Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Infill density"”.

  1. Optimizing Infill Density for Fabricating Novel Radio Frequency Devices Utilizing Additive Manufacturing

    … permittivity, an electrical property, and infill density, a key 3D printing process parameter. It further explored the relationship in various infill patterns and examined the effect of solid layers on the relative permittivity of 3D printed substrates. The relationship was investigated in …

    mississippi Repository record for Optimizing Infill Density for Fabricating Novel Radio Frequency Devices Utilizing Additive Manufacturing (opens in a new tab)

  2. Hot-Melt Extrusion Based Fused Deposition Modeling 3D Printing of Atorvastatin Calcium Tablets: Impact of Shape and Infill Density on Printability and Performance

    … of shapes (heart and round shape tablets) and infill densities (50% and 100%) on drug release profiles of tablets prepared by hot melt extrusion (HME) coupled fused deposition modeling (FDM) technique. Two different commercial FDM 3D printers with different filament feeding mechanisms were …

    mississippi Repository record for Hot-Melt Extrusion Based Fused Deposition Modeling 3D Printing of Atorvastatin Calcium Tablets: Impact of Shape and Infill Density on Printability and Performance (opens in a new tab)

  3. 3D Printing and Mechanical Performance of Silicone Elastomers

    … silicone elastomer was 3D printed. The relative density of printed specimens was determined as a function of infill density specified in the software and the relationship was found to be non-linear and dependent on the sample geometry. Printed test specimens with a range of infill densities and …

    umn Repository record for 3D Printing and Mechanical Performance of Silicone Elastomers (opens in a new tab)

  4. 3D Printed Self-Activated Carbon Electrodes for Supercapacitor Applications

    … a new approach to achieving high energy density supercapacitors (SCs) by using high surface area self-activated carbon from waste coffee grounds (WCGs) and modifying 3D printed electrodes' porous structure by varying infill density. The derived activated carbons' surface area, pore size, …

    unt Repository record for 3D Printed Self-Activated Carbon Electrodes for Supercapacitor Applications (opens in a new tab)

  5. Development of a Vision-based Monitoring System for Quality Assessment of 3D Printing

    … methods for assessing the size, shape and infill density of printed objects. The proposed system utilizes background subtraction for isolating the printed object from the background and estimating its size through pixel length analysis and bounding box calculation. The shape analysis of the …

    cent-lancashire Repository record for Development of a Vision-based Monitoring System for Quality Assessment of 3D Printing (opens in a new tab) Download PDF for Development of a Vision-based Monitoring System for Quality Assessment of 3D Printing (opens in a new tab)

  6. Investigation into the Influence of Build Parameters on Failure of 3D Printed Parts

    … that three key factors, width, thickness, infill density, and their interactions, significantly affect the tensile properties of 3D printed test samples.

    maryland Repository record for Investigation into the Influence of Build Parameters on Failure of 3D Printed Parts (opens in a new tab)

  7. Femoral Biomechanical Analyses and 3D Printed Femoral Diaphysis for Biomechanical Simulation

    … and the influence of printing orientations, infill density, wall layers, resolution, and other printing parameters were explored to develop parameters that can be generalized for future biomechanical analyses. RESULTS: A total of 723 cadaveric specimens were evaluated, with a weighted average …

    utswmed Repository record for Femoral Biomechanical Analyses and 3D Printed Femoral Diaphysis for Biomechanical Simulation (opens in a new tab)

  8. 4D printing of smart co-extruded wire-fibre polymer composites

    … study demonstrates that fibre orientation and infill density can program the shape memory response of co-extruded shape memory polymer/continuous carbon fibre composites by balancing shape fixity and recovery. A cross-fibre layout at 40% infill density provides the most balanced performance, …

    aalto Repository record for 4D printing of smart co-extruded wire-fibre polymer composites (opens in a new tab)

  9. Optimization of orocessing parameters for 3D printed product using Taguchi method and desirability function analysis

    … conducted for the FDM variable parameters of the infill pattern, infill density, layer height, printing speed, printing temperature, and wall thickness. Design of the experiment approach is used to determine the best combination of the chosen parameters. A L18 orthogonal design method is employed …

    manitoba Repository record for Optimization of orocessing parameters for 3D printed product using Taguchi method and desirability function analysis (opens in a new tab)

  10. Development and validation of a multi-material extrusion additive manufacturing method

    … I explore variations in matrix material, infill density, infill type, and fiber reinforcement. 2D localized strain analysis is presented via digital image correlation to analyze coupon failures, multi-material interactions, and infill and fiber-reinforcement effectiveness. Material testing …

    colo-mines Repository record for Development and validation of a multi-material extrusion additive manufacturing method (opens in a new tab)

