift Region Between Injection and the Reaction Chamber with Computational Fluid Dynamics
A Laser Inertial Fusion Energy (LIFE) target’s flight through a low Reynolds number and high Mach number regime was analyzed with computational fluid dynamics software. This regime consisted of xenon gas at 1,050 K and approximately 6,670 Pa. Simulations with similar flow conditions were performed …
-
Magnetohydrodynamic Simulations of Fast Instability Development in Pulsed-Power--Driven Explosions and Implosions of Electrical Conductors
Recent concepts for controlled magneto-inertial fusion (MIF), such as magnetized liner inertial fusion (MagLIF), have suffered from magnetohydrodynamic (MHD) instabilities that lead to degradations in fusion yield. High levels of azimuthally-correlated MHD instability structures have been observed …
-
Interaction of liquid droplets with low-temperature, low-pressure plasma
The chamber walls in inertial fusion reactors must be protected from the photons and ions resulting from the target explosions. One way this can be accomplished is through a sacrificial liquid wall composed of either liquid jets or thin liquid films. The x-rays produced by the exploding targets …
-
Nonlocal transport in fusion-relevant plasmas
Trying to accurately predict results of fusion experiments by means of computer simulations has long been a formidable challenge in both inertial and magnetic confinement approaches. This thesis evaluates and builds on three different models suggested for approximating 'nonlocal' corrections to …
-
Dynamics and free-surface geometry of turbulent liquid sheets
… been proposed to protect solid structures in fusion power plants by attenuating damaging radiation. For the High-Yield Lithium-Injection Fusion Energy (HYLIFE-II) inertial fusion energy (IFE) power plant concept, arrays of molten-salt sheets form a sacrificial barrier between the fusion event …
-
MULTI-SENSOR STATE ESTIMATION FOR MICRO AERIAL VEHICLES IN COMPLEX ENVIRONMENTS
… scenarios, we develop a laser-based multi-sensor fusion method using Kalman filter. For general 3D environments, we propose a hybrid approach for stereo-inertial sensors leveraging the advantages of both feature-based tracking and visual-inertial fusion. For GPS-denied state estimation at night, …
-
Advanced applications for 0.53 laser light
… option for advanced applications ranging from inertial fusion to production of compact x-ray sources. Particular attention is given to the potential use of 0.53 micrometers light to produce a high-energy x-ray source. This application requires the efficient generation of high-energy electrons …
-
CONTROL AND TRANSPORT OF INTENSE ELECTRON BEAMS
… with high-intensity beams such as heavy-ion inertial fusion, spallation neutron sources, and intense light sources requires tight control of beam characteristics over long distances. The University of Maryland Electron Ring (UMER), which uses low energy, high current electron beams to model …
-
Navigating the Unknown: Radar–Inertial Localization for All-Terrain Autonomous Vehicles in GNSS-denied Environments
… conditions. This thesis introduces a radar–inertial navigation framework tailored to two operational modes. First, an Adaptive Error-State Extended Kalman Filter fuses Doppler velocities from automotive 4D radar with IMU data and refines noise parameters in real time for unstructured …
-
Fusion neutron transient effects to charge coupled device camera images
… while being used a diagnostic tool during inertial fusion events at the National Ignition Facility. The simulated images were created from data obtained at the Rotating Target Neutron Source. The Contrast Transfer Function (CTF), autocorrelation function and visual comparisons were used as …
-
A study on dense plasmas using molecular dynamics and X-ray scattering techniques
… of neutron stars, as well as the inside of inertial fusion experiments, in the warm dense matter (WDM) regime. This type of matter, defined by temperatures of several electronvolts and densities comparable to solids, is characterised by long-range Coulomb interactions between ions and …
-
Measurements of Magnetic Compression and Melt of Electrically Thick Metals Driven by Lineal Current Densities Characteristic of Pulsed-Power-Driven Fusion Devices
… role in the stability and performance of fusion concepts such as magnetized liner inertial fusion (MagLIF). A host of diagnostics, such as high-speed imaging, PDV, and laser shadowgraphy, tracked the surface motion and instability growth on mm-diameter aluminum rods driven to megampere …
-
Neutron Source Reconstruction from One-Dimensional Imager of Neutrons at the Z Facility
Magnetized Liner Inertial Fusion is a concept fielded at Sandia National Laboratories’ Z facility which uses deuterium fuel to produce 2.45 MeV neutrons upon reaching thermonuclear conditions. Characterizing the spatial structure of neutron production is expected to play a crucial role in improving …
Page 1 of 2