Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"Infill walls"”.
-
Seismic behaviour of masonry infill walls : test and design
Several factors influence the behaviour of infilled frames, which has been studied in the last fifty years. One might assume that so many years of research in one theme might be enough to nearly fully understand it but this is not the case. The new generation of design standards, namely the …
-
Behavior of reinforced concrete frames with masonry infill walls
Out-of-plane behavior and strength of cracked masonry panels cannot be accurately predicted. This report increases the knowledge and understanding of the behavior observed in masonry panels, and provides tools to estimate their ultimate capacities.
-
Response of Two-Way Reinforced Masonry Infill Walls under Blast Loading
… response of non-integral and non-participating infill walls designed to undergo two-way out-of-plane response and detailed to fail in flexure under static loading conditions. Through experimental blast testing and dynamic model validation of reduced-scale walls under a range of design-basis …
-
Seismic In-Plane Response of Reinforced Concrete Frames with Masonry Infill Walls
… after destructive earthquakes indicate that infill walls interact with reinforced concrete (RC) frames in buildings during an earthquake and could cause failure mechanism different than what the frames are originally designed for. A new method to identify the failure modes of RC frames with …
-
SEISMIC BEHAVIOUR FACTOR OF VERTICALLY IRREGULAR REINFORCED CONCRETE FRAMES WITH OR WITHOUT INFILL WALLS
… REINFORCED CONCRETE FRAMES WITH OR WITHOUT INFILL WALLS WERECARRIED OUT. THE RESEARCH CARRIED OUT CONSISTS OF THREE PARTS. 1) CYCLIC STATIC TESTS OF SCALED REINFORCED CONCRETE COLUMNS. 2) DESIGN AND ANALYSES OF PROTOTYPE FRAMES. 3) SHAKING TABLE TESTS OF 1/5.5TH - SCALE REINFORCED CONCRETE …
-
In-plane shake table testing of gravity load designed reinforced concrete frames with unreinforced masonry infill walls
… yielding of the longitudinal bars. The masonry infill walls used as partitions were often ignored by design engineers since such walls were considered as nonstructural architectural elements. However, lessons learned from past earthquakes and from several tests performed have shown that those …
-
Numerical Modelling of Unreinforced Masonry Infill Walls under Seismic Load Considering In-Plane / Out-Of-Plane Interaction
… investigations have recognized that masonry infill walls play a major role in the seismic response of structures. Although their effect may be beneficial in some situations, the walls are also susceptible to high levels of damage, including collapse that can be life-threatening because of the …
-
Experimental and analytical study on the in-and out-of-plane interaction of infill walls subject to combined seismic and energy retrofitting using textile reinforced mortal and thermal insulation
… and thermally insulated masonry elements and infills was examined in this dissertation experimentally and analytically. Structural reinforcement was realized through the use of textile reinforced mortar while regular expanded polystyrene was used for thermal in-sulation. Various specimen …
-
Seismic risk assessment of code-conforming reinforced concrete moment resisting frame buildings : consideration of unreinforced masonry infill wall and soil-structure interactions
… (RC) frames with unreinforced masonry (URM) infill walls has been a concern in areas with high seismic activity. The seismic response of this structural system is usually modelled in the form of global building analysis using simplified procedures without considering the aspects resulting …
-
A Study of the Seismic Performance of Early Multi-Story Steel Frame Structures with Unreinforced Masonry Infill
… frame construction with unreinforced masonry infill walls is a common system found in high-rise structures built in the late nineteenth and early twentieth centuries. Recorded performance of this dual system during seismic events shows that the structures are able to resist a high level of …
-
Evaluation of two RC buildings retrofit with steel bracing
… similar in that diagonal steel braces and RC infill walls were used to stiffen and strengthen the existing frames. The schemes were different in that one had steel bracing in the interior of the building while the other had steel bracing on the exterior of the building.
-
Evaluation of alternative resistance mechanisms for progressive collapse
… compressive arch action, and contributions from infill walls. This research tested a series of three quarter scale two bay by two story frames. The column between the two bays was removed to simulate a collapse scenario. The design of the three frames consisted of discontinuous reinforcement, …
-
Numerical simulation of structures under static and dynamic loading with high performance finite elements
… of the RC buildings are constructed with masonry infill walls. The combination of masonry infill walls with the bearing frame of the structure, however, is often neglected during the design procedure assuming that the structural performance is not influenced. Such an assumption may lead to …
-
Seismic performance of reinforced concrete frames.
… during an earthquake. Furthermore, the use of infill walls is a divisive issue as on positive side dual wall-frame systems have beneficial effects related to strength, stiffness, and ductility. However, if not designed properly infill wall can also lead to undesirable structural failures of …
-
Seismic behaviour of masonry veneer walls
It is recognized that masonry veneer walls, commonly used in commercial, industrial and residential buildings can be vulnerable to earthquakes and most of the reported cases of failures are due to poor materials, design and inadequate construction practices. This inadequate behaviour has promoted …
-
Seismic analysis of a retrofitted reinforced concrete building in Mexico City
… its transverse direction and reinforced concrete infill walls in its longitudinal direction. The retrofitted structure presented minor damage after the 1985 and 2017 earthquakes. The structural response of the building and the effectiveness of the retrofit has been assessed using an analytical …
-
Optimization of timber-based strengthening techniques for the seismic retrofit of existing masonry buildings
… such timber-based elements to the surface of the walls of a building by using mechanical or adhesive point-to-point connections. The analysed solutions see the use of strong-backs and timber panels combined with membranes and insulation layers to obtain integrated and highly efficient …
-
Seismic performance, analysis, and design of hybrid concrete-masonry
… frame with partially grouted and reinforced infill masonry walls. The infill walls are typically connected to the RC frame with cast-in-place dowel reinforcement along one or more edges of the wall. There is limited guidance in masonry codes to design these types of structures, and their …
-
High strain rate constitutive modeling forhistorical structures subjected to blast loading
… addresses iso-damage curves for typical masonry infill walls in Portugal under blast with different loading conditions, which can be adopted for practical use in the case of enclosures. A bomb explosion near a building, in addition to a great deal of casualties and losses, can cause serious …
Page 1 of 3