  11. Extrusion 3D printing of kaolinite ceramic filter for water treatment applications

    … with the ability to choose different flow, infill density, wall thickness, etc. The first part of the research focuses on printing parameters optimization to find the best extruding printing for fabricating samples of the best quality with minimum defects. An easy-to-use and cost-friendly …

    regina Repository record for Extrusion 3D printing of kaolinite ceramic filter for water treatment applications (opens in a new tab)

  12. 3D Printability of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and Poly(lactic acid) (PLA) Based Blends using Fused Filament Fabrication

    … speed, layer thickness, raster design and infill density. This study reveals that proper diffusion-based fusion between layers is a critical component of 3D printing bioplastics in FFF and that design customization is required to achieve an optimal mechanical performance.

    guelph Repository record for 3D Printability of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and Poly(lactic acid) (PLA) Based Blends using Fused Filament Fabrication (opens in a new tab)

  13. Development of 3D printed controlled drug delivery systems by dual Fused Deposition Modelling (FDM): Role of formulation and internal geometry on modulation of drug release

    … compartment of Model 2 was printed with a lower infill density (50% vs 100%) and a fully sealed top surface. In vitro drug release studies demonstrated that the bicompartmental DDS showed biphasic drug release profiles: sustained release at pH?1.2 and 6.8 and fast release at pH?7.4. Drug release …

    sevilla Repository record for Development of 3D printed controlled drug delivery systems by dual Fused Deposition Modelling (FDM): Role of formulation and internal geometry on modulation of drug release (opens in a new tab)

  14. Enhancing the printability of food inks and the structural stability of 3D-printed food through additive food manufacturing

    … properties of the printed samples, various infill densities (20 percent, 40 percent, and 60 percent) and designs (line, concentric, and grid) were employed. The addition of sodium alginate and kelp extract improved the rheological properties, and higher infill density enabled the samples to …

    missouri Repository record for Enhancing the printability of food inks and the structural stability of 3D-printed food through additive food manufacturing (opens in a new tab)

  15. An investigation into the feasibility of Fused Deposition Modelling for 3D printing oral pharmaceuticals

    … (printing speed, printing temperature, and infill density) and their impact on perceived quality attributes of the printed dosage forms (filament printability, weight uniformity, dimensional uniformity, reproducibility, drug release rate, printing road width). Furthermore, some process …

    east-anglia Download PDF for An investigation into the feasibility of Fused Deposition Modelling for 3D printing oral pharmaceuticals (opens in a new tab)

  16. Next generation 3D printing platform for the fabrication of personalized pills

    … batch process. Effect of print geometry and infill density was evaluated to understand the effect on release performance. Aspirin and Nifedipine were selected as model drugs for this study. PAM can be used with direct powder blends for printing. We set up a single step extrusion process for …

    texas Repository record for Next generation 3D printing platform for the fabrication of personalized pills (opens in a new tab)

  17. IDENTIFYING AN OPTIMIZATION TECHNIQUE FOR MAKER USAGE TO ADDRESS COVID-19 SUPPLY SHORTFALLS

    … including layer thickness, print speed, infill density, raster width, and wall thickness.</p> <p>This research will utilize a 2-level fractional factorial design, in which process parameter had a specified upper (+1) and lower (-1) level. By using the upper and lower limits, this study …

    utk-theses Repository record for IDENTIFYING AN OPTIMIZATION TECHNIQUE FOR MAKER USAGE TO ADDRESS COVID-19 SUPPLY SHORTFALLS (opens in a new tab)

  18. Design and Development of Instrumented Foot Form for Testing of Metatarsal Protective Footwear

    … parameters, such as lattice structures, infill density, and unit cell size, were used to produce a foot form with a biofidelic impact response. This design process used an iterative methodology to develop three prototypes of additively manufactured surrogates using engineered hyperelastic …

    waterloo Repository record for Design and Development of Instrumented Foot Form for Testing of Metatarsal Protective Footwear (opens in a new tab)

  19. Personalized 3D-Printed Tablets for Diabetes and Related Complications: Design, Optimization, and Evaluation

    … parameters, such as nozzle printing speed, infill density, printhead temperature, print bed temperature, and external pressure, were carefully optimized to ensure that the fabricated tablets met the desired specifications. The tablets were designed in an oval shape and printed using a …

    mississippi Repository record for Personalized 3D-Printed Tablets for Diabetes and Related Complications: Design, Optimization, and Evaluation (opens in a new tab)

Page 1 of 3