Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Infiltration method"”.
-
Laboratory calibration of the CS655 soil moisture sensor
… soil types and three different calibration methods. Frequency domain reflectometers estimate soil water content (SWC) using electromagnetic properties of the surrounding media. Few, if any, sensors directly measure volumetric water content. Instead, a sensor’s output must be converted either …
-
Studies on bacterial speck of tomatoes caused by Pseudomonas syringae pv tomato : a thesis presented in fulfilment of a Masterate of Science by thesis only at Massey University
… Young, Dye and Wilkie is adopted. A vacuum infiltration method of artificially inoculating seed was used and P.syringae pv tomato was detected in both artificially and naturally infested seed using sensitive enrichment culture techniques. The pathogen can remain viable between seed harvest …
-
Monitoring near-surface soil water loss with time domain reflectometry and weighing lysimeters
… The TDR probes were calibrated using a transient method known as upward infiltration. The method is rapid, allows the soil to remain unchanged during the experiment, and provides many data points. The upward infiltration method was tested using two different length probes in soils of three …
-
Solid oxide fuel cell cathode infiltrate particle size control and oxygen surface exchange resistance determination
… (IC) composite cathodes produced by the infiltration method have received much attention in the literature due to their low polarization resistance (RP) at intermediate (500-700°C) operating temperatures. Small infiltrated MIEC oxide nano-particle size and low intrinsic MIEC oxygen …
-
Characterization and catalytic applications of silver nanoparticles supported on hierarchically porous SiO_2 and Co_3O_4 monoliths
… SiO2 and Co3O4 monoliths was done by a solution infiltration method using aqueous AgNO3 (silver nitrate) solution followed by reduction with ethylene glycol and hydrazine hydrate. Such monoliths also were used as continuous flow monolithic microreactors for the catalytic activity and stability …
-
Fabrication & Mechanical Properties of Hastelloy-X Matrix Ceramic Composite
… microscopy (SEM) imaging to analyze the pore infiltration. Rockwell hardness and nanoindentation were measured to determine changes in material properties. Through porosity calculations and SEM imaging, it was determined that vacuum was required for the most effective infiltration. The …
-
Simple infiltrated microstructure polarization loss estimation (simple) model validation and its use in predicting solid oxide fuel cell cathode performance
… LSCF loading levels have been made by the infiltration method. The polarization resistance R<sub>P</sub> has been characterized by Electrochemical Impedance Spectroscopy, which decreases with the LSCF loading level. The Simple Infiltration Microstructure Polarization Loss Estimation …
-
Factors Governing the Performance and Stability of Solid Oxide Fuel Cell Cathodes Prepared by Infiltration
Infiltration method, developed at the University of Pennsylvania, is a unique analytical platform for investigating the effect of material properties and electrode microstructure on the performance of solid oxide fuel cell (SOFC) electrodes. During cell fabrication by infiltration, the …
-
ENGINEERING CATHODE ARCHITECTURES FOR SOLID OXIDE CELLS: PATHWAYS TO SUPERIOR ACTIVITY AND STABILITY
… of multiphase nano-catalysts. Using a solution infiltration method, Pr–Sr–Co (PSC) oxide and cobalt-free alternatives Pr–Sr–Ni (PSN) and Pr–Sr–Fe (PSF) oxide-based nano-electrocatalysts were deposited onto Pr and Sm doped mixed-conducting GDC scaffolds as cathode. Optimization of infiltration …
-
Fabrication and Characterisation of High Temperature Superconducting Bulk YBCO
… this is very difficult. Using a liquid phase infiltration method single grain samples of YBCO have been re-joined without the introduction of a grain boundary.</p><p>R(T) and I-V dependencies close to Tc and in zero magnetic field were obtained from single grain samples of YBCO in the nV …
-
The Use of Nanoparticles as a Strategy for the Remineralisation of Dentine Affected by Caries or Acid Erosion
… dentine in a similar manner. Moreover, for methodological reasons, the demineralised dentine requires fixation, but it is unknown if this additional step affects the soundness of the model. The aim of this study was therefore to undertake a detailed and systematic study of dentine …
-
Characterization of Wetting Front Geometry and Fluid Migration in the Vadose Zone Using Surface Time-Lapse Seismic First-Arrival Tomography
… variations at many scales. Many <em>in-situ</em> methods for calculating K (i.e. constant head permeameter method) use surface measurements to quantify subsurface fluid flow. However, the geometry and distribution of the fluid migrating through the subsurface is not determinable from surface …
-
Development of Multifunctional Laser-Induced Graphene Composites and Devices
… first time utilizing the mechanical exfoliation method by Geim and Novoselov in 2004. However, realistic applications of graphene-based materials are limited by the complex synthesis that requires strict experimental conditions or many time-consuming procedures for scale up graphene production. …
-
Processing and Characterization of Ultra High Temperature and High Conductive Composites
… are traditionally manufactured by the melting infiltration method. With this method, the high porosity and brittle structure of fabricated CMCs are not capable of withstanding high mechanical and thermal loads. Alternatively, polymer derived ceramic composites are fabricated by incorporating …
-
Development of Hybrid Polymer Electrolytes with Tailored Mechanical Properties for Lithium Batteries
… of cathode electrolyte interfaces either by infiltration of porous cathodes or by incorporation of the polymer into the cathode slurry. Both methods showed comparable cyclability results with the infiltration method being less labor intensive during the cell preparation. Full cell tests at 60 …
-
Borohydride-based solid electrolytes and polymer composite separators for lithium-ion batteries
… fabricate all solid-state LIBs using the melt infiltration method, to assess the borohydride solid electrolyte performance with various LIB active materials. The cycling data of such cells presented similar voltage profiles and capacity retentions to the cells of the same electrodes with liquid …
-
Designing silica nanoparticles for sustainable agricultural applications
… A liquid chromatography-tandem mass spectrometry method was developed to quantify 3-oxo-C8-HSL, and a modified urea assay was explored for urea quantification. Chapter 3 examines a novel vacuum infiltration method and aims to optimize this process through a systematic study using fluorescent UMNs. …
-
Assessing the feasibility of managed aquifer recharge under uncertainty
… two gaps have been identified as the two major methodological needs for assessing the feasibility of MAR. These methodological gaps are conjointly addressed in the thesis by using an integrated and quantitative approach that considers a range of values for influencing variables from the distinct …
-
The Impact Of Storm Surge, High Intensity Rainfall And Sea Level Rise On Coastal Cities
… Mobile as case studies. Two different research methods are used to evaluate the impact of storm surge, high-intensity rainfall, and sea level rise on these coastal cities. The study first explored the impact of these extreme events on the wastewater treatment system in NYC. A total of 14 …
-
Improving Performance Of Infiltrated Sofc Cathodes Via Scaffold Engineering And Catalyst Surface Engineering
… was developed at Penn. Cathodes made with this method have multiple advantages such as a significantly larger number of reaction sites, the avoidance of solid-state reactions, strong mechanical properties and the match of coefficient of thermal expansion. However, although infiltrated cathodes …
Page 1 of 2