Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Influence Coefficients"”.
-
Influence Coefficients and Stress Distributions for Tapered Transition Sections
… transition section and, for developing the Influence Coefficients, are reduced to digital computer programs for a 1620 IBM computer. Programs are written for transition sections ranging in length from short to semi-infinite and corresponding programs exist for determining the continuous …
-
Minimum distance influence coefficients for obstacle avoidance in manipulator motion planning
… In this report, first and second order influence coefficients for minimum distance magnitudes are developed. These coefficients provide fundamental analytics for rates of change of minimum distance magnitudes and allow for deeper insight into the interaction between a manipulator and its …
-
Synthesizing force systems for motion time response, input-output forces and joint force control using interactive graphics and influence coefficients
"THE PRIMARY OBJECTIVES OF LINKAGE DESIGN: The four design objectives most generally encountered when designing a linkage are: Objective 1: Kinematic, a linkage is geometrically designed to meet kinematic objectives such as rigid body guidance, path generation or function generation. Objective 2: …
-
Vibration Analysis and Design Optimisation Studies of Space Frames - Static Analysis
… space frames, is analysed for establishing its influence coefficients, using the Finite Element Matrix Method. </p> <p> Experimental techniques for measurement of the flexibility influence coefficients of the model are described. </p> <p> Experimental results have been compared against …
-
Application of boundary element methods (BEM) to internal propulsion systems; application to water-jets and inducers
… rocket engine inducers. The source and dipole influence coefficients of the hyperboloid panels are computed using Gauss quadrature. The present method solves the boundary value problem subject to a uniform inflow directly by discretizing the blade, casing/shroud and hub geometries with panels. …
-
On transonic flow over segmented slotted wind tunnel wall with mass transfer
… slots atop the active chamber. The lateral influence due to applied suction and blowing, through a compartment, exceeded only slightly that in the downstream direction. Limited upstream influence was observed. Influence coefficients were determined from the data in the least-square sense for …
-
Transonic aeroelastic analyses
… for adjusting linearised theoretical aerodynamic influence coefficients so that the predicted aerodynamic load distribution on a rigid wing at incidence and at the required Mach number agrees with the measured distribution. Thereafter, it is assumed that these modified influence coefficients, …
-
Wind effects on a full-scale frame
… locations for the middle frame of the building Influence coefficients are obtained for various tap locations on the building. The pressure coefficients obtained from model scale testing of WERFL at UWO boundary layer wind tunnel are combined with the influence coefficients to obtain the desired …
-
Steady state vibrations of framed structures
… mass at the node points where the stiffness influence coefficients are defined. To improve the accuracy of the results, a consistent mass matrix approach is dealt with in few of the latest solutions giving higher degree of precision compared with the results of problems solved by lumped mass …
-
A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors
… and thrust) and investigates the uncertainty influences for these calculations.</p> <p>A data reduction method was developed for this thesis to calculate the engine airflow, net thrust, and specific impulse (ISP) in a ground test of a generic ramjet engine in a free-jet test facility. It …
-
A rational basis for circumferential distortion index formulation
… model which incorporates vortex sheets and influence coefficients. To determine the upstream influence of the compressor on flow field distortion, a model using parallel compressor theory, experimental data from NASA, and a pressure ration equation derived by Hill and Peterson is formulated. …
-
Numerical analysis of normally loaded articulated beams on elastic supports
… uses the numerical integration technique to find influence coefficients, which are used in a general method solution. The alternate methods are not iteration procedures. Examples which apply these methods to various support conditions are given. Advantages of each method are given. Convergence of …
-
Adaptive control of a four-bar linkage
… dynamic model is developed using Kinematic Influence Coefficients. This model is used to develop the adaptive controls and to computer simulate the control scheme performances. The simulated model velocity response is compared qualitatively to experimental data and shown to be similar to an …
-
Analysis of the sensitivity of multi-stage axial compressors to fouling at various stages
… is predicted. Using this baseline geometry, the influence of roughness in the front, middle and rear stages is calculated using empirical data for the enhanced losses and increased deviation, with a stage stacking technique. Influence coefficients that relate percentage changes in one parameter …
-
Approximate Analysis of Load Dstribution in Three-Dimensional Tall Building Structures
… in the height coordinate. A set of flexibility influence coefficients, relating the deflection at any level to any particular load component, is established for each element, the continuum approach being used to analyse individual cores and coupled shear walls, and the shear cantilever analogy …
-
Wind effects on metal edge flashings
… direction). The distributions of wind pressure coefficients (Cp) on each flashing are plotted and discussed. Using the measured wind pressure coefficients (Cp) and influence coefficients (IC) obtained from a Finite Element Analysis, the combined wind effect coefficients (GC) for each flashing …
-
Characterization of Shape Memory Alloys Using Artificial Neural Networks
… identify transformation temperatures and stress influence coefficients of shape memory alloy specimens using strain-temperature coordinates as inputs. Training data is generated through the use of an existing shape memory alloy constitutive model. Factorial and Taguchi-based methods of generating …
Page 1 of 2